Skip to main content

Research Repository

Advanced Search

STEP-based CAD/CAPP integration for finish machining operations. (2010)
Book Chapter
ARIVAZHAGAN, A., MEHTA, N.K. and JAIN, P.K. 2010. STEP-based CAD/CAPP integration for finish machining operations. In Katalinic, B. (ed.) DAAAM international scientific book 2010. 2010 edition. Vienna, Austria: DAAAM International [online], chapter 37, pages 395-412. Available from: https://doi.org/10.2507/daaam.scibook.2010.37

This chapter presents various CAD/CAPP integration methodologies adopted in Feature Recognition Module (FRM) of a “Finish Machining – Computer Aided Process Planning system” (FM-CAPP). The FRM contains three sub modules to process the inputted STEP A... Read More about STEP-based CAD/CAPP integration for finish machining operations..

Integration of CAD/tool path data for 5-axis STEP-NC machining of free form/irrregular controured surfaces. (2010)
Conference Proceeding
ANBALAGAN, A. 2010. Integration of CAD/tool path for 5 axis STEP-NC machining of free form/irrregular contoured surfaces. In Katalinic, B. (ed.) Proceedings of 21st Danube Adria Association for Automation and Manufacturing (DAAAM) international symposium 2010: intelligent manufacturing and automation, 20-23 October 2010, Zadar, Croatia. Vienna: DAAAM International [online], article ID 617, pages 1233-1235. Available from: https://www.daaam.info/...0/24469_Symp_1_head.pdf

This research paper presents the work on feature recognition, tool path data generation and integration with STEP-NC (AP-238 format) for features having Free form/Irregular Contoured Surfaces(s) (FICS). Initially, the FICS features are modelled/impor... Read More about Integration of CAD/tool path data for 5-axis STEP-NC machining of free form/irrregular controured surfaces..

Feature recognition and tool path generation for 5 axis STEP-NC machining of free form/irregular contoured surfaces. (2010)
Conference Proceeding
ANBALAGAN, A. 2010. Feature recognition and tool path generation for 5 axis STEP-NC machining of free form/irregular contoured surfaces. In Katalinic, B. (ed.) Proceedings of 21st Danube Adria Association for Automation and Manufacturing (DAAAM) international symposium 2010: intelligent manufacturing and automation, 20-23 October 2010, Zadar, Croatia. Vienna: DAAAM International [online], article ID 618, pages 1235-1236. Available from: https://www.daaam.info/...0/24469_Symp_2_head.pdf

This research paper presents a five step algorithm to generate tool paths for machining Free form / Irregular Contoured Surface(s) (FICS) by adopting STEP-NC (AP-238) format. In the first step, a parametrized CAD model with FICS is created or importe... Read More about Feature recognition and tool path generation for 5 axis STEP-NC machining of free form/irregular contoured surfaces..