Skip to main content

Research Repository

Advanced Search

All Outputs (69)

Investigation of wave propagation pattern in a multilayer planar structure. (2023)
Journal Article
RAJENDRAN, V., PRATHURU, A., FERNANDEZ, C. and FAISAL, N.H. 2023. Investigation of wave propagation pattern in a multilayer planar structure. e-Journal of nondestructive testing [online], Special Issue NDE-Nuclear-2023: proceedings of the 2nd Non-destructive examination in nuclear international conference (NDE in Nuclear 2023), 27-29 June 2023, Sheffield, UK, article number 28270. Available from: https://www.ndt.net/search/docs.php3?id=28270

Acoustic emission (AE) is used to monitor conditions of various structures across many industrial sectors, including containment vessels or storage tanks of nuclear materials. Periodic monitoring, inspection and analysis of structure conditions can h... Read More about Investigation of wave propagation pattern in a multilayer planar structure..

A study of the effect of open biomass burning aerosol on rainfall event over Malaysia by using EOF analysis. (2023)
Journal Article
CHEN, Y., CHAN, A., YENN, T.F., OOI, C.G. and LI, L. 2023. A study of the effect of open biomass burning aerosol on rainfall event over Malaysia by using EOF analysis. IOP conference series: earth and environmental science [online], 1167: proceedings of the 2022 International conference on science and technology applications in climate change (STACLIM-2022), 29-30 November 2022, [virtual event], article number 012006. Available from: https://doi.org/10.1088/1755-1315/1167/1/012006

Significant biomass burning aerosols resulted from biomass burning activities from Sumatra and Kalimantan Island transported to Malaysia every year from August to October by the southeast monsoon. These transboundary haze changes the precipitation pa... Read More about A study of the effect of open biomass burning aerosol on rainfall event over Malaysia by using EOF analysis..

Recent advances in MXene composites research, applications and opportunities. (2023)
Journal Article
SAHARUDIN, M.S., AYUB, A., HASBI, S., MUHAMMAD-SUKKI, F., SHYHA, I. and INAM, F. [2023]. Recent advances in MXene composites research, applications and opportunities. Materials today: proceedings [online], In Press. Proceedings of the 2022 Composite sciences and technology international conference (COMSAT2022), 22-23 August 2022, Johor, Malaysia. Available from: https://doi.org/10.1016/j.matpr.2023.02.435

MXene composites have emerged as a promising class of materials due to their exceptional properties and versatility in various applications. In recent years, researchers have made significant progress in the development and characterization of MXene... Read More about Recent advances in MXene composites research, applications and opportunities..

Model predictive control of connected spacecraft formation. (2022)
Journal Article
KANNAN, S., BHOWMICK, P. and ALAMDARI, S.A.S. 2022. Model predictive control of connected spacecraft formation. IFAC papers online [online], 55(22): proceedings of the 22nd IFAC (International Federation of Automatic Control) symposium on Automatic control in aerospace 2022 (ACA 2022), 21-25 November 2022, Mumbai, India, pages 322-327. Available from: https://doi.org/10.1016/j.ifacol.2023.03.054

In this contribution the authors discuss the application of Model Predictive Control (MPC) to achieve a connected network formation of spacecrafts. A set of three spacecrafts are used to achieve in-plane formation which are initially in a connected n... Read More about Model predictive control of connected spacecraft formation..

Effects of titanium oxide and graphene as nano-fillers on the thermal conductivity of biobased phase change materials as latent thermal heat storage. (2022)
Journal Article
HASBI, S., NORAZMAN, N. and SAHARUDIN, M.S. 2023. Effects of titanium oxide and graphene as nano-fillers on the thermal conductivity of biobased phase change materials as latent thermal heat storage. Materials today: proceedings [online], 75(1): proceedings of the 2022 Innovative manufacturing, mechatronics and material forum (iM3F 2022), pages 181-187. Available from: https://doi.org/10.1016/j.matpr.2022.11.426

Biobased phase change materials (BPCMs) have attracted much attention as they offer proper melting temperature, high heat capacity, non-corrosive, low cost, and are abundantly available. However, the BPCMs have a low thermal conductivity which limits... Read More about Effects of titanium oxide and graphene as nano-fillers on the thermal conductivity of biobased phase change materials as latent thermal heat storage..

Enhancing the appearance of building integrated photovoltaics (BIPV) through the application of traditional symbols: a case study. (2022)
Journal Article
AWUKU, S.A., BENNADJI, A. MUHAMMAD-SUKKI, F. and SELLAMI, N. 2022. Enhancing the appearance of building integrated photovoltaics (BIPV) through the application of traditional symbols: a case study. AIP conference proceedings: proceedings of 3rd International conference on energy and power 2021 (ICEP 2021), 18-20 November 2021, Chiang Mai, Thailand [online], 2681, article 020050. Available from: https://doi.org/10.1063/5.0114941

Over the past years, advanced renewable technologies such as Building Integrated Photovoltaics (BIPV) has transformed to become more efficient, reliable, less costly and attractive. A migration to Net-Zero Energy Buildings (NZEB) and push for Green B... Read More about Enhancing the appearance of building integrated photovoltaics (BIPV) through the application of traditional symbols: a case study..

Impact source identification on pipes using acoustic emission energy. (2022)
Journal Article
ABOLLE-OKOYEAGU, C.J., TORRALBA, J.P., YUHANG, C. and REUBEN, R.L. 2023. Impact source identification on pipes using acoustic emission energy. e-Journal of nondestructive testing [online], 28(1): 56 papers from the 35th European conference on Acoustic emission testing 2022 (EWGAE35) and the 10th International conference on acoustic emission testing 2022 (ICAE10) (EWGAE 2022), 13-16 September 2022, Ljubljana, Slovenia, pages 1-12. Available from: https://doi.org/10.58286/27611

Impact is a common source of damage in pipes and pipeline systems and detecting the location and nature of damage is vital for reliability and safety of these systems. The main difficulty in the use of AE technology for such applications is being abl... Read More about Impact source identification on pipes using acoustic emission energy..

Analyzing windstorm pattern in Malaysia based on extracted Twitter data. (2022)
Journal Article
ISA, N.A., SALLEH, S.A., CHAN, A., ZAKARIA, N.H., SUIF, Z. and HALIM, M.A. 2022. Analyzing windstorm pattern in Malaysia based on extracted Twitter data. IOP conference series: earth and environmental science [online], 1019: Proceedings of the 1st International conference on biodiversity and sustainable development 2021 (iBioSDG 2021), 23 November 2021, [virtual event], article number 012011. Available from: https://doi.org/10.1088/1755-1315/1019/1/012011

Wind-rain interactions often lead to severe windstorm events and consequently cause damages and fatal destructions. The increase in frequency of recent windstorm events overwhelmed the nation. Thus, efforts in obtaining and recording these events are... Read More about Analyzing windstorm pattern in Malaysia based on extracted Twitter data..

Effect of gap and diameter ratio on vortex-induced forces for cylinders in tandem at Re=100. (2022)
Journal Article
ANNAPEH, H.F. and KURUSHINA, V. 2022. Effect of gap and diameter ratio on vortex-induced forces for cylinders in tandem at Re=100. Journal of physics: conference series [online], 2219: proceedings of the 4th International conference on modeling, simulation and optimization technologies and applications (MSOTA2021), 17-18 December 2021, [virtual event], article number 012021. Available from: https://doi.org/10.1088/1742-6596/2219/1/012021

The article investigates fluctuations of the vortex-induced loads related to the effects of gap and diameter ratio on the mean drag and lift coefficients of the downstream cylinder, when two circular stationary cylinders of different diameters are ar... Read More about Effect of gap and diameter ratio on vortex-induced forces for cylinders in tandem at Re=100..

Performance evaluation of (AlCrN) PVD-coated cBN inserts on machining of Inconel 718. (2021)
Journal Article
JEYAPANDIARAJAN, P., XAVIOR, M.A. and ANBALAGAN, A. 2021. Performance evaluation of (AlCrN) PVD-coated cBN inserts on machining of Inconel 718. MM science journal [online], 2021(November): proceedings of the 16th International conference on high speed machining (HSM 2021), 26-27 October 2021, Damstadt, Germany, pages 5219-5227. Available from: http://doi.org./10.17973/MMSJ.2021_11_2021178

This research work focuses on the experimental investigations conducted using uncoated cBN tool and (AlCrN) PVD Coated cBN tool for turning Inconel 718. Two different sets of experiments – one with uncoated cBN and another with coated cBN inserts wer... Read More about Performance evaluation of (AlCrN) PVD-coated cBN inserts on machining of Inconel 718..

Static concentrating photovoltaic modelling using MATLAB. (2021)
Journal Article
MUHAMMAD-SUKKI, F., FAROOQ, H., ABU-BAKAR, S.H., ARDILA-REY, J.A., SELLAMI, N., KILPATRICK, C. MUHTAZARUDDIN, M.N., BANI, N.A. and ZULKIPLI, M. 2021. Static concentrating photovoltaic modelling using MATLAB. Journal of physics: conference series [online], 2053: proceedings of 1st Advanced research on renewable energy for universal sustainability international conference 2021 (ARUS 2021), 22-24 June 2021, Kuala Lumpur, Malaysia, article 012003. Available from: https://doi.org/10.1088/1742-6596/2053/1/012003

The world has recorded an increasing interest and staggering investment in renewable technology in the last two decades, specifically in solar photovoltaic (PV). Concentrating PV (CPV) is one of PV's technology advancements and is gaining popularity... Read More about Static concentrating photovoltaic modelling using MATLAB..

A study of gas transport mechanisms for CH4/CO2 using ceramic membranes. (2021)
Journal Article
OGUNLUDE, P., ABUNUMAH, O., MUHAMMAD-SUKKI, F. and GOBINA, E. 2021. A study of gas transport mechanisms for CH4/CO2 using ceramic membranes. Crystals [online], 11(10): selected papers from 8th International conference and exhibition on advanced and nanomaterials 2021 (ICANM 2021), 9-11 August 2021, [virtual conference], article 1224. Available from: https://doi.org/10.3390/cryst11101224

Greenhouse gas emissions (GHGs) and their effects have been a matter of global concern over the past decade. As the demand for energy grows in developing economies, there has been a challenge in harnessing and utilising sustainable forms of energy to... Read More about A study of gas transport mechanisms for CH4/CO2 using ceramic membranes..

CFD modelling and prototype testing of a vertical axis wind turbines in planetary cluster formation. (2021)
Journal Article
DURKACZ, J., ISLAM, S., CHAN, R., FONG, E., GILLIES, H., KARNIK, A. and MULLAN, T. 2021. CFD modelling and prototype testing of a vertical axis wind turbines in planetary cluster formation. Energy reports [online], 7(Supplement 3): 6th International conference on advances on clean energy research 2021 (ICACER 2021), 15-17 April 2021, [virtual conference], pages 119-126. Available from: https://doi.org/10.1016/j.egyr.2021.06.019

This study aims to improve the applicability of Vertical Axis Wind Turbines (VAWTs) by investigating their feasibility in a novel planetary cluster configuration by observing its effect on efficiency and overall power density. Computational Fluid Dyn... Read More about CFD modelling and prototype testing of a vertical axis wind turbines in planetary cluster formation..

A digital twin study for immediate design / redesign of impellers and blades: part 1: CAD modelling and tool path simulation. (2021)
Journal Article
ANBALAGAN, A., SHIVAKRISHNA, B. and SRIKANTH, K.S. 2021. A digital twin study for immediate design / redesign of impellers and blades: part 1: CAD modelling and tool path simulation. Materials today: proceedings [online], 46(17)): proceedings of 3rd International conference on materials, manufacturing and modelling 2021 (ICMMM 2021), 19-21 March 2021, [virtual conference], pages 8209-8217. Available from: https://doi.org/10.1016/j.matpr.2021.03.209

This paper presents a digital twining study conducted for an immediate design / redesign and manufacturing of on impellers and blades. It is by accomplished by developing (i) CAD automation methods, based on the standard modelling procedures and (ii)... Read More about A digital twin study for immediate design / redesign of impellers and blades: part 1: CAD modelling and tool path simulation..

A FEA simulation study of ball end mill for fixed 3+1 / 3+2 axis machining of Ti-6Al-4V. (2021)
Journal Article
ANBALAGAN, A., ARUMUGAM, E. and MICHAEL, A.X. 2021. A FEA simulation study of ball end mill for fixed 3+1 / 3+2 axis machining of Ti-6Al-4V. Materials today: proceedings [online], 46(17): proceedings of 3rd International conference on materials, manufacturing and modelling 2021 (ICMMM 2021), 19-21 March 2021, [virtual conference], pages 7803-7814. Available from: https://doi.org/10.1016/j.matpr.2021.02.369

This paper presents a Finite Element Analysis (FEA) simulation study conducted on ball endmill for fixed 3 + 1 and 3 + 2 axis orientations for machining Ti-6Al-4 V. This work adopts a tungsten carbide (WC) ∅18.6 mm diametrical/6fluted ball endmill to... Read More about A FEA simulation study of ball end mill for fixed 3+1 / 3+2 axis machining of Ti-6Al-4V..

Tensile properties of epoxy/1 wt% graphene nanocomposites prepared with ethanol. (2021)
Journal Article
SAHARUDIN, M.S., HASBI, S., OKOLO, C. and INAM, F. 2021. Tensile properties of epoxy/1 wt% graphene nanocomposites prepared with ethanol. IOP conference series: materials science and engineering [online], 1072: proceedings of the 2020 Joint international conference of the 2nd International conference on industrial and system engineering (IConISE) and the 7th Annual conference on industrial and system engineering (ACISE), 22-23 July 2020, Surabaya, Indonesia, article 012009. Available from: https://doi.org/10.1088/1757-899X/1072/1/012009

In this research, solution casting technique was applied to produce four types of nanocomposites. Different ethanol dosages; 0g, 1g, 3g, and 5g were used to disperse graphene in the epoxy matrix. It was observed that 1g dosage of ethanol was the most... Read More about Tensile properties of epoxy/1 wt% graphene nanocomposites prepared with ethanol..

An IoT based industry 4.0 architecture for integration of design and manufacturing systems. (2020)
Journal Article
ANBALAGAN, A. and MORENO-GARCIA, C.F. 2021. An IoT based industry 4.0 architecture for integration of design and manufacturing systems. Materials today: proceedings [online], 46(17): proceedings of 3rd International conference on materials, manufacturing and modelling 2021 (ICMMM 2021), 19-21 March 2021, [virtual conference], pages 7135-7142. Available from: https://doi.org/10.1016/j.matpr.2020.11.196

This paper proposes an Internet of Things (IoT) based 5-stage Industry 4.0 architecture to integrate the design and manufacturing systems in a Cyber Physical Environment (CPE). It considers the transfer of design and manufacturing systems data throug... Read More about An IoT based industry 4.0 architecture for integration of design and manufacturing systems..

Toolpath algorithm for free form irregular contoured walls / surfaces with internal deflecting connections. (2020)
Journal Article
ARIVAZHAGAN, A. 2020. Toolpath algorithm for free form irregular contoured walls/surfaces with internal deflecting connections. Materials today: proceedings [online], 22(4): proceedings of 2nd International materials, manufacturing and modelling conference 2019 (ICMMM 2019), 29-31 March 2019, Vellore, India, pages 3037-3047. Available from: https://doi.org/10.1016/j.matpr.2020.03.439

This paper presents a toolpath generation method to efficiently machine free form irregular contoured walls / surfaces (FIWS) containing internal deflecting connections (IDC’s). The toolpath generation method is based on a series of identifications a... Read More about Toolpath algorithm for free form irregular contoured walls / surfaces with internal deflecting connections..

Annual energy output simulation of an optical concentrator based PV system for energy security. (2020)
Journal Article
FOSTER, S., MUHAMMAD-SUKKI, F., RAMIREZ-INIGUEZ, R., FREIER, D., DECIGA-GUSI, J., ABU-BAKAR, S.H., BANI, N.A., MUNIR, A.B., ABUBAKAR MUS'UD, A. and ARDILA-REY, J.A. 2020. Annual energy output simulation of an optical concentrator based PV system for energy security. IOP conference series: materials science and engineering [online], 736(3): proceedings of the 2019 Energy security and chemical engineering congress, 17-19 July 2019, Kuala Lumpur, Malaysia, article ID 032018. Available from: https://doi.org/10.1088/1757-899X/736/3/032018

Concentrating photovoltaic (CPV) system is an application of PV devices introduced with the aim of reducing the cost of BIPV systems through the use of an optical element to concentrate or focus the solar radiation from a large area, into a smaller a... Read More about Annual energy output simulation of an optical concentrator based PV system for energy security..

Rapid multifunctional composite part manufacturing using controlled in-situ polymerization of PA6 nanocomposite. (2019)
Journal Article
GUPTA, R., STAKEVICIUS, R. and PANCHOLI, K. 2019. Rapid multifunctional composite part manufacturing using controlled in-situ polymerization of PA6 nanocomposite. Procedia CIRP [online], 85: proceedings of 2nd CIRP conference on composite material parts manufacturing (CIRP-CCMPM 2019), 10-11 October 2019, Sheffield, UK, pages 61-65. Available from: https://doi.org/10.1016/j.procir.2019.10.003

Currently, mass composite manufacturing is dominated by the fiber-reinforced thermosets due to the ease of its processing. However, the addition of multifunctionality to the thermoset composite requires an additional step of manufacturing. This work... Read More about Rapid multifunctional composite part manufacturing using controlled in-situ polymerization of PA6 nanocomposite..