Skip to main content

Research Repository

Advanced Search

All Outputs (14)

Scalable metamaterial thermally sprayed catalyst coatings for nuclear reactor high temperature solid oxide steam electrolysis. (2023)
Presentation / Conference
HOSSAIN, M., FAISAL, N., PRATHURU, A., KURUSHINA, V., RAJENDRAN, V., CAI, Q., HORRI, B. and KUMAR, A. 2023. Scalable metamaterial thermally sprayed catalyst coatings for nuclear reactor high temperature solid oxide steam electrolysis. Presented at the 1st IUT (Islamic University of Technology) International conference on mechanical, material and production engineering 2023 (IUT-ICMMPE 2023), 21-22 July 2023, Gaziput, Dhaka.

The UK government in their 2021 Hydrogen Strategy recognises that the low carbon hydrogen plays a critical role in achieving transition to net zero and sets a target of 5GW of low carbon hydrogen production capacity by 2030 for use across the economy... Read More about Scalable metamaterial thermally sprayed catalyst coatings for nuclear reactor high temperature solid oxide steam electrolysis..

Monitoring corrosion under insulation utilising electrochemical testing. (2023)
Presentation / Conference
NEWLANDS, B., HORGAN, M. and MINSHULL, H. 2023. Monitoring corrosion under insulation utilising electrochemical testing. Presented at the 4th International conference on health monitoring of civil and maritime structures (HeaMES 2023), 12-13 June 2023, [virtual event].

This paper proposes a novel sensor-based instrumented monitoring system for the specific detection of corrosion at the CUI interface. Electrochemical Testing (ET), Electrochemical Impedance Spectroscopy (EIS), Scanning Electron Microscopy (SEM) and E... Read More about Monitoring corrosion under insulation utilising electrochemical testing..

Modelling, optimisation and analysis of tubular high temperature solid oxide steam electrolysis cell. (2023)
Presentation / Conference
KURUSHINA, V., SOMAN, A., RAJENDRAN, V., PRATHURU, A., HOSSAIN, M., AMINI HORRI, B., CAI, Q. and FAISAL, N. 2023. Modelling, optimisation and analysis of tubular high temperature solid oxide steam electrolysis cell. Presented at the 36th Scottish fluid mechanics meetings, 24 May 2023, Glasgow, UK.

High temperature solid oxide steam electrolysis (HTSOSE) is an efficient and ecologically-friendly method of hydrogen production through conversion of the water substance into hydrogen and oxygen, using the heat and electrical energy. The HT SOSE is... Read More about Modelling, optimisation and analysis of tubular high temperature solid oxide steam electrolysis cell..

Materials for molten salt facing parts: challenges and opportunities for nuclear thermochemical cycle electrolysis. (2023)
Presentation / Conference
FAISAL, N., RAJENDRAN, V., PRATHURU, A. and HOSSAIN, M. 2023. Materials for molten salt facing parts: challenges and opportunities for nuclear thermochemical cycle electrolysis. Presented at the 5th International conference on structural nano composites 2023 (NANOSTRUC 2023), 24-26 May 2023, Nicosia, Cyprus: [virtual event].

One of the important challenges is to develop coating materials for thermochemical containment vessels and pipes that encounters the highly corrosive and harsh environment produced by the molten salt at high temperature. The aim of this review is to... Read More about Materials for molten salt facing parts: challenges and opportunities for nuclear thermochemical cycle electrolysis..

Materials and meta-data for thermochemical electrolysis. (2023)
Presentation / Conference
RAJENDRAN, V., MUTHUKRISHNAN, R., BALOGUN, Y., KURUSHINA, V., PRATHURU, A., HOSSAIN, M. and FAISAL, N.H. 2023. Materials and meta-data for thermochemical electrolysis. Presented at the 2023 Scotland's hydrogen economy and the chemical sciences, 23 May 2023, St Andrews, UK.

One of the important challenges is to develop coating materials for thermochemical containment vessels and pipes that encounters the highly corrosive and harsh environment produced by the molten salt at high temperature. Overall assessment based on t... Read More about Materials and meta-data for thermochemical electrolysis..

Modelling, optimisation and analysis of tubular high temperature solid oxide steam electrolysis cell. (2023)
Presentation / Conference
KURUSHINA, V., SOMAN, A., RAJENDRAN, V., PRATHURU, A., HOSSAIN, M., HORRI, B.A., CAI, Q. and FAISAL, N. 2023. Modelling, optimisation and analysis of tubular high temperature solid oxide steam electrolysis cell. Presented at the 2023 All-energy and dcarbonise conference, 10-11 May 2023, Glasgow, UK.

Developing electrolyser cells with enhanced hydrogen production and their scalable manufacturing can play an important role in enabling not only eco-friendly development but also cost-effective, reliable, and sustainable opportunities. Thermomechanic... Read More about Modelling, optimisation and analysis of tubular high temperature solid oxide steam electrolysis cell..

Structural design and analysis of a high temperature solid oxide steam tubular electrolyser. (2023)
Presentation / Conference
KURUSHINA, V., SOMAN, A., RAJENDRAN, V., PRATHURU, A., HOSSAIN, M., HORRI, B., CAI, Q. and FAISAL, N. 2023. Structural design and analysis of a high temperature solid oxide steam tubular electrolyser. Presented at the 2023 All things hydrogen conference (ATH23) [online], 14 March 2023, Aberdeen, UK. Available from: https://tinyurl.com/56ut5jjb

The hydrogen production is an active area of the innovation and development in the perspective of the next decade, with the relative dominance of the alkaline, proton exchange and solid oxide (SO) technology. The gradual maturity of the latter techno... Read More about Structural design and analysis of a high temperature solid oxide steam tubular electrolyser..

Scalable metamaterial thermally sprayed catalyst coatings for nuclear reactor high temperature solid oxide steam electrolysis. (2022)
Presentation / Conference
HOSSAIN, M., FAISAL, N., PRATHURU, A., KURUSHINA, V., CAI, Q., HORRI, B. and SOMAN, A. 2022. Scalable metamaterial thermally sprayed catalyst coatings for nuclear reactor high temperature solid oxide steam electrolysis. Presented at the 4th International conference on energy and power 2022 (ICEP2022), 11-13 December 2022, Dhaka, Bangledesh: [virtual conference].

The UK government in their 2021 Hydrogen Strategy recognises that the low carbon hydrogen plays a critical role in achieving transition to net zero and sets a target of 5GW of low carbon hydrogen production capacity by 2030 for use across the economy... Read More about Scalable metamaterial thermally sprayed catalyst coatings for nuclear reactor high temperature solid oxide steam electrolysis..

An evaluation of the morphological, microstructural and mechanical behaviour of the glass fibre/HDPE thermoplastic composite pipe. (2022)
Presentation / Conference
OKOLIE, O., NJUGUNA, J. and FAISAL, N. 2022. An evaluation of the morphological, microstructural and mechanical behaviour of the glass fibre/HDPE thermoplastic composite pipe. Presented at 2022 Scottish Research Partnership in Engineering 2022, 21 November 2022, Edinburgh, UK.

Composite pipes are increasingly being used as an alternative solution to conventional metal-based pipes. This development is in response to significant corrosion failures with the metallic pipes and enables better decision making especially for the... Read More about An evaluation of the morphological, microstructural and mechanical behaviour of the glass fibre/HDPE thermoplastic composite pipe..

Evaluation of caprock integrity for underground storage of CO2 in depleted oil and gas reservoirs using machine learning approaches. (2022)
Presentation / Conference
AMINAHO, E.N., SANAEE, R. and FAISAL, N. 2022. Evaluation of caprock integrity for underground storage of CO2 in depleted oil and gas reservoirs using machine learning approaches. Presented at the Applicability of hydrocarbon subsurface workflows to CCS conference, 28-29 April 2022, London, UK.

Carbon Dioxide (CO2) geosequestration represents one of the most promising options for reducing atmospheric emissions of CO2. Caprock integrity - ascertained based on the petrophysical and geomechanical properties of caprock - is vital to ensure safe... Read More about Evaluation of caprock integrity for underground storage of CO2 in depleted oil and gas reservoirs using machine learning approaches..

Evaluation of caprock integrity for underground storage of CO2 in depleted oil and gas reservoirs using machine learning approach. (2022)
Presentation / Conference
AMINAHO, E.N., SANAEE, R. and FAISAL, N. 2022. Evaluation of caprock integrity for underground storage of CO2 in depleted oil and gas reservoirs using machine learning approach. To be presented at 9th Annual student energy congress 2022 (ASEC 2022), 7-9 March 2022, Zagreb, Croatia.

Carbon (IV) oxide (CO2) geosequestration represents one of the most promising options for reducing atmospheric emissions of CO2. Capturing carbon dioxide is proposed as one solution to global climate change caused by anthropogenic gases in the atmosp... Read More about Evaluation of caprock integrity for underground storage of CO2 in depleted oil and gas reservoirs using machine learning approach..

Multiphase flow modelling in fractured reservoirs using a novel computational fluid dynamics approach. (2021)
Presentation / Conference
HAWEZ, H., SANAEE, R. and FAISAL, N.H. 2021. Multiphase flow modelling in fractured reservoirs using a novel computational fluid dynamics approach. Presented at the 55th US rock mechanics/geomechanics American Rock Mechanics Association (ARMA) symposium, 18-25 June 2021, [virtual conference].

Numerical modelling of multiphase flow in naturally fractured reservoirs is a challenging issue for petroleum reservoir engineers. As a result of high degree heterogeneity in flow characteristics in fractured reservoirs, several mathematical, discret... Read More about Multiphase flow modelling in fractured reservoirs using a novel computational fluid dynamics approach..

Coupled reservoir geomechanics and multiphase flow in fractured porous media. (2020)
Presentation / Conference
HAWEZ, H., SANAEE, R. and FAISAL, N. 2020. Coupled reservoir geomechanics and multiphase flow in fractured porous media. Presented at the 9th ETP (Energy Technology Partnership) annual conference 2020 (ETPAC20), 2-3 November 2020, [virtual conference].

As a result of a rapid pressure reduction and lack of understanding of hydromechanical behaviour at the fracture matrix interface, a considerable amount of hydrocarbon reserves will remain in place in fractured reservoirs. Therefore, rigid numerical... Read More about Coupled reservoir geomechanics and multiphase flow in fractured porous media..

Modal acoustic emission analysis of mode-I and mode-II fracture of adhesively-bonded joints. (2018)
Presentation / Conference
CRAWFORD, A.R., DROUBI, M.G. and FAISAL, N.H. 2018. Modal acoustic emission analysis of mode-I and mode-II fracture of adhesively-bonded joints. Presented at the 33rd European Working Group on Acoustic Emission (EWGAE) European acoustic emission testing conference (EWGAE 2018), 12-14 September 2018, Senlis, France [online], pages 218-228. Available from: http://www.ewgae2018.com/wp-content/uploads/2018/09/EWGAE-Conference-Proceedings_2018-1.pdf

Acoustic emission (AE) testing has previously been demonstrated to be well suited to detecting failure in adhesively-bonded joints. In this work, the relationship between the fracture-mode of adhesively-bonded specimens and the acoustic wave-modes ex... Read More about Modal acoustic emission analysis of mode-I and mode-II fracture of adhesively-bonded joints..