Browse

Indoor characterisation of a reverse truncated pyramid concentrator. (2021)
Conference Proceeding
TAMUNO-IBUOMI, L.O., MUHAMMAD-SUKKI, F., RAMIREZ-INIGUEZ, R., ARDILA-REY, J.A., ABU-BAKAR, S.H., BANI, N.A., SEE, C.H., FAISAL, N.H. and SELLAMI, N. 2021. Indoor characterisation of a reverse truncated pyramid concentrator. In Proceedings of 48th Institute of Electrical and Electronics Engineers (IEEE) Photovoltaic specialists conference 2021 (PVSC 2021), 20-25 June 2021, [virtual conference]. Piscataway: IEEE [online], pages 2348-2350. Available from: https://doi.org/10.1109/PVSC43889.2021.9518741

The development of concentrating photovoltaic (PV) started in 1960s and over the years, a variety of concentrator designs have been explored. One of its applications is for use in building integrated photovoltaic (BIPV) with the aim of producing a ch... Read More about Indoor characterisation of a reverse truncated pyramid concentrator..

Neutron diffraction residual stress measurements in suspension HVOF sprayed Al2O3 and YSZ coatings. (2018)
Conference Proceeding
OWOSENI, T., BAI, M., HUSSAIN, T., FAISAL, N.H., LEE, T.L. and KELLEHER, J. 2019. Neutron diffraction residual stress measurements in suspension HVOF sprayed Al2O3 and YSZ coatings. In Azarmi, F., Balani, K., Eden, T., Hussain, T., Li, H., Shinoda, K. and Toma, F.-L. (eds.) Proceedings of the 2018 International thermal spray conference (ITSC 2018), 7-10 May 2018, Orlando, USA. Ohio: ASM International [online], pages 490-495. Available from: http://www.proceedings.com/47648.html

Thermally sprayed coatings have residual stresses due to the processing techniques where the particles go through thermal softening/melting, high velocity impact and rapid solidification. The nature and magnitude of residual stresses in these coating... Read More about Neutron diffraction residual stress measurements in suspension HVOF sprayed Al2O3 and YSZ coatings..

Comparison of wear performance of thermal sprayed cermet (WC-Co) coatings from suspension and feedstock powders. (2017)
Conference Proceeding
ALI, O., AHMED, R., ALAWADHI, H., SHAMEER, M., FAISAL, N., AL-ANAZI, N. and GOOSEN, M. 2017. Comparison of wear performance of thermal sprayed cermet (WC-Co) coatings from suspension and feedstock powders. In Proceedings of the 2017 International thermal spray conference and exposition (ITSC 2017), 7-9 June 2017, Düsseldorf, Germany. Düsseldorf: DVS Media, pages 681-686.

WC-Co coatings were deposited using conventional High Velocity Oxy-Fuel Jet-Kote (HVOF-JK) and Suspension HVOF (S-HVOF) methods. Microstructural and mechanical properties along with the wear resistance of coatings were investigated. Reciprocating sli... Read More about Comparison of wear performance of thermal sprayed cermet (WC-Co) coatings from suspension and feedstock powders..

Characterization of hydroxyapatite layer on AISI 316L stainless steel. (2017)
Conference Proceeding
HLINKA, J., LASEK, S., SIOSTRZONEK, R. and FAISAL, N. 2017. Characterization of hydroxyapatite layer on AISI 316L stainless steel. In Proceedings of the 26th International conference on metallurgy and materials (METAL 2017), 24-26 May 2017, Brno, Czech Republic. Ostrava: Tanger, pages 1292-1297.

Bioactive coatings can be divided into two main groups - organic and inorganic coatings. Hydroxyapatite (HA) is well known as one of inorganic part of mammal's bone structure and is highly recommended for use in implantology. This paper is mainly foc... Read More about Characterization of hydroxyapatite layer on AISI 316L stainless steel..

Acoustic emission testing of composite-to-metal and metal-to-metal adhesive bond strengths. (2016)
Conference Proceeding
DROUBI, M.G., FAISAL, N.H., STUART, A., MOWAT, J., NOBEL, C. and EL-SHAIB, M.N. 2016. Acoustic emission testing of composite-to-metal and metal-to-metal adhesive bond strengths. In Proceedings of the 32nd European conference on acoustic emission testing (EWGAE 2016), 7-9 September 2016, Prague, Czech Republic. Bad Breisig: NDT.net [online], pages 95-104. Available from: http://www.ndt.net/article/ewgae2016/papers/95_paper.pdf

Composite sandwich structures consisting of two layers with an adhesive contacting interface are of importance in a number of industrial applications such as aerospace, marine and automotive. This research therefore aims to characterise the failure b... Read More about Acoustic emission testing of composite-to-metal and metal-to-metal adhesive bond strengths..

Microstructural evaluation of suspension thermally sprayed WC-Co nanocomposite coatings. (2015)
Conference Proceeding
AHMED, R., FAISAL, N.H., ALI, O., AL-ANAZI, N.M., AL-MUTAIRI, S., MAMOUR, S., POLYCHRONIADIS, E.K. and GOOSEN, M.F.A. 2015. Microstructural evaluation of suspension thermally sprayed WC-Co nanocomposite coatings. In Polychroniadis, E.K., Oral, A.Y. and Ozer, M. (eds.) Proceedings of the 2nd International multidisciplinary microscopy and microanalysis congress 2014 (InterM), 16-19 October 2014, Oludeniz, Turkey. Springer proceedings in physics, 164. Cham: Springer [online], pages 31-38. Available from: https://doi.org/10.1007/978-3-319-16919-4_5

Microstructural and sliding wear evaluations of nanostructured coatings deposited by Suspension High Velocity Oxy-Fuel (S-HVOF) spraying were conducted in as-sprayed and HIPed (Hot Isostatically Pressed) conditions. S-HVOF coatings were nanostructure... Read More about Microstructural evaluation of suspension thermally sprayed WC-Co nanocomposite coatings..