Outputs (26)

A framework for knowledge capture and recovery in whole life costing practice. (2017)
Thesis
TOBIN, N.Y. 2017. A framework for knowledge capture and recovery in whole life costing practice. Robert Gordon University, PhD thesis.

In spite of the benefits of implementing whole life costing technique as a valuable approach for comparing alternative building designs allowing operational cost benefits to be evaluated against any initial cost increases and also as part of procurem... Read More about A framework for knowledge capture and recovery in whole life costing practice..

Renewable energy technologies assessment in providing sustainable electricity to Nigerian rural areas. (2017)
Thesis
GARBA, A. 2017. Renewable energy technologies assessment in providing sustainable electricity to Nigerian rural areas. Robert Gordon University, PhD thesis.

The research work that underpins this thesis aims to investigate the viability of renewable energy technologies (RETs) and to develop a RETs implementation framework for providing sustainable electricity to Nigerias rural areas. As a result of electr... Read More about Renewable energy technologies assessment in providing sustainable electricity to Nigerian rural areas..

The allocation of risks in the Saudi Arabian domestic and regional aviation construction projects. (2017)
Thesis
BAGHDADI, A.M.A. 2017. The allocation of risks in the Saudi Arabian domestic and regional aviation construction projects. Robert Gordon University, PhD thesis.

Airports projects, amongst other construction projects, are considered very complex as they face a number of challenges that inevitably cause them to become exposed to risks. In Saudi Arabia, the sector of aviation is considered an important sector o... Read More about The allocation of risks in the Saudi Arabian domestic and regional aviation construction projects..

A techno-economic comparison of biomass thermo-chemical systems for sustainable electricity in Nigerian rural areas. (2016)
Conference Proceeding
GARBA, A. and KISHK, M. 2016. A techno-economic comparison of biomass thermo-chemical systems for sustainable electricity in Nigerian rural areas. In Proceedings of the 5th Institution of Engineering and Technology (IET) International renewable power generation conference (RPG 2016), 21-23 September 2016, London, UK. New York: IET [online], article ID 558. Available from: https://doi.org/10.1049/cp.2016.0558.

Biomass thermo-chemical systems (BTCS) source remains one of the means of providing sustainable electricity to rural areas in developing nations. Due the dwindling power generation and supply in Nigeria representing between 10 and 34%, the rural comm... Read More about A techno-economic comparison of biomass thermo-chemical systems for sustainable electricity in Nigerian rural areas..

A comparative study of biomass energy technologies for sustainable electricity in Nigerian rural areas. (2016)
Conference Proceeding
GARBA, A., KISHK, M. and MOORE, D.R. 2016. A comparative study of biomass energy technologies for sustainable electricity in Nigerian rural areas. In Chan, P.W. and Neilson, C.J. (eds.) Proceedings of the 32nd Association of Researchers in Construction Management (ARCOM) conference, 5-7 September 2016, Manchester, UK. Manchester: ARCOM [online], 1161-1170. Available from: http://www.arcom.ac.uk/-docs/proceedings/057655af863b28ec730c77bb0d199e51.pdf

Biomass as a Renewable Energy Technology (RET) is used to provide sustainable electricity to rural areas in several developing countries. As a result of dwindling power generation and supply in Nigeria representing between 10 and 34%, the rural commu... Read More about A comparative study of biomass energy technologies for sustainable electricity in Nigerian rural areas..

Economic assessment of biomass gasification technology in providing sustainable electricity in Nigerian rural areas. (2015)
Conference Proceeding
GARBA, A. and KISHK, M. 2015. Economic assessment of biomass gasification technology in providing sustainable electricity in Nigerian rural areas. In Proceedings of the 1st International sustainable ecological engineering design for society conference 2015 (SEEDS): healthy, energy efficient buildings and spaces, 17-18 September 2015, Leeds, UK. Leeds: Leeds Beckett University [online], pages 281-292. Available from: https://www.leedsbeckett.ac.uk/as/cebe/seeds/seeds2015_proceedings.pdf

Renewable Energy Technologies (RET) in general, and biomass source in particular, remains one of the means of providing sustainable electricity to rural areas in developing countries. This is because of its strategic value in identifying when and whe... Read More about Economic assessment of biomass gasification technology in providing sustainable electricity in Nigerian rural areas..

Saudi Arabian aviation construction projects: identification of risks and their consequences. (2015)
Conference Proceeding
BAGHDADI, A. and KISHK, M. 2015. Saudi Arabian aviation construction projects: identification of risks and their consequences. In Hajdu, M. and Skibniewski, M. (eds.) Proceedings of the 2015 Creative construction conference (CCC2015), 21-24 June 2015, Krakow, Poland. Budapest: Diamond Congress [online], pages 154-159. Available from: http://2015.creative-construction-conference.com/wp-content/uploads/2015/07/CCC2015_proceedings.pdf

Airport projects are considered to be very complex, as they face a number of challenges which inevitably expose them to risks. In Saudi Arabia, the aviation sector is considered an important sector due to the fact that Saudi Arabia is the first desti... Read More about Saudi Arabian aviation construction projects: identification of risks and their consequences..

Renewable energy technology means of providing sustainable electricity in Nigerian rural areas: a review. (2014)
Conference Proceeding
GARBA, A. and KISHK, M. 2014. Renewable energy technology means of providing sustainable electricity in Nigerian rural areas: a review. In Raiden, A. and Aboagye-Nimo, E. (eds.) Proceedings of the 30th Association of Researchers in Construction Management (ARCOM) annual conference, 1-3 September 2014, Portsmouth, UK. Reading: ARCOM [online], pages 143-151. Available from: http://www.arcom.ac.uk/-docs/proceedings/ar2014-0143-0151_Garba_Kishk.pdf

Following the failure of the Power Holding Company of Nigeria (PHCN) and fossil fuel source applications for the provision of electricity in Nigeria, the country has been experiencing power energy shortages for over three decades now. More than 65% o... Read More about Renewable energy technology means of providing sustainable electricity in Nigerian rural areas: a review..

Development of a risk response model to handle delays of construction projects in the United Arab Emirates. (2014)
Thesis
MOTALEB, O.H. 2014. Development of a risk response model to handle delays of construction projects in the United Arab Emirates. Robert Gordon University, PhD thesis.

Due to the complex nature of construction projects, delay risks are more widespread in the construction sector than elsewhere. This poses a problem for the industry, since it is already at risk because of the recent global economic recession. Indeed,... Read More about Development of a risk response model to handle delays of construction projects in the United Arab Emirates..

A decision support model proving 'value for money' selection of elements and components on hospital refurbishments: development of a functioning prototype. (2013)
Journal Article
WILSON, G. and KISHK, M. 2013. A decision support model proving 'value for money' selection of elements and components on hospital refurbishments: development of a functioning prototype. Construction engineering [online], 1(3), pages 53-61. Available from: http://www.seipub.org/ce/Download.aspx?ID=8702

Capital investment in current economic circumstances, is severely challenged. This is especially evident within the NHS built estate. Estate managers and Design Teams have a duty to achieve Value for Money on projects; yet, no measured and standardis... Read More about A decision support model proving 'value for money' selection of elements and components on hospital refurbishments: development of a functioning prototype..