All Outputs (12)

Performance evaluation of (AlCrN) PVD-coated cBN inserts on machining of Inconel 718. (2021)
Journal Article
JEYAPANDIARAJAN, P., XAVIOR, M.A. and ANBALAGAN, A. 2021. Performance evaluation of (AlCrN) PVD-coated cBN inserts on machining of Inconel 718. MM science journal [online], 2021(November): proceedings of the 16th International conference on high speed machining (HSM 2021), 26-27 October 2021, Damstadt, Germany, pages 5219-5227. Available from: http://doi.org./10.17973/MMSJ.2021_11_2021178

This research work focuses on the experimental investigations conducted using uncoated cBN tool and (AlCrN) PVD Coated cBN tool for turning Inconel 718. Two different sets of experiments – one with uncoated cBN and another with coated cBN inserts wer... Read More about Performance evaluation of (AlCrN) PVD-coated cBN inserts on machining of Inconel 718..

A digital twin study for immediate design / redesign of impellers and blades: part 1: CAD modelling and tool path simulation. (2021)
Journal Article
ANBALAGAN, A., SHIVAKRISHNA, B. and SRIKANTH, K.S. 2021. A digital twin study for immediate design / redesign of impellers and blades: part 1: CAD modelling and tool path simulation. Materials today: proceedings [online], 46(17)): proceedings of 3rd International conference on materials, manufacturing and modelling 2021 (ICMMM 2021), 19-21 March 2021, [virtual conference], pages 8209-8217. Available from: https://doi.org/10.1016/j.matpr.2021.03.209

This paper presents a digital twining study conducted for an immediate design / redesign and manufacturing of on impellers and blades. It is by accomplished by developing (i) CAD automation methods, based on the standard modelling procedures and (ii)... Read More about A digital twin study for immediate design / redesign of impellers and blades: part 1: CAD modelling and tool path simulation..

A FEA simulation study of ball end mill for fixed 3+1 / 3+2 axis machining of Ti-6Al-4V. (2021)
Journal Article
ANBALAGAN, A., ARUMUGAM, E. and MICHAEL, A.X. 2021. A FEA simulation study of ball end mill for fixed 3+1 / 3+2 axis machining of Ti-6Al-4V. Materials today: proceedings [online], 46(17): proceedings of 3rd International conference on materials, manufacturing and modelling 2021 (ICMMM 2021), 19-21 March 2021, [virtual conference], pages 7803-7814. Available from: https://doi.org/10.1016/j.matpr.2021.02.369

This paper presents a Finite Element Analysis (FEA) simulation study conducted on ball endmill for fixed 3 + 1 and 3 + 2 axis orientations for machining Ti-6Al-4 V. This work adopts a tungsten carbide (WC) ∅18.6 mm diametrical/6fluted ball endmill to... Read More about A FEA simulation study of ball end mill for fixed 3+1 / 3+2 axis machining of Ti-6Al-4V..

An IoT based industry 4.0 architecture for integration of design and manufacturing systems. (2020)
Journal Article
ANBALAGAN, A. and MORENO-GARCIA, C.F. 2021. An IoT based industry 4.0 architecture for integration of design and manufacturing systems. Materials today: proceedings [online], 46(17): proceedings of 3rd International conference on materials, manufacturing and modelling 2021 (ICMMM 2021), 19-21 March 2021, [virtual conference], pages 7135-7142. Available from: https://doi.org/10.1016/j.matpr.2020.11.196

This paper proposes an Internet of Things (IoT) based 5-stage Industry 4.0 architecture to integrate the design and manufacturing systems in a Cyber Physical Environment (CPE). It considers the transfer of design and manufacturing systems data throug... Read More about An IoT based industry 4.0 architecture for integration of design and manufacturing systems..

Toolpath algorithm for free form irregular contoured walls / surfaces with internal deflecting connections. (2020)
Journal Article
ARIVAZHAGAN, A. 2020. Toolpath algorithm for free form irregular contoured walls/surfaces with internal deflecting connections. Materials today: proceedings [online], 22(4): proceedings of 2nd International materials, manufacturing and modelling conference 2019 (ICMMM 2019), 29-31 March 2019, Vellore, India, pages 3037-3047. Available from: https://doi.org/10.1016/j.matpr.2020.03.439

This paper presents a toolpath generation method to efficiently machine free form irregular contoured walls / surfaces (FIWS) containing internal deflecting connections (IDC’s). The toolpath generation method is based on a series of identifications a... Read More about Toolpath algorithm for free form irregular contoured walls / surfaces with internal deflecting connections..

FEM analysis to optimally design end mill cutters for milling of Ti-6Al-4V. (2014)
Journal Article
KUMAR, V., EAKAMBARAM, A. and ARIVAZHAGAN, A. 2014. FEM analysis to optimally design end mill cutters for milling of Ti-6Al-4 V. Procedia engineering [online], 97: proceedings of 12th Global congress on manufacturing and management 2014 (GCMM 2014), 8-10 December 2014, Vellore, India, pages 1237-1246. Available from: https://doi.org/10.1016/j.proeng.2014.12.402

This paper presents an FEM analysis conducted for optimally designing end mill cutters through verifying the cutting tool forces and stresses for milling Titanium alloy Ti-6Al-4 V. Initially, the theoretical tool forces are calculated by considering... Read More about FEM analysis to optimally design end mill cutters for milling of Ti-6Al-4V..

Automated design and STEP-NC machining of impellers (2012)
Conference Proceeding
ARIVAZHAGAN, A., MEHTA, N.K. and JAIN, P.K. 2012. Automated design and STEP-NC matching of impellers. In Hinduja, S. and Li, L. (eds.) Proceedings of the 37th Manufacturing Automation and Systems Technology, Applications, Design, Organisation and Management, and Research (MATADOR) international conference 2012, 25-27 July 2012, Manchester, UK. London: Springer [online], article ID 2-6, pages 57-60. Available from: https://doi.org/10.1007/978-1-4471-4480-9_2

This paper presents the four stage approach followed for automated design and STEP-NC based machining of impellers. In the first stage, the design calculations are performed to construct the 'Meridional representation' of the radial impeller. Then 3D... Read More about Automated design and STEP-NC machining of impellers.

STEP-based CAD/CAPP integration for finish machining operations. (2010)
Book Chapter
ARIVAZHAGAN, A., MEHTA, N.K. and JAIN, P.K. 2010. STEP-based CAD/CAPP integration for finish machining operations. In Katalinic, B. (ed.) DAAAM international scientific book 2010. 2010 edition. Vienna, Austria: DAAAM International [online], chapter 37, pages 395-412. Available from: https://doi.org/10.2507/daaam.scibook.2010.37

This chapter presents various CAD/CAPP integration methodologies adopted in Feature Recognition Module (FRM) of a “Finish Machining – Computer Aided Process Planning system” (FM-CAPP). The FRM contains three sub modules to process the inputted STEP A... Read More about STEP-based CAD/CAPP integration for finish machining operations..

Feature recognition and tool path generation for 5 axis STEP-NC machining of free form/irregular contoured surfaces. (2010)
Conference Proceeding
ANBALAGAN, A. 2010. Feature recognition and tool path generation for 5 axis STEP-NC machining of free form/irregular contoured surfaces. In Katalinic, B. (ed.) Proceedings of 21st Danube Adria Association for Automation and Manufacturing (DAAAM) international symposium 2010: intelligent manufacturing and automation, 20-23 October 2010, Zadar, Croatia. Vienna: DAAAM International [online], article ID 618, pages 1235-1236. Available from: https://www.daaam.info/Downloads/Pdfs/proceedings/proceedings_2010/24469_Symp_2_head.pdf

This research paper presents a five step algorithm to generate tool paths for machining Free form / Irregular Contoured Surface(s) (FICS) by adopting STEP-NC (AP-238) format. In the first step, a parametrized CAD model with FICS is created or importe... Read More about Feature recognition and tool path generation for 5 axis STEP-NC machining of free form/irregular contoured surfaces..

Integration of CAD/tool path data for 5-axis STEP-NC machining of free form/irrregular controured surfaces. (2010)
Conference Proceeding
ANBALAGAN, A. 2010. Integration of CAD/tool path for 5 axis STEP-NC machining of free form/irrregular contoured surfaces. In Katalinic, B. (ed.) Proceedings of 21st Danube Adria Association for Automation and Manufacturing (DAAAM) international symposium 2010: intelligent manufacturing and automation, 20-23 October 2010, Zadar, Croatia. Vienna: DAAAM International [online], article ID 617, pages 1233-1235. Available from: https://www.daaam.info/Downloads/Pdfs/proceedings/proceedings_2010/24469_Symp_1_head.pdf

This research paper presents the work on feature recognition, tool path data generation and integration with STEP-NC (AP-238 format) for features having Free form/Irregular Contoured Surfaces(s) (FICS). Initially, the FICS features are modelled/impor... Read More about Integration of CAD/tool path data for 5-axis STEP-NC machining of free form/irrregular controured surfaces..

A STEP AP 203-214-based machinable volume identifier for identifying the finish cut machinable volumes from rough machined parts. (2008)
Journal Article
ARIVAZHAGAN, A., MEHTA, N.K. and JAIN, P.K. 2009. A STEP AP 203-214-based machinable volume identifier for identifying the finish-cut machinable volumes from rough-machined parts. International journal of advanced manufacturing technology [online], 42(9-10), pages 850-872. Available from: https://doi.org/10.1007/s00170-008-1659-2

This paper presents a STEP AP203–214-based machinable volume identifier (MVI) to identify the finish-cut machinable volume in prismatic parts by deducting the rough-machined part from the final part. The MVI provides an intermediate link between roug... Read More about A STEP AP 203-214-based machinable volume identifier for identifying the finish cut machinable volumes from rough machined parts..

Development of a feature recognition module for tapered and curved base features. (2007)
Journal Article
ARIVAZHAGAN, A., MEHTA, N.K. and JAIN, P.K. 2008. Development of a feature recognition module for tapered and curved base features. International journal of advanced manufacturing technology [online], 39(3-4), pages 319-332. Available from: https://doi.org/10.1007/s00170-007-1212-8

This paper presents a feature recognition module which uses the B-rep details extracted from the STandard for Exchange of Product (STEP) format to recognize the manufacturing features on a prismatic part. It adopts the syntactic pattern recognition t... Read More about Development of a feature recognition module for tapered and curved base features..