Skip to main content

Research Repository

Advanced Search

All Outputs (39)

Flexible low-density polyethylene–BaTiO3 nanoparticle composites for monitoring leakage current in high-tension equipment. (2021)
Journal Article
GUPTA, R., BADEL, B., GUPTA, P., BUCKNALL, D.G., FLYNN, D. and PANCHOLI, K. 2021. Flexible low-density polyethylene–BaTiO3 nanoparticle composites for monitoring leakage current in high-tension equipment. ACS applied nano materials [online], 4(3), pages 2413-2422. Available from: https://doi.org/10.1021/acsanm.0c02719

Polymer–nanoparticle composites prepared using a low-density polyethylene (LDPE) matrix with BaTiO3 nanoparticle compositions of 6, 9, 12, and 15 wt % have shown insulating behavior and are evaluated for their applicability as flexible strain sensors... Read More about Flexible low-density polyethylene–BaTiO3 nanoparticle composites for monitoring leakage current in high-tension equipment..

Flexible low-density polyethylene–BaTiO3 nanoparticle composites for monitoring leakage current in high-tension equipment. [Dataset] (2021)
Dataset
GUPTA, R., BADEL, B., GUPTA, P., BUCKNALL, D.G., FLYNN, D. and PANCHOLI, K. 2021. Flexible low-density polyethylene–BaTiO3 nanoparticle composites for monitoring leakage current in high-tension equipment. [Dataset]. ACS applied nano materials [online], 4(3), pages 2413-2422. Available from: https://pubs.acs.org/doi/suppl/10.1021/acsanm.0c02719/suppl_file/an0c02719_si_001.pdf

Prepared film sample and their testing setup is included in Section S1 of Supporting Information, TEM images of the uncoated and silica-coated BaTiO3 NPs along with the TEM images of the uncoated BaTiO3 polymer NP sample and all the polymer–NP compos... Read More about Flexible low-density polyethylene–BaTiO3 nanoparticle composites for monitoring leakage current in high-tension equipment. [Dataset].

Insulating MgO–Al2O3–LDPE nanocomposites for offshore medium-voltage DC cables. (2020)
Journal Article
GUPTA, R., SMITH, L., NJUGUNA, J., DEIGHTON, A. and PANCHOLI, K. 2020. Insulating MgO–Al2O3–LDPE nanocomposites for offshore medium-voltage DC cables. ACS applied electronic materials [online], 2(7), pages 1880-1891. Available from: https://doi.org/10.1021/acsaelm.0c00052

A polymer–metal oxide nanocomposite is a key in developing a high-temperature insulation material for power electronics and high-voltage direct current (HVDC) and medium-voltage direct current (MVDC) subsea cables having the capability of transmittin... Read More about Insulating MgO–Al2O3–LDPE nanocomposites for offshore medium-voltage DC cables..

Experimental investigation on micromachining of epoxy/graphene nano platelet nanocomposites. (2020)
Journal Article
FU, G., HUO, D., SHYHA, I., PANCHOLI, K. and ALZAHRANI, B. 2020. Experimental investigation on micromachining of epoxy/graphene nano platelet nanocomposites. International journal of advanced manufacturing technology [online], 107(7-8), pages 3169-3183. Available from: https://doi.org/10.1007/s00170-020-05190-4

This paper investigates the effect of graphene nano-platelet (GNP) content (%weight fraction) on the machinability of epoxy/GNP nanocomposites. The machinability of nanocomposites with varying loadings of GNP content was evaluated experimentally thro... Read More about Experimental investigation on micromachining of epoxy/graphene nano platelet nanocomposites..

Rapid multifunctional composite part manufacturing using controlled in-situ polymerization of PA6 nanocomposite. (2019)
Journal Article
GUPTA, R., STAKEVICIUS, R. and PANCHOLI, K. 2019. Rapid multifunctional composite part manufacturing using controlled in-situ polymerization of PA6 nanocomposite. Procedia CIRP [online], 85: proceedings of 2nd CIRP conference on composite material parts manufacturing (CIRP-CCMPM 2019), 10-11 October 2019, Sheffield, UK, pages 61-65. Available from: https://doi.org/10.1016/j.procir.2019.10.003

Currently, mass composite manufacturing is dominated by the fiber-reinforced thermosets due to the ease of its processing. However, the addition of multifunctionality to the thermoset composite requires an additional step of manufacturing. This work... Read More about Rapid multifunctional composite part manufacturing using controlled in-situ polymerization of PA6 nanocomposite..

Recent developments in graphene oxide/epoxy carbon fiber-reinforced composites. (2019)
Journal Article
KEYTE, J., PANCHOLI, K. and NJUGUNA, J. 2019. Recent developments in graphene oxide/epoxy carbon fiber-reinforced composites. Frontiers in materials [online], 6, article ID 224. Available from: https://doi.org/10.3389/fmats.2019.00224

The two-dimensional macro molecule graphene and its derivatives have widely been investigated for their application as nanofiller in carbon fibre-reinforced composites (CFRC). Research has progressed from techniques that simply mix graphene as a mixi... Read More about Recent developments in graphene oxide/epoxy carbon fiber-reinforced composites..

Neutron scattering of sandstone subjected to uniaxial compression in cryogenic conditions. [Dataset] (2019)
Dataset
FAISAL, N., LEE, T.L., KELLEHER, J., SANAEE, R. and PANCHOLI, K. 2019. Neutron scattering of sandstone subjected to uniaxial compression in cryogenic conditions. [Dataset]. Hosted on STFC ISIS neutron and muon source data journal [online]. Available from: https://doi.org/10.5286/ISIS.E.RB1920741-1

The exploitation of unconventional remote geological resources, such as those in Arctic formations, requires engineering designs that withstand the temperatures and pressures encountered. In a previous experiment (RB1810235, April 2018) comparing san... Read More about Neutron scattering of sandstone subjected to uniaxial compression in cryogenic conditions. [Dataset].

Novel method of healing the fibre reinforced thermoplastic composite: a potential model for offshore applications. (2019)
Journal Article
GUPTA, R., HUO, D., WHITE, M., JHA, V., STENNING, G.B.G. and PANCHOLI, K. 2019. Novel method of healing the fibre reinforced thermoplastic composite: a potential model for offshore applications. Composites communications [online], 16, pages 67-78. Available from: https://doi.org/10.1016/j.coco.2019.08.014

Continuous fibre reinforced thermoplastic composites are increasingly finding their use as engineering materials in many industries due to the excellent fire, smoke and toxicity performance. However, the composite component produced using automated c... Read More about Novel method of healing the fibre reinforced thermoplastic composite: a potential model for offshore applications..

Effect of oleic acid coating of iron oxide nanoparticles on properties of magnetic polyamide-6 nanocomposite. (2019)
Journal Article
GUPTA, R., PANCHOLI, K., DE SA, R., MURRAY, D., HUO, D., DROUBI, G., WHITE, M. and NJUGUNA, J. 2019. Effect of oleic acid coating of iron oxide nanoparticles on properties of magnetic polyamide-6 nanocomposite. JOM [online], 71(9), pages 3119-3128. Available from: https://doi.org/10.1007/s11837-019-03622-5

This work reports the development and testing of a magnetic polymer (Polyamide 6, PA6) nanocomposite capable of melting when exposed to an external magnetic field. Addition of high concentrations of iron oxide nanoparticles (NPs) can induce quick mel... Read More about Effect of oleic acid coating of iron oxide nanoparticles on properties of magnetic polyamide-6 nanocomposite..

Experimental investigation on micro milling of polyester/halloysite nano-clay nanocomposites. (2019)
Journal Article
FU, G., HUO, D., SHYHA, I., PANCHOLI, K. and SAHARUDIN, M.S. 2019. Experimental investigation on micro milling of polyester/halloysite nano-clay nanocomposites. Nanomaterials [online], 9(7), article number 917. Available from: https://doi.org/10.3390/nano9070917

Efficient machining of the polyester nanocomposite components requires a better understanding of machinability characteristics of such material, which has become an urgent requirement for modern industrial production. In this research, the micro-mill... Read More about Experimental investigation on micro milling of polyester/halloysite nano-clay nanocomposites..

Observation of stimulated emission from Rhodamine 6G-polymer aggregate adsorbed at foam interfaces. (2018)
Journal Article
PANCHOLI, K., ROBERTSON, P.K.J., OKPOZO, P., BEATTIE, N.S. and HUO, D. 2019. Observation of stimulated emission from Rhodamine 6G-polymer aggregate adsorbed at foam interfaces. Journal of physics: energy [online], 1(1), article ID 015007. Available from: https://doi.org/10.1088/2515-7655/aaec3d

This paper reports for the first time the observation of stimulated emissions from the gas–liquid interface between two adjacent bubbles in highly ordered foams containing Rhodamine 6 G and surfactant. Stimulated emissions centred at 595 nm were obse... Read More about Observation of stimulated emission from Rhodamine 6G-polymer aggregate adsorbed at foam interfaces..

Insulating polymer nanocomposites for high thermal conduction and fire retarding applications. (2017)
Presentation / Conference
GUPTA, R., HUO, D., PANCHOLI, M., NJUGUNA, J. and PANCHOLI, K. 2017. Insulating polymer nanocomposites for high thermal conduction and fire retarding applications. Presented at the 3rd Defence and security doctoral symposium, 14-15 November 2017, Swindon, UK [online]. Available from: https://doi.org/10.17862/cranfield.rd.5675281.v1

The possibility of combining the flexibility and light - weight of polymers with the highest insulation of ceramics, drives the field of nanocomposites for potential commercial application. The inclusion of nano-sized insulating particles in the poly... Read More about Insulating polymer nanocomposites for high thermal conduction and fire retarding applications..

Self-healing polymer nanocomposites for composite structure applications. (2017)
Presentation / Conference
GUPTA, R., JHA, V., LATTO, J., PANCHOLI, M., HUO, D. and PANCHOLI, K. 2017. Self-healing polymer nanocomposites for composite structure applications. Presented at the 3rd Defence and security doctoral symposium, 14-15 November 2017, Swindon, UK [online]. Available from: https://doi.org/10.17862/cranfield.rd.5675281.v1

Nanocomposites offer the possibility of realizing materials with bespoke properties that were un-realizable by the parent pristine materials. Since, nanoscale inclusions firstly engender small mechanical, electrical and optical defects; and secondly... Read More about Self-healing polymer nanocomposites for composite structure applications..

Integrated self-healing of the composite offshore structures. (2017)
Conference Proceeding
GUPTA, R., PANCHOLI, K., PRABHU, R., PANCHOLI, M., HUO, D., JHA, V. and LATTO, J. 2017. Integrated self-healing of the composite offshore structures. In Proceedings of OCEANS 2017, 19-22 June 2017, Aberdeen, UK. New York: IEEE [online], article number 8084828, pages 1514-1517. Available from: https://doi.org/10.1109/OCEANSE.2017.8084828

The self-repairing composite materials integrated with sensing is way forward to reduce maintenance cost and increase consumer safety. In this work, the novel self-healing carbon fibre reinforced unidirectional bulk tape of simple architecture is pre... Read More about Integrated self-healing of the composite offshore structures..

Microbubble-liposome conjugate: payload evaluation of potential theranostic vehicle. (2016)
Journal Article
MALIK, R., PANCHOLI, K. and MELZER, A. 2016. Microbubble-liposome conjugate: payload evaluation of potential theranostic vehicle. Nanobiomedicine [online], 3, pages 1-8. Available from: https://doi.org/10.1177/1849543516670806

Liposome–microbubble conjugates are considered as better targeted drug delivery vehicles compared to microbubbles alone. The microbubble in the integrated drug delivery system delivers the drug intracellularly on the target, whereas the liposome comp... Read More about Microbubble-liposome conjugate: payload evaluation of potential theranostic vehicle..

High yielding microbubble production method. (2016)
Journal Article
FIABANE, J., PRENTICE, P. and PANCHOLI, K. 2016. High yielding microbubble production method. BioMed research international [online], article ID 3572827. Available from: https://doi.org/10.1155/2016/3572827

Microfluidic approaches to microbubble production are generally disadvantaged by low yield and high susceptibility to (micro)channel blockages. This paper presents an alternative method of producing microbubbles of 2.6 m mean diameter at concentratio... Read More about High yielding microbubble production method..

A novel method of producing microbubbles for targeted drug delivery. (2016)
Thesis
FIABANE, J. 2016. A novel method of producing microbubbles for targeted drug delivery. Robert Gordon University, PhD thesis.

Microbubbles, currently employed in diagnostic ultrasound as a contrast agent, have a potential new application as vehicles for targeted drug delivery, which could revolutionise medicine by eliminating side-effects. A new device is developed which ou... Read More about A novel method of producing microbubbles for targeted drug delivery..

Surface and subsurface characterisation in micro-milling of monocrystalline silicon. (2015)
Journal Article
HUO, D., LIN, C., CHOONG, Z.J., PANCHOLI, K. and DEGENAAR, P. 2015. Surface and subsurface characterisation in micro-milling of monocrystalline silicon. International journal of advanced manufacturing technology [online], 81(5-8), pages 1319-1331. Available from: https://doi.org/10.1007/s00170-015-7308-7

This paper presents an experimental investigation on surface and subsurface characterisation of micro-machined single-crystal silicon with (100) orientation. Full immersion slot milling was conducted using solid cubic boron nitride (CBN) and diamond-... Read More about Surface and subsurface characterisation in micro-milling of monocrystalline silicon..