All Outputs (12)

Defect types. (2021)
Book Chapter
FAISAL, N., CORA, Ö.N., BEKCI, M.L., ŚLIWA, R.E., STERNBERG, Y., PANT, S., DEGENHARDT, R. and PRATHURU, A. 2021. Defect types. In Sause, M.G.R. and Jasiūnienė, E. (eds.) Structural health monitoring damage detection systems for aerospace. Springer aerospace technology. Cham: Springer [online], chapter 3, pages 15-72. Available from: https://doi.org/10.1007/978-3-030-72192-3_3

This chapter provides an overview of the common types of defects found in various structural materials and joints in aircraft. Materials manufacturing methods (including large-scale production) have been established in the aircraft industry. However,... Read More about Defect types..

Data reduction strategies. (2021)
Book Chapter
BHOWMIK, B., QUQA, S., SAUSE, M.G.R., PAKRASHI, V. and DROUBI, M.G. 2021. Data reduction strategies. In Sause, M.G.R. and Jasiūnienė, E. (eds.) Structural health monitoring damage detection systems for aerospace. Springer aerospace technology. Cham: Springer [online], chapter 9, pages 243-272. Available from: https://doi.org/10.1007/978-3-030-72192-3_9

Based on the variety of methods available for gathering data for the aircraft health status, the challenge is to reduce the overall amount of data in a trackable and safe manner to ensure that the remaining data are characteristic of the current airc... Read More about Data reduction strategies..

Monitoring tasks in aerospace. (2021)
Book Chapter
PANT, S., SHARIF KHODAEI, Z. and DROUBI, M.G. 2021. Monitoring tasks in aerospace. In Sause, M.G.R. and Jasiūnienė, E. (eds.) Structural health monitoring damage detection systems for aerospace. Springer aerospace technology. Cham: Springer [online], chapter 2, pages 5-14. Available from: https://doi.org/10.1007/978-3-030-72192-3_2

Approximately up to one-fifth of the direct operating cost of a commercial civilian fixed-wing aircraft is projected to be due to inspection and maintenance alone. Managing aircraft health with minimal human intervention and technologies that can per... Read More about Monitoring tasks in aerospace..

Strain monitoring. (2021)
Book Chapter
VANLANDUIT, S., SORGENTE, M., ZADEH, A.R., GÜEMES, A. and FAISAL, N. 2021. Strain monitoring. In Sause, M.G.R. and Jasiūnienė, E. (eds.) Structural health monitoring damage detection systems for aerospace. Springer aerospace technology. Cham: Springer [online], chapter 8, pages 219-241. Available from: https://doi.org/10.1007/978-3-030-72192-3_8

This chapter provides an overview of the use of strain sensors for structural health monitoring. Compared to acceleration-based sensors, strain sensors can measure the deformation of a structure at very low frequencies (up to DC) and enable the measu... Read More about Strain monitoring..

The open air electrical-field activated sintering and forming of micro components. (2019)
Book Chapter
ZULKIPLI, M., QIN, Y., YANG, Y., SHAARI, M.F., AYUB, A. and MUHAMMAD-SUKKI, F. 2019. The open air electrical-field activated sintering and forming of micro components. In Ismail, T.N.H.B.T., Rashid, A.H.A., Roslan, M.N., Hairom, N.H.H., Noh, F.H.M., Mamat, T.N.A.R. and Adnan, S.H. (eds.) Advanced technology centre: research and innovation. Series 2. Malaysia: UHTM, pages 133-148.

As the demand for the miniature products has increased significantly, so also has the need for these products to be produced in a rapid, flexible and cost-efficient manner. The application of electroplasticity shows significant potential to produce t... Read More about The open air electrical-field activated sintering and forming of micro components..

Optimizing the mercerisation effect on the mode I fracture toughness of Bambusa Vulgaris bamboo using surface response method. (2019)
Book Chapter
HASSAN, M.Z., ROSLAN, S.A., RASID, Z.A., YUSOFF, M.Z.M., SAPUAN, S.M. and MUHAMMAD-SUKKI, F. 2019. Optimizing the mercerisation effect on the mode I fracture toughness of Bambusa Vulgaris bamboo using surface response method. In Mastura, M.T. and Sapuan, S.M. (eds.) Implementation and evaluation of green materials in technology development: emerging research and opportunities. Advances in environmental engineering and green technologies (AEEGT). Hershey, PA: IGI Global [online], chapter 6, pages 112-129. Available from: https://doi.org/10.4018/978-1-7998-1374-3.ch006

Alkaline treatment is widely being promoted to treat natural fibres and improves the fibre bundle surface for better interlocking with the polymer matrix. The aim of this study is to optimize the merceration parameter including natrium hydroxide (NaO... Read More about Optimizing the mercerisation effect on the mode I fracture toughness of Bambusa Vulgaris bamboo using surface response method..

Hydrogen energy storage (2019)
Book Chapter
ALI, D.M.M. 2019. Hydrogen energy storage. In Demirkan, M.T. and Attia, A. (eds.) Energy storage devices. London: IntechOpen [online], chapter 8. Available from: https://doi.org/10.5772/intechopen.88902

The dominating trend of variable renewable energy sources (RES) continues to underpin the early retirement of baseload power generating sources such as coal, nuclear, and natural gas steam generators; however, the need to maintain system reliability... Read More about Hydrogen energy storage.

Petroleum production: polymers in. (2018)
Book Chapter
OLUYEMI, G.F. 2019. Petroleum production: polymers in. In Mishra, M. (ed.) Encyclopedia of polymer applications. Abingdon: CRC Press [online], chapter 98, pages 2041-2060. Available from: https://doi.org/10.4324/9781351019422

Polymers are widely used in oil and gas industry for a range of petroleum production applications. Their viscoelastic and solution thickening properties have particularly made them a chemical of choice for petroleum production applications. This entr... Read More about Petroleum production: polymers in..

Design and evaluation of gas transport through a zeolite membrane on an alumina support. (2018)
Book Chapter
SHEHU, H., OKON, E., ORAKWE, I. and GOBINA, E. 2018. Design and evaluation of gas transport through a zeolite membrane on an alumina support. In Rashed, M.N. and Palanisamy, P.N. (eds.) Zeolites and their applications. London: IntechOpen [online], chapter 3. Available from: https://doi.org/10.5772/intechopen.75545

This chapter details the synthesis and applications of zeolite membranes (gas separation and zeolite membrane reactors). Gas separation is still not carried out at industrial level for zeolite membranes. Related areas, such as the possibility of inco... Read More about Design and evaluation of gas transport through a zeolite membrane on an alumina support..

Polymer nanocomposites and related legal issues: an overview. (2018)
Book Chapter
KARIM, M.E., MUNIR, A.B., MUHAMMAD-SUKKI, F. and HASANUZZAMAN, M. 2018. Polymer nanocomposites and related legal issues: an overview. In Hussain, C.M. and Mishra, A.K. (eds.) New polymer nanocomposites for environmental remediation. Amsterdam: Elsevier [online], pages 679-698. Available from: https://doi.org/10.1016/B978-0-12-811033-1.00026-3

Manipulation of engineered nanomaterials (ENMs) to develop different consumer and industrial products are the preferred choice in modern day industrial production due to their unprecedented, but diversified promises and prospects. The researchers cla... Read More about Polymer nanocomposites and related legal issues: an overview..

Fuel cells as an energy source for desalination applications. (2017)
Book Chapter
FAISAL, N.H., AHMED, R., ISLAM, S.K., HOSSAIN, M., GOOSEN, M.F.A. and KATIKANENI, S.P. 2017. Fuel cells as an energy source for desalination applications. In Mahmoudi, H., Ghaffour, N., Goosen, M.F.A. and Bundschuh, J. (eds.) Renewable energy technologies for water desalination. Boca Raton: CRC Press [online], chapter 7, pages 131-145. Available from: https://doi.org/10.1201/9781315643915-7

Nowadays, there is a renewed interest in fuel cell technology from industry and academia, electrochemistry and catalysis scientists. This interest is due to environmental legislations for CO2 and other greenhouse gases emissions (United Nations Envir... Read More about Fuel cells as an energy source for desalination applications..

STEP-based CAD/CAPP integration for finish machining operations. (2010)
Book Chapter
ARIVAZHAGAN, A., MEHTA, N.K. and JAIN, P.K. 2010. STEP-based CAD/CAPP integration for finish machining operations. In Katalinic, B. (ed.) DAAAM international scientific book 2010. 2010 edition. Vienna, Austria: DAAAM International [online], chapter 37, pages 395-412. Available from: https://doi.org/10.2507/daaam.scibook.2010.37

This chapter presents various CAD/CAPP integration methodologies adopted in Feature Recognition Module (FRM) of a “Finish Machining – Computer Aided Process Planning system” (FM-CAPP). The FRM contains three sub modules to process the inputted STEP A... Read More about STEP-based CAD/CAPP integration for finish machining operations..