Skip to main content

Research Repository

Advanced Search

All Outputs (7)

Sand failure: effect of biocide on the geomechanical properties of outcrop carbonate rock under static conditions. (2018)
Conference Proceeding
WUYEP, E., OLUYEMI, G., YATES, K. and AKISANYA, A. 2019. Sand failure: effect of biocide on the geomechanical properties of outcrop carbonate rock under static conditions. In Kallel A., Erguler, Z.A., Cui, Z.-D., Karrech, A., Karakus, M., Kulatilake, P. and Shukla, S.K. (eds.) Recent advances in geo-environmental engineering, geomechanics and geotechnics, and geohazards: proceedings of the 1st Springer conference of the Arabian Journal of Geosciences (CAJG-1), 12-15 November 2018, Hammamet, Tunisia. Advances in science, technology and innovation: IEREK interdisciplinary series for sustainable development. Cham: Springer [online], pages 183-185. Available from: https://doi.org/10.1007/978-3-030-01665-4_43

The effects of chemical interaction of a biocide with formation rocks on the rock geomechanical strength were examined. A combination of analytical tests (Scanning Electron Microscopy/Energy-Dispersive X-Ray Analysis-SEM/EDX, X-Ray Powder Diffraction... Read More about Sand failure: effect of biocide on the geomechanical properties of outcrop carbonate rock under static conditions..

Sustainable treatment of oil contaminated waste: oil-based mud (OBM) drill cuttings and soil. (2018)
Thesis
NWINEE, S.A. 2018. Sustainable treatment of oil contaminated waste: oil-based mud (OBM) drill cuttings and soil. Robert Gordon University, PhD thesis.

Environmental pollution from oilfield drilling waste poses potential hazards which can lead to ecological imbalance. The predominant pollutant from oilfield waste is petroleum hydrocarbons. Some effects of petroleum hydrocarbon contamination in soil... Read More about Sustainable treatment of oil contaminated waste: oil-based mud (OBM) drill cuttings and soil..

The crystallinity and thermal degradation behaviour of polyamide 6/oil based mud fillers (PA6/OBMFs) nanocomposites. (2018)
Journal Article
SIDDIQUE, S., KWOFFIE, L., ADDAE-AFOAKWA, K., YATES, K. and NJUGUNA, J. 2019. The crystallinity and thermal degradation behaviour of polyamide 6/oil based mud fillers (PA6/OBMFs) nanocomposites. Polymer degradation and stability [online], 159, pages 139-152. Available from: https://doi.org/10.1016/j.polymdegradstab.2018.11.004

The crystallinity and thermal degradation behaviours of Polyamide 6/Oil Based Mud Fillers (PA6/OBMFs) nanocomposites have been investigated using DSC and TGA. TGA indicates the onset decomposition temperature of D1/2 (half-decomposition) is 16ยบ C hig... Read More about The crystallinity and thermal degradation behaviour of polyamide 6/oil based mud fillers (PA6/OBMFs) nanocomposites..

Chemical and physical effects of interaction between oilfield chemicals and formation rocks and integration with sand failure prediction models. (2018)
Thesis
WUYEP, E.O. 2018. Chemical and physical effects of interaction between oilfield chemicals and formation rocks and integration with sand failure prediction models. Robert Gordon University [online], PhD thesis. Available from: https://openair.rgu.ac.uk

Sand failure may result in the production of formation sand at the same time the formation fluids are being produced. Sand failure occurs when the formation stress exceeds the strength of the formation, which is derived mainly from the natural materi... Read More about Chemical and physical effects of interaction between oilfield chemicals and formation rocks and integration with sand failure prediction models..

Characterisation of oil based mud waste to explore the possibility in transforming waste into a value added product. (2018)
Presentation / Conference
SIDDIQUE, S., YATES, K. and NJUGUNA, J. 2018. Characterisation of oil based mud waste to explore the possibility in transforming waste into a value added product. Presented at the 6th International conference on sustainable solid waste management (NAXOS 2018), 13-16 June 2018, Naxos, Greece. Athens: National Technical University of Athens [online], paper number 45. Available from: http://uest.ntua.gr/naxos2018/proceedings/pdf/45_NAXOS2018_Siddique_etal.pdf

Waste characterisation is an essential factor in designing sustainable waste management plan. However, waste composition profile is underestimated in oil and gas exploration and production (E&P) industries in the United Kingdom. A three years long in... Read More about Characterisation of oil based mud waste to explore the possibility in transforming waste into a value added product..

Mechanical, thermal, and flammability behaviour of low density polyethylene - oil based mud fillers nanocomposites. (2018)
Presentation / Conference
SIDDIQUE, S., SMITH, G.D., YATES, K. and NJUGUNA, J. 2018. Mechanical, thermal, and flammability behaviour of low density polyethylene - oil based mud fillers nanocomposites. Presented at the 4th International conference on structural nano composites (NANOSTRUC 2018), 23-24 May 2018, Berlin, Germany.

Novel low density polyethylene (LDPE)/Oil based mud fillers (OBMF) nanocomposites were manufactured by a melt compounding process. Fourier Transform Infrared (FTIR) Spectroscopy was used to characterise the structure of the nanocomposites. The result... Read More about Mechanical, thermal, and flammability behaviour of low density polyethylene - oil based mud fillers nanocomposites..

Geomechanical effects of oilfield chemicals on sand failure in reservoir rocks. (2018)
Journal Article
WUYEP, E.O., OLUYEMI, G.F., YATES, K. and AKISANYA, A.R. 2018. Geomechanical effects of oilfield chemicals on sand failure in reservoir rocks. Journal of petroleum science and engineering [online], 165, pages 347-357. Available from: https://doi.org/10.1016/j.petrol.2018.02.041

Sand failure may result in the production of formation sand at the same time the formation fluids are being produced. This work examines the effects of some commonly used oilfield chemicals, specifically, biocide, corrosion inhibitor and scale inhibi... Read More about Geomechanical effects of oilfield chemicals on sand failure in reservoir rocks..