Skip to main content

Research Repository

Advanced Search

All Outputs (8)

Developing a virtual engineering lab using ADDIE model. (2023)
Journal Article
AMISH, M. and JIHAN. S. 2023. Developing a virtual engineering lab using ADDIE model. Journal of e-learning research [online], 2(1), pages 50-69. Available from: https://doi.org/10.33422/jelr.v2i1.417

In recent years, digital competence has become essential at the workplace. There is a growing demand for engineers with both employability and digital skills. As a result of the technological advancements, the Virtual Laboratory (VLab) concept was cr... Read More about Developing a virtual engineering lab using ADDIE model..

Models of work-based learning with examples of practice in petroleum engineering: a university-employer partnership. (2023)
Conference Proceeding
AMISH, M., JIHAN, S. and WYATT, A. 2023. Models of work-based learning with examples of practice in petroleum engineering: a university-employer partnership. In Proceedings of the 4th Global conference on education and teaching (GLOBALET 2023), 21-23 April 2023, Athens, Greece. Vilnius: Mokslines Leidybos Deimantas (Diamond Scientific Publishing) [online], pages 33-49. Available from: https://doi.org/10.33422/4th.globalet.2023.04.103

Work-based learning (WBL) is a collaborative tool employed by educational institutions and industry to educate and develop their students or workforce in all three strands of learning: for, at, and through work. This paper presents petroleum engineer... Read More about Models of work-based learning with examples of practice in petroleum engineering: a university-employer partnership..

Developing collaborative online project-based learning model to enhance learning in engineering. (2023)
Conference Proceeding
AMISH, M. and JIHAN, S. 2023. Developing collaborative online project-based learning model to enhance learning in engineering. In Proceedings of the 4th Global conference on education and teaching 2023 (GlobalET 2023), 21-23 April 2023, Athens, Greece. Vilnius: Diamond scientific publishing [online], pages 59-75. Available from: https://doi.org/10.33422/4th.globalet.2023.04.105

It has been widely reported that knowledge and skills gained in formal Higher Education Institute courses are different from those required at work. Students lack soft skills, according to feedback from employers. Many universities have become proact... Read More about Developing collaborative online project-based learning model to enhance learning in engineering..

Application of pencil lead break (PLB) point source in the detection of interfacial defects in adhesive bonds. (2022)
Journal Article
PRATHURU, A., FAISAL, N., STEEL, J. and JIHAN, S. 2022. Application of pencil lead break (PLB) point source in the detection of interfacial defects in adhesive bonds. Journal of nondestructive evaluation [online], 41(4), article 65. Available from: https://doi.org/10.1007/s10921-022-00898-7

The presence of kissing bonds (zero-thickness disbond) along the interface of an adhesive bond is highly detrimental to its strength and longevity. The detection of these kind of defects has previously been attempted using several techniques such as... Read More about Application of pencil lead break (PLB) point source in the detection of interfacial defects in adhesive bonds..

Structural and residual strength analysis of metal-to-metal adhesively bonded joints. (2019)
Thesis
PRATHURU, A. 2019. Structural and residual strength analysis of metal-to-metal adhesively bonded joints. Robert Gordon University [online], PhD thesis. Available from: https://openair.rgu.ac.uk

The aim of this study is to propose a new simulation/experimental methodology to assess the residual strength of defective adhesive bonds. This incorporates defect detection in adhesive bonds and quantification of the effect of these defects on the a... Read More about Structural and residual strength analysis of metal-to-metal adhesively bonded joints..

Stress analysis at the interface of metal-to-metal adhesively bonded joints subjected to 4-point bending: finite element method. (2016)
Journal Article
PRATHURU, A.K., FAISAL, N.H., JIHAN, S., STEEL, J.A. and NJUGUNA, J. 2017. Stress analysis at the interface of metal-to-metal adhesively bonded joints subjected to 4-point bending: finite element method. Journal of adhesion [online], 93(11), pages 855-878. Available from: https://doi.org/10.1080/00218464.2016.1172309

This paper presents a study of stress states in two-dimensional models of metal-to-metal adhesively bonded joints subjected to 4-point flexural loading using the finite element (FE) method. The FE simulations were carried out on adhesive bonded joint... Read More about Stress analysis at the interface of metal-to-metal adhesively bonded joints subjected to 4-point bending: finite element method..

Tensile failure analysis of structural materials using acoustic emission. (2016)
Conference Proceeding
MOWAT, J., JIHAN, S. and DROUBI, M.G. 2016. Tensile failure analysis of structural materials using acoustic emission. In Proceedings of the 8th European workshop on structural health monitoring (EWSHM 2016), 5-8 July 2016, Bilbao, Spain. Bad Breisig: NDT.net [online], paper 140. Available from: http://www.ndt.net/events/EWSHM2016/app/content/Paper/140_Droubi.pdf

Materials' testing is an extremely important process in the modern world with new colossal structures being built in every corner of the earth, with the ever-increasing size of structures making safety of vital importance. This research therefore aim... Read More about Tensile failure analysis of structural materials using acoustic emission..

Modelling of fines migration mechanisms in high permeability sands: impact on reservoir performance. (2009)
Thesis
AL-MUFARJI, S. 2009. Modelling of fines migration mechanisms in high permeability sands: impact on reservoir performance. Robert Gordon University, MPhil thesis.

Today the oil and gas industry suffers significant production losses due to fines migrations in high permeability sandstone formations or sand packs. During drilling, production or injection, fines migration continues to cause formation impairment re... Read More about Modelling of fines migration mechanisms in high permeability sands: impact on reservoir performance..