Skip to main content

Research Repository

Advanced Search

All Outputs (1238)

Surface area‐enhanced cerium and sulfur‐modified hierarchical bismuth oxide nanosheets for electrochemical carbon dioxide reduction to formate. (2024)
Journal Article
PALANTIMUTHU, N., SUBRAMANIAM, M.R., P, M.A., SHARMA, P.K., RAMALINGAM, V., PERAMAIAH, K., RAMAKRISHNAN, S., GU, G.H., YU, E.H. and YOO, D.J. 2024. Surface area-enhanced cerium and sulfur-modified hierarchical bismuth oxide nanosheets for electrochemical carbon dioxide reduction to formate. Small [online], Early View. Available from: https://doi.org/10.1002/smll.202400913

Electrochemical carbon dioxide reduction reaction (ECO2RR) is a promising approach to synthesize fuels and value-added chemical feedstocks while reducing atmospheric CO2 levels. Here, high surface area cerium and sulfur-doped hierarchical bismuth oxi... Read More about Surface area‐enhanced cerium and sulfur‐modified hierarchical bismuth oxide nanosheets for electrochemical carbon dioxide reduction to formate..

Unveiling a 72.5 GPa peak hardness in sustainable nanodiamond composite hard coatings via discharge energy control: a nanoindentation-Raman approach. (2024)
Journal Article
EGIZA, M., DIAB, M.R., ATTA, H., ABDELFATAH, M.M., EL-SHAER, A. and YOSHITAKE, T. 2024. Unveiling a 72.5 GPa peak hardness in sustainable nanodiamond composite hard coatings via discharge energy control: a nanoindentation-Raman approach. Materials letters [online], 369, article number 136684. Available from: https://doi.org/10.1016/j.matlet.2024.136684

Sustainable nanodiamond composite (NDC) films hold promise for high-performance hard coatings thanks to coaxial arc plasma deposition (CAPD). This eco-friendly technique eliminates the need for external heating, chemical reactions, or Co substrate pr... Read More about Unveiling a 72.5 GPa peak hardness in sustainable nanodiamond composite hard coatings via discharge energy control: a nanoindentation-Raman approach..

Tracking and estimation of surgical tool relative-pose and angle based on the vision system for surgical robot. (2024)
Presentation / Conference
MUTHUKRISHNAN, R., KANNAN, S., ZHAO, Y. and PRABHU, R. 2024. Tracking and estimation of surgical tool relative-pose and angle based on the vision system for sugical robot. Poster presented at the 3rd Medical device manufacturing centre annual conference 2024 (MDMC 2024), 23 May 2024, Glasgow, UK.

This research presents a Virtual Dynamic Tri crossbar and a Virtual Stable Graph (VDT VSG) which simplifies the task of tracing the needle angle and location in 2 D plane. In addition, Virtual Dynamic Line (helps to quantify the displacement between... Read More about Tracking and estimation of surgical tool relative-pose and angle based on the vision system for surgical robot..

Thermal spray coatings for molten salt facing structural parts and enabling opportunities for thermochemical cycle electrolysis. (2024)
Journal Article
FAISAL, N.H., RAJENDRAN, V., PRATHURU, A., HOSSAIN, M., MUTHUKRISHNAN, R., BALOGUN, Y., PANCHOLI, K., HUSSAIN, T., LOKACHARI, S., HORRI, B.A. and BANKHEAD, M. 2024. Thermal spray coatings for molten salt facing structural parts and enabling opportunities for thermochemical cycle electrolysis. Engineering reports [online], (accepted).

Thermochemical water splitting stands out as the most efficient techniques to produce hydrogen through electrolysis at a high temperature, relying on a series of chemical reactions within a loop. However, achieving a durable thermochemical cycle sys... Read More about Thermal spray coatings for molten salt facing structural parts and enabling opportunities for thermochemical cycle electrolysis..

Effects of CO2 geosequestration on opalinus clay. (2024)
Journal Article
ASIM, T. and HAWEZ, H.K. 2024. Effects of CO2 geosequestration on opalinus clay. Energies [online], 17(10), article number 2431. Available from: https://doi.org/10.3390/en17102431

CO2 geosequestration is an important contributor to United Nations Sustainable Development Goal 13, i.e., Climate Action, which states a global Net-Zero CO2 emissions by 2050. A potential impact of CO2 geosequestration in depleted oil and gas reservo... Read More about Effects of CO2 geosequestration on opalinus clay..

Wear-resistant and adherent nanodiamond composite thin film for durable and sustainable silicon carbide mechanical seals. (2024)
Journal Article
EGIZA, M., DIAB, M.R., ZIA, A.W., MURASAWA, K., FAISAL, N. and YOSHITAKE, T. 2024. Wear-resistant and adherent nanodiamond composite thin film for durable and sustainable silicon carbide mechanical seals. Wear [online], 550-551, article number 205394. Available from: https://doi.org/10.1016/j.wear.2024.205394

In response to environmental concerns, there is a growing demand for durable and sustainable mechanical seals, particularly in high-risk industries like chemical, petroleum, and nuclear sectors. This work proposes augmenting the durability and sustai... Read More about Wear-resistant and adherent nanodiamond composite thin film for durable and sustainable silicon carbide mechanical seals..

Formation integrity evaluation for geosequestration of CO2 in depleted petroleum reservoirs under cyclic stress conditions. (2024)
Journal Article
AMINAHO, E.N., HOSSAIN, M., FAISAL, N.H. and SANAEE, R. 2024. Formation integrity evaluation for geosequestration of CO2 in depleted petroleum reservoirs under cyclic stress conditions. Geoenergy science and engineering [online], 238, article 212892. Available from: https://doi.org/10.1016/j.geoen.2024.212892

The geological storage of carbon dioxide (CO2), also referred to as CO2 geosequestration, represents one of the most promising options for reducing greenhouse gases in the atmosphere. However, most of the time, CO2 is captured with small amounts of o... Read More about Formation integrity evaluation for geosequestration of CO2 in depleted petroleum reservoirs under cyclic stress conditions..

Investigation of tool wear and energy consumption in machining Ti6Al4V alloy with uncoated tools. (2024)
Journal Article
YOUNAS, M., KHAN, M., JAFFERY, S.H.I., KHAN, Z. and KHAN, N. 2024. Investigation of tool wear and energy consumption in machining Ti6Al4V alloy with uncoated tools. International journal of advanced manufacturing technology [online], 132(7-8), pages 3785-3799. Available from: https://doi.org/10.1007/s00170-024-13548-1

This research studies the energy consumption and wear mechanism of carbide cutting tools in dry machining of Ti6Al4V alloy. In the first phase of experiments, full factorial design experiments were employed to study the tool wear rate (R) and specifi... Read More about Investigation of tool wear and energy consumption in machining Ti6Al4V alloy with uncoated tools..

Impact of regional pressure dissipation on carbon capture and storage projects: a comprehensive review. (2024)
Journal Article
HAWEZ, H.K. and ASIM, T. 2024. Impact of regional pressure dissipation on carbon capture and storage projects: a comprehensive review. Energies [online], 17(8), article number 1889. Available from: https://doi.org/10.3390/en17081889

Carbon capture and storage (CCS) is a critical technology for mitigating greenhouse gas emissions and combating climate change. CCS involves capturing CO2 emissions from industrial processes and power plants and injecting them deep underground for lo... Read More about Impact of regional pressure dissipation on carbon capture and storage projects: a comprehensive review..

Numerical investigations on the transient aerodynamic performance characterization of a multibladed vertical axis wind turbine. (2024)
Journal Article
CHRISTIE, J., LINES, T., SIMPSON, D., ASIM, T., SIDDIQUI, M.S. and ISLAM, S.Z. 2024. Numerical investigations on the transient aerodynamic performance characterization of a multibladed vertical axis wind turbine. Energies [online], 17(8), article number 1900. Available from: https://doi.org/10.3390/en17081900

The use of vertical axis wind turbines (VAWTs) in urban environments is on the rise due to their relatively smaller size, simpler design, lower manufacturing and maintenance costs, and above all, due to their omnidirectionality. The multibladed drag-... Read More about Numerical investigations on the transient aerodynamic performance characterization of a multibladed vertical axis wind turbine..

Design and fabrication of a simple device for folding towel. (2024)
Journal Article
HANIFFAH, N.A., KAMAL, M.S.M. and HASBI, S. 2024. Design and fabrication of a simple device for folding towel. Journal of advanced research in applied sciences and engineering technology [online], 44(2), pages 221-233. Available from: https://doi.org/10.37934/araset.44.2.221233

Electronic technology makes work more manageable, and various electronic gadgets have been invented to assist humans. One of the most time-consuming activities is household chores, such as laundry. Daily laundry tasks are easier to manage with the he... Read More about Design and fabrication of a simple device for folding towel..

A dynamic controller synthesis methodology for negative imaginary systems using the internal model control principle. (2024)
Journal Article
BHOWMICK, P., KURAWA, S., KANNAN, S. and LANZON, A. 2024. A dynamic controller synthesis methodology for negative imaginary systems using the internal model control principle. Automatica [online], 164, article number 111621. Available from: https://doi.org/10.1016/j.automatica.2024.111621

This paper proposes a new controller design methodology for stable and minimum-phase Negative Imaginary (NI) systems relying on the classical Internal Model Control (IMC) principle. The closed-loop stability of the proposed scheme depends only on the... Read More about A dynamic controller synthesis methodology for negative imaginary systems using the internal model control principle..

Promoting nitrogen photofixation for the synthesis of ammonia using oxygen-vacant Fe2O3/ZrO2 visible light photocatalyst with straddling heterojunction and enhanced charge transfer. (2024)
Journal Article
LAZULI, A.R.S.C., RAMALINGAM, V. and NEPPOLIAN, B. 2024. Promoting nitrogen photofixation for the synthesis of ammonia using oxygen-vacant Fe2O3/ZrO2 visible light photocatalyst with straddling heterojunction and enhanced charge transfer. Journal of cleaner production [online], 451, article number 142095. Available from: https://doi.org/10.1016/j.jclepro.2024.142095

Photocatalytic nitrogen (N2) fixation is a promising and environmentally friendly alternative approach to the energy-intensive Haber-Bosch process to produce green ammonia (NH3) with zero carbon emissions. However, the unique setbacks rest on develop... Read More about Promoting nitrogen photofixation for the synthesis of ammonia using oxygen-vacant Fe2O3/ZrO2 visible light photocatalyst with straddling heterojunction and enhanced charge transfer..

Advancing early leukemia diagnostics: a comprehensive study incorporating image processing and transfer learning. (2024)
Journal Article
HAQUE, R., AL SAKIB, A., HOSSAIN, M.F., ISLAM, F., AZIZ, F.I., AHMED, M.R., KANNAN, S., ROHAN, A. and HASAN, M.J. 2024. Advancing early leukemia diagnostics: a comprehensive study incorporating image processing and transfer learning. BioMedInformatics [online], 4(2), pages 966-991. Available from: https://doi.org/10.3390/biomedinformatics4020054

Disease recognition has been revolutionized by autonomous systems in the rapidly developing field of medical technology. A crucial aspect of diagnosis involves the visual assessment and enumeration of white blood cells in microscopic peripheral blood... Read More about Advancing early leukemia diagnostics: a comprehensive study incorporating image processing and transfer learning..

Artificial lift selection methods in conventional and unconventional wells: a summary and review from old techniques to machine learning applications. (2024)
Journal Article
MAHDI, M.A.A., AMISH, M. and OLUYEMI, G. 2024. Artificial lift selection methods in conventional and unconventional wells: a summary and review from old techniques to machine learning applications. International journal of innovative science and research technology [online], 9(3), pages 2342-2356. Available from: https://doi.org/10.38124/ijisrt/IJISRT24MAR2108

Artificial lift (AL) selection is an important process in enhancing oil and gas production from reservoirs. This article explores the old and current states of AL selection in conventional and unconventional wells, identifying the challenges faced in... Read More about Artificial lift selection methods in conventional and unconventional wells: a summary and review from old techniques to machine learning applications..

Novel organometallic catalyst for efficient valorization of lipids extracted from Prunus domestica kernel shell in sustainable fuel production. (2024)
Journal Article
JAMIL, F., AL-MUHTASEB, A.H., OSMAN, A.I., AL-HAJ, L., TAY ZAR MYINT, M., INAYAT, A., HUSSAIN, M. and SHANABLEH, A. 2024. Novel organometallic catalyst for efficient valorization of lipids extracted from Prunus domestica kernel shell in sustainable fuel production. Energy conversion and management: X [online], 22, article number 100577. Available from: https://doi.org/10.1016/j.ecmx.2024.100577

This study focuses on converting Plum Kernel Shell (PKS) waste biomass into biodiesel using a novel synthesized heterogeneous catalyst, contributing to the pursuit of renewable fuel from sustainable resources. Plum Kernel Shell (PKS) is waste biomass... Read More about Novel organometallic catalyst for efficient valorization of lipids extracted from Prunus domestica kernel shell in sustainable fuel production..

Effect of slug characteristics on the nonlinear dynamic response of a long flexible fluid-conveying cylinder. (2024)
Journal Article
MEENAKUMARI, H.N.R., ZANGANEH, H. and HOSSAIN, M. 2024. Effect of slug characteristics on the nonlinear dynamic response of a long flexible fluid-conveying cylinder. Applied ocean research [online], 147, article number 103978. Available from: https://doi.org/10.1016/j.apor.2024.103978

Hydrocarbon flows in a marine riser may appear in multiple phases with varying flow patterns, among which, slug flows are known to exhibit complex flow characteristics due to fluctuations in multiphase mass, velocities, and pressure changes. Bulk of... Read More about Effect of slug characteristics on the nonlinear dynamic response of a long flexible fluid-conveying cylinder..

Sustainable super-hard and thick nanodiamond composite film deposited on cemented carbide substrates with an interfacial Al-interlayer. (2024)
Journal Article
EGIZA, M., DIAB, M.R., ALI, A.M., MURASAWA, K. and YOSHITAKE, T. 2024. Sustainable super-hard and thick nanodiamond composite film deposited on cemented carbide substrates with an interfacial Al-interlayer. Materials letters [online], 364, article number 136369. Available from: https://doi.org/10.1016/j.matlet.2024.136369

Super-hard nanodiamond composite (NDC) films, synthesized via cathodic arc plasma deposition on unheated WC−Co substrates, offer an eco-friendly solution for cutting tools. A 100 nm-thick Al-interlayer mitigates Co catalytic effects, improving adhesi... Read More about Sustainable super-hard and thick nanodiamond composite film deposited on cemented carbide substrates with an interfacial Al-interlayer..

Hybrid renewable-hydrogen energy systems and their role in the energy transition. (2024)
Presentation / Conference
ALI, D. and ATTEYA, A.I. 2024. Hybrid renewable-hydrogen energy systems and their role in the energy transition. Presented at the 2024 Hydrogen accelerator meeting, 22 March 2024, Edinburgh, UK.

Global energy-related CO2 emissions grew by 1.1% in 2023, increasing 410 Mt to reach a new record of 37.4 Gt. Emissions from coal accounted for more than 65% of the increase in 2023. The global shortfall in hydropower generation due to droughts drove... Read More about Hybrid renewable-hydrogen energy systems and their role in the energy transition..

Effect of slip and thermal gradient on micropolar nano suspension flow across a moving hydrogen fuel-cell membrane. (2024)
Journal Article
SACHHIN, S.M., MAHABALESHWAR, U.S. and CHAN. A. 2024. Effect of slip and thermal gradient on micropolar nano suspension flow across a moving hydrogen fuel-cell membrane. International journal of hydrogen energy [online], 63, pages 59-81. Available from: https://doi.org/10.1016/j.ijhydene.2024.02.332

The present article examines the micropolar fluid flow with nanofluid suspension across porous stretching/shrinking surfaces with added heat transfer through heat source/sink and radiation. The situation arises in the electrolytic fluid flow across f... Read More about Effect of slip and thermal gradient on micropolar nano suspension flow across a moving hydrogen fuel-cell membrane..