Outputs (93)

Indoor characterization of genetically optimized circular rotational square hyperboloid (GOCRSH) concentrator. (2020)
Conference Proceeding
FREIER RAINE, D., MUHAMMAD-SUKKI, F., RAMIREZ-INIGUEZ, R., JAFRY, T., ARDILA-REY, J. A. and GAMIO, C. 2020. Indoor characterization of genetically optimized circular rotational square hyperboloid (GOCRSH) concentrator. In Proceedings of 47th Institute of Electrical and Electronic Engineers (IEEE) Photovoltaic specialists conference 2020 (PVSC 2020), 15 June - 21 August 2020, [virtual conference]. Piscataway: IEEE [online], pages 2600-2604. Available from: https://doi.org/10.1109/pvsc45281.2020.9300920

This paper evaluates the performance of a genetically optimized circular rotational square hyperboloid (GOCRSH) concentrator for low-concentrating photovoltaic (PV) application. The experimental analysis of 4 types of GOCRSH namely the GOCRSH_A GOCRS... Read More about Indoor characterization of genetically optimized circular rotational square hyperboloid (GOCRSH) concentrator..

Computational fluid dynamics modelling to design and optimise power kites for renewable power generation. (2020)
Journal Article
PEGG, C., SURI, Y., ISLAM, S.Z., ASTHANA, A. and HOSSAIN, M. 2020. Computational fluid dynamics modelling to design and optimise power kites for renewable power generation. International journal of design engineering [online], 9(2): energy and sustainable futures, pages 81-100. Available from: https://doi.org/10.1504/IJDE.2020.113057

Power kites provide the potential rewards of obtaining the disused energy supply from high altitude wind. This paper aims to provide a design of power kite and optimise the potential for renewable power generation. The power kite was modelled using c... Read More about Computational fluid dynamics modelling to design and optimise power kites for renewable power generation..

A low-complexity wavelet-based visual saliency model to predict fixations. (2020)
Conference Proceeding
NARAYANASWAMY, M., ZHAO, Y., FUNG, W.K. and FOUGH, N. 2020. A low-complexity wavelet-based visual saliency model to predict fixations. In Proceedings of 27th Institute of Electrical and Electronic Engineers (IEEE) International conference on electronics, circuits and systems 2020 (ICECS 2020), 23-25 November 2020, [virtual conference]. Piscataway: IEEE [online], article ID 9294905. Available from: https://doi.org/10.1109/ICECS49266.2020.9294905

A low-complexity wavelet-based visual saliency model to predict the regions of human eye fixations in images using low-level features is proposed. Unlike the existing wavelet-based saliency detection models, the proposed model requires only two chann... Read More about A low-complexity wavelet-based visual saliency model to predict fixations..

An IoT based industry 4.0 architecture for integration of design and manufacturing systems. (2020)
Journal Article
ANBALAGAN, A. and MORENO-GARCIA, C.F. 2021. An IoT based industry 4.0 architecture for integration of design and manufacturing systems. Materials today: proceedings [online], 46(17): proceedings of 3rd International conference on materials, manufacturing and modelling 2021 (ICMMM 2021), 19-21 March 2021, [virtual conference], pages 7135-7142. Available from: https://doi.org/10.1016/j.matpr.2020.11.196

This paper proposes an Internet of Things (IoT) based 5-stage Industry 4.0 architecture to integrate the design and manufacturing systems in a Cyber Physical Environment (CPE). It considers the transfer of design and manufacturing systems data throug... Read More about An IoT based industry 4.0 architecture for integration of design and manufacturing systems..

Influence of combined empirical functions on slug flow predictions of pipelines with variable inclinations. (2020)
Conference Proceeding
ZANGANEH, H., KURUSHINA, V., SRINIL, N. and MATAR, O.K. 2020. Influence of combined empirical functions on slug flow predictions of pipelines with variable inclinations. In Proceedings of the 39th ASME international conference on ocean, offshore and arctic engineering (OMAE 2020), 3-7 August 2020, [virtual event]. New York: ASME [online], volume 4: pipelines, risers and subsea systems, paper number OMAE2020-18027, V004T04A025. Available from: https://doi.org/10.1115/OMAE2020-18027

Prediction of internal multiphase flows in subsea pipelines is an integral part of the oil and gas production system design. High mass and pressure fluctuations are often encountered during the operation with a liquid-gas slug flow regime exhibiting... Read More about Influence of combined empirical functions on slug flow predictions of pipelines with variable inclinations..

Shock propagation behaviour and determination of Gruneisen state of equation for pultruded polyester/glass fibre-reinforced composites.   (2020)
Journal Article
MUKHERJI, A. and NJUGUNA, J. 2021. Shock propagation behaviour and determination of Gruneisen state of equation for pultruded polyester/glass fibre-reinforced composites. Composite structures [online], 262, article ID 113444. Available from: https://doi.org/10.1016/j.compstruct.2020.113444

Polyester fibres reinforced with glass fibres hybridised polyester resin composite (PFR/GFHC) is a unconventional complex high-molecular weight crosslinked network polymer composite. This novel composite can be used in the manufacture of structural b... Read More about Shock propagation behaviour and determination of Gruneisen state of equation for pultruded polyester/glass fibre-reinforced composites.  .

Numerical simulation of fluid flow, proppant transport and fracture propagation in hydraulic fractures for unconventional reservoirs. (2020)
Thesis
SURI, Y. 2020. Numerical simulation of fluid flow, proppant transport and fracture propagation in hydraulic fractures for unconventional reservoirs. Robert Gordon University, PhD thesis. Hosted on OpenAIR [online]. Available from: https://openair.rgu.ac.uk

The distribution of proppant injected in hydraulic fractures significantly affects fracture-conductivity and well-performance. The proppant transport and suspension in thin fracturing fluid used in unconventional reservoirs are considerably differe... Read More about Numerical simulation of fluid flow, proppant transport and fracture propagation in hydraulic fractures for unconventional reservoirs..

A comparative study on partial discharge emulators. (2020)
Conference Proceeding
MOHAMED, H., KHAN, U., YUSUF, M.A., MOHAMMED, M.M., ALHAJ, M., ALRWEG, M. and ALKHWELDI, M. 2020. A comparative study on partial discharge emulators. In Proceedings of 28th Telecommunications forum 2020 (TELFOR 2020), 24-25 November 2020, Belgrade, Serbia. Piscataway: IEEE [online], article ID 9306600, pages 340-343. Available from: https://doi.org/10.1109/TELFOR51502.2020.9306600

Partial Discharge (PD) detection plays a vital role in electrical power stations, it can help protecting the high voltage equipment, it can prevent explosion of these equipment and hence preventing a catastrophic failure. PD detection can be performe... Read More about A comparative study on partial discharge emulators..

Sand failure: effect of biocide on the geomechanical properties of outcrop carbonate rock under static condition. (2020)
Journal Article
WUYEP, E., OLUYEMI, G., YATES, K. and AKISANYA, A.R. 2020. Sand failure: effect of biocide on the geomechanical properties of outcrop carbonate rock under static condition. Arabian journal of geosciences [online], 13(23), article ID 1239. Available from: https://doi.org/10.1007/s12517-020-06176-y

The effects of chemical interaction of a biocide with formation rocks on the rock geomechanical properties are examined. A combination of analytical tests (Scanning Electron Microscopy/Energy-Dispersive X-Ray Analysis, X-Ray Powder Diffraction and Pa... Read More about Sand failure: effect of biocide on the geomechanical properties of outcrop carbonate rock under static condition..

3D printing for hip implant applications: a review. (2020)
Journal Article
OKOLIE, O., STACHUREK, I., KANDASUBRAMANIAN, B. and NJUGUNA, J. 2020. 3D printing for hip implant applications: a review. Polymers [online], 12(11), articles ID 2682. Available from: https://doi.org/10.3390/polym12112682

There is a rising demand for replacement, regeneration of tissues and organ repairs for patients who suffer from diseased/damaged bones or tissues such as hip pains. The hip replacement treatment relies on the implant, which may not always meet the r... Read More about 3D printing for hip implant applications: a review..