All Outputs (77)

Model predictive control of connected spacecraft formation. (2022)
Journal Article
KANNAN, S., BHOWMICK, P. and ALAMDARI, S.A.S. 2022. Model predictive control of connected spacecraft formation. IFAC papers online [online], 55(22): proceedings of the 22nd IFAC (International Federation of Automatic Control) symposium on Automatic control in aerospace 2022 (ACA 2022), 21-25 November 2022, Mumbai, India, pages 322-327. Available from: https://doi.org/10.1016/j.ifacol.2023.03.054

In this contribution the authors discuss the application of Model Predictive Control (MPC) to achieve a connected network formation of spacecrafts. A set of three spacecrafts are used to achieve in-plane formation which are initially in a connected n... Read More about Model predictive control of connected spacecraft formation..

Assessing the contribution of open crop straw burning to ground-level ozone and associated health impacts in China and the effectiveness of straw burning bans. (2022)
Journal Article
HUANG, L., ZHU, Y., LIU, H., WANG, Y., ALLEN, D.T., OOI, M.C.G., MANOMAIPHIBOON, K., LATIF, M.T., CHAN, A. and LI, L. 2023. Assessing the contribution of open crop straw burning to ground-level ozone and associated health impacts in China and the effectiveness of straw burning bans. Environment international [online], 171, article 107710. Available from: https://doi.org/10.1016/j.envint.2022.107710

In recent years, ozone pollution in China has been shown to increase in frequency and persistence despite the concentrations of fine particulate matter (PM2.5) decreasing steadily. Open crop straw burning (OCSB) activities are extensive in China and... Read More about Assessing the contribution of open crop straw burning to ground-level ozone and associated health impacts in China and the effectiveness of straw burning bans..

Prospective of response surface methodology as an optimization tool for biomass gasification process. (2022)
Journal Article
ASAAD, S.M., INAYAT, A., ROCHA-MENESES, L., JAMIL, F., GHENAI, C, and SHANABLEH, A. 2023. Prospective of response surface methodology as an optimization tool for biomass gasification process. Energies [online], 16(1), article 40. Available from: https://doi.org/10.3390/en16010040

The worldwide population growth and the technological advancements reported in the past few years have led to an increase in the production and consumption of energy. This has increased greenhouse gas (GHG) emissions, the primary driver of climate ch... Read More about Prospective of response surface methodology as an optimization tool for biomass gasification process..

Comparative strength and stability analysis of conventional and lighter composite flexible risers in ultra-deep water subsea environment. (2022)
Journal Article
NAMMI, S.K., GUPTA, R. and PANCHOLI, K. [2022]. Comparative strength and stability analysis of conventional and lighter composite flexible risers in ultra-deep water subsea environment. Proceedings of the Institution of Mechanical Engineers, Part E: journal of process mechanical engineering [online], OnlineFirst. Available from: https://doi.org/10.1177/09544089221144394

The hybrid flexible risers have a multi-layered structure and use thermoplastic composite for the pressure and tensile armour. In contrast, a conventional flexible riser uses heavier carbon steel as armour which significantly contributes to its weigh... Read More about Comparative strength and stability analysis of conventional and lighter composite flexible risers in ultra-deep water subsea environment..

Effects of titanium oxide and graphene as nano-fillers on the thermal conductivity of biobased phase change materials as latent thermal heat storage. (2022)
Journal Article
HASBI, S., NORAZMAN, N. and SAHARUDIN, M.S. 2023. Effects of titanium oxide and graphene as nano-fillers on the thermal conductivity of biobased phase change materials as latent thermal heat storage. Materials today: proceedings [online], 75(1): proceedings of the 2022 Innovative manufacturing, mechatronics and material forum (iM3F 2022), pages 181-187. Available from: https://doi.org/10.1016/j.matpr.2022.11.426

Biobased phase change materials (BPCMs) have attracted much attention as they offer proper melting temperature, high heat capacity, non-corrosive, low cost, and are abundantly available. However, the BPCMs have a low thermal conductivity which limits... Read More about Effects of titanium oxide and graphene as nano-fillers on the thermal conductivity of biobased phase change materials as latent thermal heat storage..

Enhancing the catalytic activity of eggshell-derived CaO catalyst and its application in biodiesel production from waste chicken fat. (2022)
Journal Article
SALEEM, M., JAMIL, F., QAMAR, O.A., AKHTER, P., HUSSAIN, M., KHURRAM, M.S., AL-MUHTASEB, A.H., INAYAT, A. and SHAH, N.S. 2022. Enhancing the catalytic activity of eggshell-derived CaO catalyst and its application in biodiesel production from waste chicken fat. Catalysts [online], 12(12), article number 1627. Available from: https://doi.org/10.3390/catal12121627

The comparatively greater cost of producing biodiesel in comparison to petroleum diesel is one of the key drawbacks. Eggshells and leftover chicken fat are examples of poultry wastes that can be used to produce biodiesel at a low cost as catalysts an... Read More about Enhancing the catalytic activity of eggshell-derived CaO catalyst and its application in biodiesel production from waste chicken fat..

Graphene oxide's regenerative acidity and its effects on the hydration of type II Portland cement. (2022)
Journal Article
SHEIKH, T.M., ANWAR, M.P., MUTHOOSAMY, K., JAGANATHAN, J., CHAN, A. and MOHAMED, A.A. 2023. Graphene oxide's regenerative acidity and its effects on the hydration of type II Portland cement. Construction and building materials [online], 364, article 129933. Available from: https://doi.org/10.1016/j.conbuildmat.2022.129933

Incorporation of graphene oxide (GO) has been found to considerably improve the hydration process, strength and durability of Portland cement. However, the exact nature of its chemical interactions with the cement are unclear. In this study, GO of va... Read More about Graphene oxide's regenerative acidity and its effects on the hydration of type II Portland cement..

Enhancing the appearance of building integrated photovoltaics (BIPV) through the application of traditional symbols: a case study. (2022)
Journal Article
AWUKU, S.A., BENNADJI, A. MUHAMMAD-SUKKI, F. and SELLAMI, N. 2022. Enhancing the appearance of building integrated photovoltaics (BIPV) through the application of traditional symbols: a case study. AIP conference proceedings: proceedings of 3rd International conference on energy and power 2021 (ICEP 2021), 18-20 November 2021, Chiang Mai, Thailand [online], 2681, article 020050. Available from: https://doi.org/10.1063/5.0114941

Over the past years, advanced renewable technologies such as Building Integrated Photovoltaics (BIPV) has transformed to become more efficient, reliable, less costly and attractive. A migration to Net-Zero Energy Buildings (NZEB) and push for Green B... Read More about Enhancing the appearance of building integrated photovoltaics (BIPV) through the application of traditional symbols: a case study..

Manufacturing defects in thermoplastic composite pipes and their effect on the in-situ performance of thermoplastic composite pipes in oil and gas applications. (2022)
Journal Article
OKOLIE, O., LATTO, J., FAISAL, N., JAMIESON, H., MUKHERJI, A. and NJUGUNA, J. 2023. Manufacturing defects in thermoplastic composite pipes and their effect on the in-situ performance of thermoplastic composite pipes in oil and gas applications. Applied composite materials [online], 30(1), pages 231-306. Available from: https://doi.org/10.1007/s10443-022-10066-9

Thermoplastic composite pipes (TCP), which are a form of fibre reinforced thermoplastic pipes, have proven benefits such as being lightweight and non-corrosive. However, during manufacturing, certain defects are induced because of certain parameters,... Read More about Manufacturing defects in thermoplastic composite pipes and their effect on the in-situ performance of thermoplastic composite pipes in oil and gas applications..

Dynamic analysis of closed die electromagnetic sheet metal forming to predict deformation and failure of AA6061-T6 alloy using a fully coupled finite element model. (2022)
Journal Article
KHAN, Z., KHAN, M., YOOK, S.-J., KHAN, A., YOUNAS, M., ZAHIR, M.Z. and ASAD, M. 2022. Dynamic analysis of closed die electromagnetic sheet metal forming to predict deformation and failure of AA6061-T6 alloy using a fully coupled finite element model. Materials [online], 15(22), article 7997. Available from: https://doi.org/10.3390/ma15227997

This research presents a fully coupled 3D numerical model to analyse the dynamics of high-speed electromagnetic forming process for aluminium alloy AA6061-T6. The effect of Lorentz force distribution, velocity and kinetic energy on deformation, the b... Read More about Dynamic analysis of closed die electromagnetic sheet metal forming to predict deformation and failure of AA6061-T6 alloy using a fully coupled finite element model..

Numerical prediction of the effect of thermal plume of a standing human on the airborne aerosol flow in a room: assessment of the social distancing rule. (2022)
Journal Article
HOSSAIN, M., CHINENYE-KANU, N., FAISAL, N.H., PRATHURU, A., ASIM, T. and BANIK, S. 2023. Numerical prediction of the effect of thermal plume of a standing human on the airborne aerosol flow in a room: assessment of the social distancing rule. Aerosol science and engineering [online], 7(1), pages 96-106. Available from: https://doi.org/https://doi.org/10.1007/s41810-022-00165-2

The purpose of the study is to investigate the dispersion of droplet nuclei/aerosol which are produced during coughing and continuous talking to quantify the risk of infection due to airborne disease transmission. A three-dimensional modelling of aer... Read More about Numerical prediction of the effect of thermal plume of a standing human on the airborne aerosol flow in a room: assessment of the social distancing rule..

Use of membrane technology to enhance the integration of hydrogen into processing and manufacturing. (2022)
Journal Article
GOBINA, E., GIWA, A. and BEN-ARON, A. 2022. Use of membrane technology to enhance the integration of hydrogen into processing and manufacturing. Membrane technology [online], 22(8), article 70088-2. Available from: https://doi.org/10.12968/S0958-2118(22)70088-2

Membranes are at the heart of the green hydrogen economy and are used at every stage along the infrastructure highway – from production of the gas to its end use. This article looks at the role membranes play in electrolysers, and carbon capture and... Read More about Use of membrane technology to enhance the integration of hydrogen into processing and manufacturing..

A multi-objective decision framework for the selection of feasible and viable hybrid renewable energy systems in energy-constrain communities. (2022)
Journal Article
JOHNSON, Z.S., ABAKAR, Y.A., SHANMUGAM, S.A. and CHAN, A. 2023. A multi-objective decision framework for the selection of feasible and viable hybrid renewable energy systems in energy-constrain communities. International journal of renewable energy technology [online], 14(1), pages 92-113. Available from: https://doi.org/10.1504/IJRET.2023.127569

Choosing the appropriate system configuration that meets the multi-objectives of profit-making and environmental protection is always a critical decision for both entrepreneurs and the government. The choice is complicated primarily if several possib... Read More about A multi-objective decision framework for the selection of feasible and viable hybrid renewable energy systems in energy-constrain communities..

Effect of stator blades on the startup dynamics of a vertical axis wind turbine. (2022)
Journal Article
ASIM, T., SINGH, D., SIDDIQUI, M.S. and MCGLINCHEY, D. 2022. Effect of stator blades on the startup dynamics of a vertical axis wind turbine. Energies [online], 15(21), 8135. Available from: https://doi.org/10.3390/en15218135

Vertical Axis Wind Turbines (VAWTs) are omni-directional, low-cost, low-efficiency wind power extractors. A conventional drag-based VAWT consists of multiple thin rotor blades with a typical peak Tip Speed Ratio (λ) of less than 1. Their lower cut-in... Read More about Effect of stator blades on the startup dynamics of a vertical axis wind turbine..

Combustion characterization of hybrid methane-hydrogen gas in domestic swirl stoves. (2022)
Journal Article
LIU, X., ZHU, G., ASIM, T. and MISHRA, R. 2022. Combustion characterization of hybrid methane-hydrogen gas in domestic swirl stoves. Fuel [online], 333(Part 2), article 126413. Available from: https://doi.org/10.1016/j.fuel.2022.126413

Combustion of hybrid natural gas (methane) and hydrogen mixture in domestic swirl stoves has been characterized using hot-state experiments and numerical analysis. The detailed combustion mechanism of methane and hydrogen (GRI-Mech 3.0) has been simp... Read More about Combustion characterization of hybrid methane-hydrogen gas in domestic swirl stoves..

Application of thermal spray coatings in electrolysers for hydrogen production: advances, challenges, and opportunities. (2022)
Journal Article
FAISAL, N.H., PRATHURU, A., AHMED, R. et al. 2022. Application of thermal spray coatings in electrolysers for hydrogen production: advances, challenges, and opportunities. ChemNanoMat [online], 8(12), article number e202200384. Available from: https://doi.org/10.1002/cnma.202200384

Thermal spray coatings have the advantage of providing thick and functional coatings from a range of engineering materials. The associated coating processes provide good control of coating thickness, morphology, microstructure, pore size and porosity... Read More about Application of thermal spray coatings in electrolysers for hydrogen production: advances, challenges, and opportunities..

Numerical analysis of a horizontal pressure differential wave energy converter. (2022)
Journal Article
RENGANATHAN, M. and HOSSAIN, M. 2022. Numerical analysis of a horizontal pressure differential wave energy converter. Energies [online], 15(20), articles 7513. Available from: https://doi.org/10.3390/en15207513

CFD modeling of an innovative wave energy device has been carried out in this study. OpenFoam wave modeling solver interFoam has been employed in order to investigate the energy extraction capability of the wave energy device. The innovative concept... Read More about Numerical analysis of a horizontal pressure differential wave energy converter..

Mechanical properties and weld characteristics of friction stir welding of thermoplastics using heat-assisted tool. (2022)
Journal Article
SHAH, F., YOUNAS, M., KHAN, M., KHAN, A., KHAN, Z. and KHAN, N. 2023. Mechanical properties and weld characteristics of friction stir welding of thermoplastics using heat-assisted tool. Welding in the world [online], 67(2), pages 309-323. Available from: https://doi.org/10.1007/s40194-022-01385-3

Friction stir welding (FSW) is a welding technique in which a non-consumable rotating tool with a profiled pin is pressed on the adjoining surfaces and transverse along the welding direction to produce a weld trail. The technique was first applied to... Read More about Mechanical properties and weld characteristics of friction stir welding of thermoplastics using heat-assisted tool..

Scientific model development for machinery safety using machine reliability, integrity and availability. (2022)
Journal Article
NESAN, K.P., BUANG, A., KANIAPAN, S. and ZAINI, D. 2022. Scientific model development for machinery safety using machine reliability, integrity and availability. International journal of occupational safety and health [online], 12(4), pages 307-315. Available from: https://doi.org/10.3126/ijosh.v12i4.42147

Machines are equipment that increases productivity and efficiency in a workplace. Machine Reliability, Integrity, and Availability are the most critical factors to ensure machinery safety in a workplace. Throughout this study, a series of reviews of... Read More about Scientific model development for machinery safety using machine reliability, integrity and availability..

The importance of NOx control for peak ozone mitigation based on a sensitivity study using CMAQ‐HDDM‐3D model during a typical episode over the Yangtze River delta region, China. (2022)
Journal Article
WANG, Y., YALUK, E.A., CHEN, H., JIANG, S., HUANG, L., ZHU, A., XIAO, S., XUE, J., LU, G., BIAN, J., KASEMSAN, M., ZHANG, K., LIU, H., TONG, H., OOI, M.C.G., CHAN, A. and LI, L. 2022. The importance of NOx control for peak ozone mitigation based on a sensitivity study using CMAQ-HDDM-3D model during a typical episode over the Yangtze River delta region, China. Journal of geophysical research: atmospheres [online], 127(9), article e2022JD036555. Available from: https://doi.org/10.1029/2022jd036555

In recent years, ground-level ozone (O3) has been one of the main pollutants hindering air quality compliance in China's large city-clusters including the Yangtze River Delta (YRD) region. In this work, we utilized the process analysis (PA) and the h... Read More about The importance of NOx control for peak ozone mitigation based on a sensitivity study using CMAQ‐HDDM‐3D model during a typical episode over the Yangtze River delta region, China..