All Outputs (1201)

Development of predictive optimization model for autonomous rotary drilling system using machine learning approach. (2023)
Journal Article
AMADI, K., IYALLA, I., PRABHU, R., ALSABA, M. and WALY, M. 2023. Development of predictive optimization model for autonomous rotary drilling system using machine learning approach. Journal of petroleum exploration and production technology [online], 13(10), pages 2049-2062. Available from: https://doi.org/10.1007/s13202-023-01656-9

The growing global energy demand and strict environmental policies motivate the use of technology and performance improvement techniques in drilling operations. In the traditional drilling method, the effort and time required to optimize drilling dep... Read More about Development of predictive optimization model for autonomous rotary drilling system using machine learning approach..

Numerical modeling of varying hemodynamic features with changing internal carotid artery bifurcation angles and degrees of stenosis. (2023)
Journal Article
AL BISHTAWI, B., SOO, Y.H., CHAN, A.T.Y. and SCRIBANO, G. 2023. Numerical modeling of varying hemodynamic features with changing internal carotid artery bifurcation angles and degrees of stenosis. European journal of mechanics - B/Fluids [online], 101, pages 176-194. Available from: https://doi.org/10.1016/j.euromechflu.2023.05.009

Atherosclerosis is a disease clinically categorized as a silent killer as its symptoms only become pronounced after the buildup has extensively progressed. Therefore, early detection, prediction and treatment become of great priority. The focus of th... Read More about Numerical modeling of varying hemodynamic features with changing internal carotid artery bifurcation angles and degrees of stenosis..

Monitoring corrosion under insulation utilising electrochemical testing. (2023)
Presentation / Conference
NEWLANDS, B., HORGAN, M. and MINSHULL, H. 2023. Monitoring corrosion under insulation utilising electrochemical testing. Presented at the 4th International conference on health monitoring of civil and maritime structures (HeaMES 2023), 12-13 June 2023, [virtual event].

This paper proposes a novel sensor-based instrumented monitoring system for the specific detection of corrosion at the CUI interface. Electrochemical Testing (ET), Electrochemical Impedance Spectroscopy (EIS), Scanning Electron Microscopy (SEM) and E... Read More about Monitoring corrosion under insulation utilising electrochemical testing..

Investigating the potential of renewable-hydrogen energy storage systems (RHES) in enabling Scotland’s farming communities net-zero transition and sizing the proposed RHES system. (2023)
Journal Article
AL-ALI, H., ALI, D. and ATTEYA, A.I. 2023. Investigating the potential of renewable-hydrogen energy storage systems (RHES) in enabling Scotland’s farming communities net-zero transition and sizing the proposed RHES system. Green energy and environmental technology [online], 2, pages 1-32. Available from: https://doi.org/10.5772/geet.16

Renewable-hydrogen (H2) is a key component in Scotland's decarbonisation plans and its implementation in farming communities can support achieving net-zero goals. HydroGlen, a demonstrative renewable-powered farming community at Glensaugh, is used as... Read More about Investigating the potential of renewable-hydrogen energy storage systems (RHES) in enabling Scotland’s farming communities net-zero transition and sizing the proposed RHES system..

Investigation on mechanical and thermal properties of 3D-printed polyamide 6, graphene oxide and glass-fibre-reinforced composites under dry, wet and high temperature conditions. (2023)
Journal Article
ICHAKPA, M., GOODYEAR, M., DUTHIE, J., DUTHIE, M., WISELY, R., MACPHERSON, A., KEYTE, J., PANCHOLI, K. and NJUGUNA, J. 2023. Investigation on mechanical and thermal properties of 3d-printed polyamide 6, graphene oxide and glass-fibre-reinforced composites under dry, wet and high temperature conditions. Journal of composites science [online], 7(6), article 227. Available from: https://doi.org/10.3390/jcs7060227

This study is focused on 3D printing of polyamide 6 (PA6), PA6/graphene oxide (PA6/GO) and PA6/glass-fibre-reinforced (PA6/GF) composites. The effect of graphene oxide and glass-fibre reinforcement on 3D-printed PA6 is explored for improvement of the... Read More about Investigation on mechanical and thermal properties of 3D-printed polyamide 6, graphene oxide and glass-fibre-reinforced composites under dry, wet and high temperature conditions..

Investigation of wave propagation pattern in a multilayer planar structure. (2023)
Journal Article
RAJENDRAN, V., PRATHURU, A., FERNANDEZ, C. and FAISAL, N.H. 2023. Investigation of wave propagation pattern in a multilayer planar structure. e-Journal of nondestructive testing [online], Special Issue NDE-Nuclear-2023: proceedings of the 2nd Non-destructive examination in nuclear international conference (NDE in Nuclear 2023), 27-29 June 2023, Sheffield, UK, article number 28270. Available from: https://www.ndt.net/search/docs.php3?id=28270

Acoustic emission (AE) is used to monitor conditions of various structures across many industrial sectors, including containment vessels or storage tanks of nuclear materials. Periodic monitoring, inspection and analysis of structure conditions can h... Read More about Investigation of wave propagation pattern in a multilayer planar structure..

A model-based tracking control scheme for nonlinear industrial processes involving joint unscented Kalman filter. (2023)
Journal Article
BHADRA, S., PANDA, A., BHOWMICK, P. and KANNAN, S. 2023. A model-based tracking control scheme for nonlinear industrial processes involving joint unscented Kalman filter. Journal of control and decision [online], Latest Articles. Available from: https://doi.org/10.1080/23307706.2023.2202183

This paper proposes a model-based reference tracking scheme for stable, MIMO, nonlinear processes. A Joint Unscented Kalman Filtering technique is exploited here to develop a stochastic model of the physical process via simultaneous estimation of the... Read More about A model-based tracking control scheme for nonlinear industrial processes involving joint unscented Kalman filter..

Tracking and estimation of surgical tool pose based on the vision system for surgical robot. (2023)
Presentation / Conference
MUTHUKRISHNAN, R., KANNAN, S., ZHAO, Y. and PRABHU, R. 2023. Tracking and estimation of surgical tool pose based on the vision system for surgical robot. Presented at the 2nd MDMC (Medical device manufacturing centre) annual conference 2023, 31 May 2023, Dundee, UK.

The aim of this research is to customise a surgical robot. This research presents a Virtual Dynamic Tri-crossbar and a Virtual Stable Graph (VDT-VSG) which simplifies the task of tracing the needle angle and location.

A rough Dombi Bonferroni based approach for public charging station type selection. (2023)
Journal Article
DEVECI, M., ERDOGAN, N., PAMUCAR, D., KUCUKSARI, S. and CALI, U. 2023. A rough Dombi Bonferroni based approach for public charging station type selection. Applied energy [online], 345, article 121258. Available from: https://doi.org/10.1016/j.apenergy.2023.121258

As the transition to electric mobility accelerates, charging infrastructure is rapidly expanding. Publicly accessible chargers, also known as electric vehicle supply equipment (EVSE), are critical not only for further promoting the transition but als... Read More about A rough Dombi Bonferroni based approach for public charging station type selection..

Materials for molten salt facing parts: challenges and opportunities for nuclear thermochemical cycle electrolysis. (2023)
Presentation / Conference
FAISAL, N., RAJENDRAN, V., PRATHURU, A. and HOSSAIN, M. 2023. Materials for molten salt facing parts: challenges and opportunities for nuclear thermochemical cycle electrolysis. Presented at the 5th International conference on structural nano composites 2023 (NANOSTRUC 2023), 24-26 May 2023, Nicosia, Cyprus: [virtual event].

One of the important challenges is to develop coating materials for thermochemical containment vessels and pipes that encounters the highly corrosive and harsh environment produced by the molten salt at high temperature. The aim of this review is to... Read More about Materials for molten salt facing parts: challenges and opportunities for nuclear thermochemical cycle electrolysis..

Bio-based sustainable polymers and materials: from processing to biodegradation. (2023)
Journal Article
OKOLIE, O., KUMAR, A., EDWARDS, C., LAWTON, L.A., OKE, A., MCDONALD, S., THAKUR, V.K. and NJUGUNA, J. 2023. Bio-based sustainable polymers and materials: from processing to biodegradation. Journal of composites science [online], 7(6), article 213. Available from: https://doi.org/10.3390/jcs7060213

In the life cycle of a material, there will be either chemical or physical change due to varying environmental factors such as biological activity, light, heat, moisture, and chemical conditions. This process leads to polymer property change as perta... Read More about Bio-based sustainable polymers and materials: from processing to biodegradation..

Modelling, optimisation and analysis of tubular high temperature solid oxide steam electrolysis cell. (2023)
Presentation / Conference
KURUSHINA, V., SOMAN, A., RAJENDRAN, V., PRATHURU, A., HOSSAIN, M., AMINI HORRI, B., CAI, Q. and FAISAL, N. 2023. Modelling, optimisation and analysis of tubular high temperature solid oxide steam electrolysis cell. Presented at the 36th Scottish fluid mechanics meetings, 24 May 2023, Glasgow, UK.

High temperature solid oxide steam electrolysis (HTSOSE) is an efficient and ecologically-friendly method of hydrogen production through conversion of the water substance into hydrogen and oxygen, using the heat and electrical energy. The HT SOSE is... Read More about Modelling, optimisation and analysis of tubular high temperature solid oxide steam electrolysis cell..

Effect of ice floe on the strength, stability and fatigue of hybrid flexible risers in Artic sea. [Dataset] (2023)
Dataset
KOROTYGIN, D., NAMMI, S.K. and PANCHOLI, K. 2023. Effect of ice floe on the strength, stability and fatigue of hybrid flexible risers in Arctic sea. [Dataset]. Journal of composites science [online], 7(6), article 212. Available from: https://www.mdpi.com/article/10.3390/jcs7060212/s1

The harsh and extreme conditions in the Arctic region pose new challenges for the technologies and standards established for traditional open water fields, as they may not be suitable for developments in ice-covered waters. Due to the unique challeng... Read More about Effect of ice floe on the strength, stability and fatigue of hybrid flexible risers in Artic sea. [Dataset].

Materials and meta-data for thermochemical electrolysis. (2023)
Presentation / Conference
RAJENDRAN, V., MUTHUKRISHNAN, R., BALOGUN, Y., KURUSHINA, V., PRATHURU, A., HOSSAIN, M. and FAISAL, N.H. 2023. Materials and meta-data for thermochemical electrolysis. Presented at the 2023 Scotland's hydrogen economy and the chemical sciences, 23 May 2023, St Andrews, UK.

One of the important challenges is to develop coating materials for thermochemical containment vessels and pipes that encounters the highly corrosive and harsh environment produced by the molten salt at high temperature. Overall assessment based on t... Read More about Materials and meta-data for thermochemical electrolysis..

The effect of ice floe on the strength, stability, and fatigue of hybrid flexible risers in the Arctic sea. (2023)
Journal Article
KOROTYGIN, D., NAMMI, S.K. and PANCHOLI, K. 2023. The effect of ice floe on the strength, stability, and fatigue of hybrid flexible risers in the Artic sea. Journal of composites science [online], 7(6), article 212. Available from: https://doi.org/10.3390/jcs7060212

Flexible risers have proven to be a popular choice for deepwater exploration due to their ability to withstand functional and environmental stress while maintaining system integrity. In the challenging arctic conditions, lightweight hybrid composite... Read More about The effect of ice floe on the strength, stability, and fatigue of hybrid flexible risers in the Arctic sea..

A study of the effect of open biomass burning aerosol on rainfall event over Malaysia by using EOF analysis. (2023)
Journal Article
CHEN, Y., CHAN, A., YENN, T.F., OOI, C.G. and LI, L. 2023. A study of the effect of open biomass burning aerosol on rainfall event over Malaysia by using EOF analysis. IOP conference series: earth and environmental science [online], 1167: proceedings of the 2022 International conference on science and technology applications in climate change (STACLIM-2022), 29-30 November 2022, [virtual event], article number 012006. Available from: https://doi.org/10.1088/1755-1315/1167/1/012006

Significant biomass burning aerosols resulted from biomass burning activities from Sumatra and Kalimantan Island transported to Malaysia every year from August to October by the southeast monsoon. These transboundary haze changes the precipitation pa... Read More about A study of the effect of open biomass burning aerosol on rainfall event over Malaysia by using EOF analysis..

Flow-induced forces for a group of one large and several small structures in the sheared turbulent flow. (2023)
Journal Article
ANNAPEH, H.F. and KURUSHINA, V. 2023. Flow-induced forces for a group of one large and several small structures in the sheared turbulent flow. Fluids [online], 8(5), article number 158. Available from: https://doi.org/10.3390/fluids8050158

Evaluating the hydrodynamic force fluctuations acting on each structure in a group of subsea objects of different cross-section shapes, sizes and relative positions represents a challenge due to the sensitivity of the vortex shedding process, especia... Read More about Flow-induced forces for a group of one large and several small structures in the sheared turbulent flow..

Modelling, optimisation and analysis of tubular high temperature solid oxide steam electrolysis cell. (2023)
Presentation / Conference
KURUSHINA, V., SOMAN, A., RAJENDRAN, V., PRATHURU, A., HOSSAIN, M., HORRI, B.A., CAI, Q. and FAISAL, N. 2023. Modelling, optimisation and analysis of tubular high temperature solid oxide steam electrolysis cell. Presented at the 2023 All-energy and dcarbonise conference, 10-11 May 2023, Glasgow, UK.

Developing electrolyser cells with enhanced hydrogen production and their scalable manufacturing can play an important role in enabling not only eco-friendly development but also cost-effective, reliable, and sustainable opportunities. Thermomechanic... Read More about Modelling, optimisation and analysis of tubular high temperature solid oxide steam electrolysis cell..

Modelling real-world renewable hydrogen energy systems for enabling Scotland zero-carbon ambition. (2023)
Presentation / Conference
ATTEYA, A.I. and ALI, D. 2023. Modelling real-world renewable hydrogen energy systems for enabling Scotland zero-carbon ambition. Presented at the 2023 All-energy and dcarbonise conference, 10-11 May 2023, Glasgow, UK.

Hydrogen is described as one of the most indicative scenarios for meeting Scotland Net-Zero carbon ambition set out for 2045. According to the 2021 Scottish Government’s hydrogen policy statement, the target is to invest 5 GW of renewable and low-car... Read More about Modelling real-world renewable hydrogen energy systems for enabling Scotland zero-carbon ambition..

Numerical investigations of a swirling two-phase air-water upward flow in straight and convergent vertical pipe. (2023)
Journal Article
MANIMARAN, R., KUMAR, M.S., KARUNAMURTHY, K. and HOSSAIN, M. 2023. Numerical investigations of a swirling two-phase air-water upward flow in straight and convergent vertical pipe. International journal of fluid mechanics research [online], 50(2), pages 31-57. Available from: https://doi.org/10.1615/InterJFluidMechRes.2023048031

In this paper, a numerical study is presented to analyze the flow parameters such as longitudinal and transverse velocities, hydrodynamic pressure, and volume fraction inside a vertical pipe. A vertical ascending swirl flow is established with the sp... Read More about Numerical investigations of a swirling two-phase air-water upward flow in straight and convergent vertical pipe..