Browse

Development of novel vehicle design modelling functions for quantifying vehicles’ shapes. (2017)
Journal Article
SENDANAYAKE, I., ASIM, T. and MISHRA, R. 2017. Development of novel vehicle design modelling functions for quantifying vehicles' shapes. International journal of research, science, technology and management: proceedings of 2017 International conference mechanical, energy and power systems (ICMEPS 2017), 20-21 January 2017, Bhopal, India [online], 7(1), pages 26-31. Available from: http://ijrstm.net/?ddownload=517

The inland goods transportation sector has become dominant by high fuel consuming heavy goods vehicles, which are more commonly known as truck-trailer units. Manufacturers have been trying to design aerodynamically efficient truck-trailer units to re... Read More about Development of novel vehicle design modelling functions for quantifying vehicles’ shapes..

Large-eddy-simulation-based analysis of complex flow structures within the volute of a vaneless centrifugal pump. (2017)
Journal Article
ASIM, T. and MISHRA, R. 2017. Large-eddy-simulation-based analysis of complex flow structures within the volute of a vaneless centrifugal pump. S?dhan? [online], 42(4), pages 505-516. Available from: https://doi.org/10.1007/s12046-017-0623-y

Centrifugal pumps are very common in many fluid handling industrial applications, such as petrochemicals, oil and gas, etc. Although the design practices for centrifugal pumps are well established, efforts are directed towards optimising such systems... Read More about Large-eddy-simulation-based analysis of complex flow structures within the volute of a vaneless centrifugal pump..

Development of an integrated connectedness model to evaluate the effectiveness of teaching and learning. (2016)
Conference Proceeding
AL-HAMAD, S., KOLLAR, L.E., ASIM, T. and MISHRA, R. 2016. Development of an integrated connectedness model to evaluate the effectiveness of teaching and learning. In Dwivedi, Y.K., Mäntymäki, M., Ravishankar, M.N., Janssen, M., Clement, M., Slade, E.L., Rana, N.P., Al-Sharhan, S. and Simintiras, A.C. (eds.) Social media: the good, the bad and the ugly: proceedings of the 15th International Federation of Information Processing (IFIP) e-Business, e-services and e-society conference (I3E 2016), 13-15 September, 2016, Swansea, UK. Lecture notes in computer science, 9844. Cham: Springer [online], pages 707-716. Available from: https://doi.org/10.1007/978-3-319-45234-0_64

Use of blended learning system in a structured manner results in achieving higher order skills in cognitive domain. However, there is a need to quantify skills improvements as the students go through lower level skills to higher level skills. To asce... Read More about Development of an integrated connectedness model to evaluate the effectiveness of teaching and learning..

Development of a design methodology for hydraulic pipelines carrying rectangular capsules. (2016)
Journal Article
ASIM, T., MISHRA, R., ABUSHAALA, S. and JAIN, A. 2016. Development of a design methodology for hydraulic pipelines carrying rectangular capsules. International journal of pressure vessels and piping [online], 146, pages 111-128. Available from: https://doi.org/10.1016/j.ijpvp.2016.07.007

The scarcity of fossil fuels is affecting the efficiency of established modes of cargo transport within the transportation industry. Efforts have been made to develop innovative modes of transport that can be adopted for economic and environmental fr... Read More about Development of a design methodology for hydraulic pipelines carrying rectangular capsules..

Development of an information quality framework for mechanical engineering modules with enhanced treatment for pedagogical content. (2016)
Journal Article
ASIM, T., MISHRA, R. and ALSEDDIQI, M. 2016. Development of an information quality framework for mechanical engineering modules with enhanced treatment for pedagogical content. International journal of handheld computing research [online], 7(3), pages 16-23. Available from: https://doi.org/10.4018/IJHCR.2016070102

The technology based learning systems have capability to comply with diverse requirements of all the stakeholders in the modern education system. In technology based modules, such as those taught in Mechanical Engineering courses, the psychomotor con... Read More about Development of an information quality framework for mechanical engineering modules with enhanced treatment for pedagogical content..

Optimal design of hydraulic capsule pipelines transporting spherical capsules. (2016)
Journal Article
ASIM, T. and MISHRA, R. 2016. Optimal design of hydraulic capsule pipelines transporting spherical capsules. Canadian journal of chemical engineering [online], 94(5), pages 966-979. Available from: https://doi.org/10.1002/cjce.22450

The scarcity of fossil fuels affects the efficiency of established modes of cargo transport within the transportation industry. Extensive research is being carried out on improving the efficiency of existing modes of cargo transport, as well as devel... Read More about Optimal design of hydraulic capsule pipelines transporting spherical capsules..

Computational fluid dynamics based optimal design of hydraulic capsule pipelines transporting cylindrical capsules. (2016)
Journal Article
ASIM, T. and MISHRA, R. 2016. Computational fluid dynamics based optimal design of hydraulic capsule pipelines transporting cylindrical capsules. Powder technology [online], 295, pages 180-201. Available from: https://doi.org/10.1016/j.powtec.2016.03.013

Rapid depletion of energy resources has immensely affected the transportation sector, where the cargo transportation prices are rising considerably each year. Efforts have been made to develop newer modes of cargo transportation worldwide that are bo... Read More about Computational fluid dynamics based optimal design of hydraulic capsule pipelines transporting cylindrical capsules..

Numerical analysis of a railway compartment fire. (2015)
Conference Proceeding
ENBAYA, A., ASIM, T., MISHRA, R. and RAO, R.B.K.N. 2015. Numerical analysis of a railway compartment fire. In Kumar, U., Ahmadi, A., Verma, A.K. and Varde, P. (eds.) Current trends in reliability, availability, maintainability and safety: an industry perspective; selected papers from 2015 joint International conference on reliability, safety and hazard (ICRESH) and Advances in reliability, maintenance and safety (ARMS) (ICRESH-ARMS 2015), 1-4 June 2015, Luleå, Sweden. Lecture notes in mechanical engineering, 11236. Cham: Springer [online], pages 471-484. Available from: https://doi.org/10.1007/978-3-319-23597-4_34

Trains are considered to be the safest on-land transportation means for both passengers and cargo. Train accidents have been mainly disastrous, especially in case of fire, where the consequences are extensive loss of life and goods. The fire would ge... Read More about Numerical analysis of a railway compartment fire..

Optimal vaneless diffuser design for a high-end centrifugal compressor. (2015)
Conference Proceeding
AHMED, N., ASIM, T., MISHRA, R., SIVAGNANASUNDARAM, S. and EYNON, P. 2015. Optimal vaneless diffuser design for a high-end centrifugal compressor. In Proceedings of 28th Condition monitoring and diagnostic engineering management international congress 2015 (COMADEM 2015), co-located with 10th regional Congress on non-destructive and structural testing (X CORENDE), 1-4 December 2015, Buenos Aires, Argentina. Birmingham: COMADEM International, pages 406-413.

Turbochargers are widely used in the automotive industry to reduce engine emissions and to increase the power. Centrifugal compressors are an integral part of turbochargers. Centrifugal compressors comprises primarily of inducer, impeller, diffuser a... Read More about Optimal vaneless diffuser design for a high-end centrifugal compressor..

Effect of solar heat flux and thermal loading on the flow distribution within the riser pipes of a closed-loop solar thermo-syphon hot water system. (2015)
Conference Proceeding
FREEGAH, B., ASIM, T. and MISHRA, R. 2015. Effect of solar heat flux and thermal loading on the flow distribution within the riser pipes of a closed-loop solar thermo-syphon hot water system. In Proceedings of 28th Condition monitoring and diagnostic engineering management international congress 2015 (COMADEM 2015), co-located with 10th regional Congress on non-destructive and structural testing (X CORENDE), 1-4 December 2015, Buenos Aires, Argentina. Birmingham: COMADEM International, pages 398-405.

Solar energy is one of the main sources of renewable energy that is abundantly available throughout the world. Solar energy can be used for useful purposes through a number of mechanical artefacts. One such artefact is known as Thermo-syphon, which t... Read More about Effect of solar heat flux and thermal loading on the flow distribution within the riser pipes of a closed-loop solar thermo-syphon hot water system..

Drive cycle optimisation for pollution reduction. (2015)
Journal Article
ALGHADHI, M., BALL, A., KOLLAR, L.E., MISHRA, R. and ASIM, T. 2015. Drive cycle optimisation for pollution reduction. International journal of environmental science and development [online], 6(10), pages 727-731. Available from: https://doi.org/10.7763/ijesd.2015.v6.688

Green house gas emissions have abraded environmental quality for human existence. Automobile exhaust is a significant contributor globally to green house gases, among other contributors. This research investigates how vehicle fuel consumption can be... Read More about Drive cycle optimisation for pollution reduction..

Fuel consumption tabulation in laboratory conditions. (2015)
Journal Article
ALGHADHI, M., BALL, A., KOLLAR, L.E., MISHRA, R. and ASIM, T. 2015. Fuel consumption tabulation in laboratory conditions. International research journal of electronics and computer engineering [online], 1(2), pages 10-14. Available from: https://doi.org/10.24178/irjece.2015.1.2.10

Environmental degradation has come about for a number of factors including the use of fossil fuels in vehicles for everyday use. This paper attempts to understand the relationship between fuel consumption and various engine performance parameters und... Read More about Fuel consumption tabulation in laboratory conditions..

Numerical investigations on the effect of blade angles of a vertical axis wind turbine on its performance output. (2015)
Journal Article
PARK, K.-S., ASIM, T. and MISHRA, R. Numerical investigations on the effect of blade angles of a vertical axis wind turbine on its performance output. International journal of condition monitoring and diagnostic engineering management (COMADEM) [online], 18(3), pages 3-10. Available from: http://www.comadem.com/journal/past-issues/

There are many social, political and environmental issues associated with the use of fossil fuels. For this reason, there are numerous investigations currently being carried out to develop newer and renewable sources of energy to alleviate energy dem... Read More about Numerical investigations on the effect of blade angles of a vertical axis wind turbine on its performance output..

Fire safety analysis of a railway compartment using computational fluid dynamics. (2015)
Journal Article
ENBAYA, A., ASIM, T., MISHRA, R. and RAO, R.B.K.N. 2015. Fire safety analysis of a railway compartment using computational fluid dynamics. International journal of COMADEM [online] 18(3), pages 37-44. Available from: http://www.comadem.com/journal/past-issues/

Trains are considered to be the safest on land transportation for both passengers and cargo. Train accidents have been disastrous especially in case of fire, where the consequences results in loss of life and goods. The fire would generate smoke and... Read More about Fire safety analysis of a railway compartment using computational fluid dynamics..

Drive cycle optimisation for pollution reduction. (2015)
Presentation / Conference
AL-GHADHI, M., BALL, A., KOLLAR, L.E., MISHRA, R. and ASIM, T. 2015. Drive cycle optimisation for pollution reduction. Presented at 2nd International conference on petroleum and petrochemical engineering 2015 (ICPPE 2015), 10-11 January 2015, Dubai, UAE.

Green house gas emissions have abraded environmental quality for human existence. Automobile exhaust is a significant contributor globally to green house gases, among other contributors. This research investigates how vehicle fuel consumption can be... Read More about Drive cycle optimisation for pollution reduction..

The effect of blade angles of the vertical axis wind turbine on the output performance. (2014)
Presentation / Conference
MOHAMED, F., PARK, K.-S., PRADHAN, S., MISHRA, R., ZALA, K., ASIM, T. and AL-OBAIDI, A. 2014. The effect of blade angles of the vertical axis wind turbine on the output performance. Presented at 27th Condition monitoring and diagnostic engineering management international congress 2014 (COMADEM 2014), 16-18 September 2014, Brisbane, Australia.

There are many social, political and environmental issues associated with the use of fossil fuels. For this reason, there are numerous investigations currently being carried out to develop newer and renewable sources of energy to alleviate energy dem... Read More about The effect of blade angles of the vertical axis wind turbine on the output performance..

Numerical studies of the velocity distribution within the volute of a centrifugal pump. (2014)
Presentation / Conference
AL-OBAIDI, A., PRADHAN, S., ASIM, T., MISHRA, R. and ZALA, K. 2014. Numerical studies of the velocity distribution within the volute of a centrifugal pump. Presented at 27th Condition monitoring and diagnostic engineering management international congress 2014 (COMADEM 2014), 16-18 September 2014, Brisbane, Australia.

Centrifugal pumps play an essential role in engineering systems since they are widely used in the process and power industries. The performance of a centrifugal pump needs to be maximised due to its importance and this depends on the flow structure w... Read More about Numerical studies of the velocity distribution within the volute of a centrifugal pump..

Effect of the shape of connecting pipes on the performance output of a closed-loop hot water solar Thermo-syphon. (2014)
Conference Proceeding
FREEGAH, B., ASIM, T., ALBARZENJI, D., PRADHAN, S. and MISHRA, R. 2014. Effect of the shape of connecting pipes on the performance output of a closed-loop hot water solar Thermo-syphon. In Kumar, U., Karim, R., Parida, A. and Tretten, P. (eds.) Proceedings of 3rd international workshop and congress on eMaintenance: eMaintenance, trends in technologies and methodologies, challenges, possibilities and applications, 17-18 June 2014, Luleå, Sweden. Luleå: Luleå University of Technology [online], pages 119-123. Available from: http://ltu.diva-portal.org/smash/record.jsf?pid=diva2%3A997766&dswid=-1615

In order to conserve the environment from pollution, which is caused by the use of the fossil fuels, numerous research works have been carried out in renewable energy area to minimize the dependency on the fossil fuels. There are several energy sourc... Read More about Effect of the shape of connecting pipes on the performance output of a closed-loop hot water solar Thermo-syphon..

Fuel consumption tabulation in laboratory conditions. (2014)
Journal Article
ALGHADHI, M., BALL, A., KOLLAR, L.E., MISHRA, R. and ASIM, T. 2014. Fuel consumption tabulation in laboratory conditions. International journal of recent development in engineering and technology [online], 2(Special issue 4): papers from 2014 International research conference on engineering, science and management (IRCESM 2014), 4-5 June 2014, Dubai, UAE, pages 29-38. Available from: https://www.ijrdet.com/files/IRCESM2014/IJRDET_IRCESM_05.pdf

This paper examines the fuel economy displayed by passenger vehicles and attempts to connect vehicular fuel consumption to such easily measurable parameters as vehicle speed, acceleration, gear and throttle position. The central contention is to unde... Read More about Fuel consumption tabulation in laboratory conditions..

Numerical analysis of atherosclerosis and aneurysm in carotid bifurcations using computational fluid dynamics. (2013)
Presentation / Conference
ASIM, T., SENDANAYAKE, I. and MISHRA, S. 2013. Numerical analysis of atherosclerosis and aneurysm in carotid bifurcations using computational fluid dynamics. Presented at 40th National conference on fluid mechanics and fluid power 2013 (NCFMFP 2013), 12-14 December 2013, Hamirpur, India.

Atherosclerosis and Aneurysm are some of the conditions in patients suffering from vascular diseases. These vascular defects can cause severe damage to cardiovascular system (CVS), if not properly diagnosed. The advent of advanced numerical and compu... Read More about Numerical analysis of atherosclerosis and aneurysm in carotid bifurcations using computational fluid dynamics..