All Outputs (50)

Machine learning model of acoustic signatures: towards digitalised thermal spray manufacturing. (2023)
Journal Article
VISWANATHAN, V., MCCLOSKEY, A., MATHUR, R., NGUYEN, D.T., FAISAL, N.H., PRATHURU, A., LLAVORI, I., MURPHY, A., TIWARI, A., MATTHEWS, A., AGRAWAL, A. and GOEL, S. 2024. Machine learning model of acoustic signatures: towards digitalised thermal spray manufacturing. Mechanical systems and signal processing [online], 208, article number 111030. Available from: https://doi.org/10.1016/j.ymssp.2023.111030

Thermal spraying, an important industrial surface manufacturing process in sectors such as aerospace, energy and biomedical, remains a skill intensive process often involving multiple trial runs impacting the yield. The core research challenge in dig... Read More about Machine learning model of acoustic signatures: towards digitalised thermal spray manufacturing..

Valorisation of whisky distillery waste as a sustainable source of antioxidant and antibacterial properties with neuroprotective potential. (2023)
Journal Article
BLAIKIE, L., WELGAMAGE DON, A., FRANZEN, X., FERNANDEZ, C., FAISAL, N. and KONG THOO LIN, P. [2023]. Valorisation of whisky distillery waste as a sustainable source of antioxidant and antibacterial properties with neuroprotective potential. Waste and biomass valorization [online], Online First. Available from: https://doi.org/10.1007/s12649-023-02292-4

Waste by-products such as pot ale are abundantly produced during the whisky distillation process and are conventionally used as livestock feed, however a significant proportion continues to require land and sea disposal. Here, the novel potential of... Read More about Valorisation of whisky distillery waste as a sustainable source of antioxidant and antibacterial properties with neuroprotective potential..

Acoustic emission sensor-assisted process monitoring of air plasma-sprayed titanium deposition. (2023)
Journal Article
VISWANATHAN, V., PRATHURU, A., FAISAL, N.H. and GOEL, S. 2023. Acoustic emission sensor-assisted process monitoring of air plasma-sprayed titanium deposition. Journal of thermal spray technology [online], 32(8), pages 2763-2777. Available from: https://doi.org/10.1007/s11666-023-01663-6

Acoustic emission is a sensing technique that offers the potential benefit for its use as an in situ monitoring tool for a wide range of manufacturing processes. This work attempts to highlight the robustness of using acoustic emission (AE) data for... Read More about Acoustic emission sensor-assisted process monitoring of air plasma-sprayed titanium deposition..

A comprehensive review of pre- and post-treatment approaches to achieve sustainable desalination for different water streams. (2023)
Journal Article
POIRIER, K., LOTFI, M., GARG, K., PATCHIGOLLA, K., ANTHONY, E.J., FAISAL, N.H., MULGUNDMATH, V., SAHITH, J.K., JADHAWAR, P., KOH, L., MOROSUK, T. and AL MHANNA, N. 2023. A comprehensive review of pre- and post-treatment approaches to achieve sustainable desalination for different water streams. Desalination [online], 566, article 116944. Available from: https://doi.org/10.1016/j.desal.2023.116944

Desalination is an energy intensive process requiring adequate pre- and post- treatment. The novelty of this paper is that it jointly reviews the technologies for pre-treatment, desalination and post-treatment and bridges the gap between them while c... Read More about A comprehensive review of pre- and post-treatment approaches to achieve sustainable desalination for different water streams..

Advances in structural analysis and process monitoring of thermoplastic composite pipes. (2023)
Journal Article
OKOLIE, O., LATTO, J., FAISAL, N., JAMIESON, H., MUKHERJI, A. and NJUGUNA, J. 2023. Advances in structural analysis and process monitoring of thermoplastic composite pipes. Heliyon [online], 9(7), e17918. Available from: https://doi.org/10.1016/j.heliyon.2023.e17918

Thermoplastic composite pipes (TCP) in comparison to other pipes have proven beneficial features due to its flexibility which includes being fit for purpose, lightweight and no corrosion. However, during the manufacturing of TCP which involves the co... Read More about Advances in structural analysis and process monitoring of thermoplastic composite pipes..

Influence of feedstock and thermal spray process on the phase composition of alumina coatings and their sliding wear. (2023)
Journal Article
ALI, O., AHMED, R., TOMA, F.-L., BERGER, L.-M., MATTHEY, B., FAISAL, N. and AHMED, K. 2023. Influence of feedstock and thermal spray process on the phase composition of alumina coatings and their sliding wear. Journal of thermal spray technology [online], 32(7), pages 2028-2053. Available from: https://doi.org/10.1007/s11666-023-01597-z

Suspension thermal spraying is an emerging coating technology that enables the deposition of dense-structured ceramic coatings. As wear resistance is a main application field of alumina (Al2O3) coatings, this study aimed to evaluate the dry reciproca... Read More about Influence of feedstock and thermal spray process on the phase composition of alumina coatings and their sliding wear..

Manufacturing defects in thermoplastic composite pipes and their effect on the in-situ performance of thermoplastic composite pipes in oil and gas applications. (2022)
Journal Article
OKOLIE, O., LATTO, J., FAISAL, N., JAMIESON, H., MUKHERJI, A. and NJUGUNA, J. 2023. Manufacturing defects in thermoplastic composite pipes and their effect on the in-situ performance of thermoplastic composite pipes in oil and gas applications. Applied composite materials [online], 30(1), pages 231-306. Available from: https://doi.org/10.1007/s10443-022-10066-9

Thermoplastic composite pipes (TCP), which are a form of fibre reinforced thermoplastic pipes, have proven benefits such as being lightweight and non-corrosive. However, during manufacturing, certain defects are induced because of certain parameters,... Read More about Manufacturing defects in thermoplastic composite pipes and their effect on the in-situ performance of thermoplastic composite pipes in oil and gas applications..

Numerical prediction of the effect of thermal plume of a standing human on the airborne aerosol flow in a room: assessment of the social distancing rule. (2022)
Journal Article
HOSSAIN, M., CHINENYE-KANU, N., FAISAL, N.H., PRATHURU, A., ASIM, T. and BANIK, S. 2023. Numerical prediction of the effect of thermal plume of a standing human on the airborne aerosol flow in a room: assessment of the social distancing rule. Aerosol science and engineering [online], 7(1), pages 96-106. Available from: https://doi.org/https://doi.org/10.1007/s41810-022-00165-2

The purpose of the study is to investigate the dispersion of droplet nuclei/aerosol which are produced during coughing and continuous talking to quantify the risk of infection due to airborne disease transmission. A three-dimensional modelling of aer... Read More about Numerical prediction of the effect of thermal plume of a standing human on the airborne aerosol flow in a room: assessment of the social distancing rule..

Application of pencil lead break (PLB) point source in the detection of interfacial defects in adhesive bonds. (2022)
Journal Article
PRATHURU, A., FAISAL, N., STEEL, J. and JIHAN, S. 2022. Application of pencil lead break (PLB) point source in the detection of interfacial defects in adhesive bonds. Journal of nondestructive evaluation [online], 41(4), article 65. Available from: https://doi.org/10.1007/s10921-022-00898-7

The presence of kissing bonds (zero-thickness disbond) along the interface of an adhesive bond is highly detrimental to its strength and longevity. The detection of these kind of defects has previously been attempted using several techniques such as... Read More about Application of pencil lead break (PLB) point source in the detection of interfacial defects in adhesive bonds..

A numerical study of the effects of temperature and injection velocity on oil-water relative permeability for enhanced oil recovery. (2022)
Journal Article
IYI, D., BALOGUN, Y., OYENEYIN, B. and FAISAL, N. 2022. A numerical study of the effects of temperature and injection velocity on oil-water relative permeability for enhanced oil recovery. International journal of heat and mass transfer [online], 191, article number 122863. Available from: https://doi.org/10.1016/j.ijheatmasstransfer.2022.122863

The paper quantitatively explore the influence of injection rate and temperature on oil-water relative permeability curves during hot water flooding operations in a porous medium flow. ANSYS-CFD was used to construct a numerical model of hot-water in... Read More about A numerical study of the effects of temperature and injection velocity on oil-water relative permeability for enhanced oil recovery..

Effect of fillers on compression loading performance of modified re-entrant honeycomb auxetic sandwich structures. (2022)
Journal Article
FAISAL, N.H., SCOTT, L., BOOTH, F., DUNCAN, S., MCLEOD, A., DROUBI, M.G. and NJUGUNA, J. 2023. Effect of fillers on compression loading performance of modified re-entrant honeycomb auxetic sandwich structures. Journal of strain analysis for engineering design [online], 58(2), pages 98-117. Available from: https://doi.org/10.1177/03093247221083210

The auxetic sandwich panels for structures have been designed to provide impact protection. The aim of this work is to modify an auxetic (re-entrant) honeycomb cell to reduce the stress concentrations within the cell structure, and further enhancemen... Read More about Effect of fillers on compression loading performance of modified re-entrant honeycomb auxetic sandwich structures..

Measuring residual strain and stress in thermal spray coatings using neutron diffractometers. (2021)
Journal Article
FAISAL, N.H., AHMED, R., PRATHURU, A.K., PARADOWSKA, A. and LEE, T.L. 2022. Measuring residual strain and stress in thermal spray coatings using neutron diffractometers. Experimental mechanics [online], 62(3), pages 369-392. Available from: https://doi.org/10.1007/s11340-021-00803-9

Background: During thermal spray coating, residual strain is formed within the coating and substrates due to thermo-mechanical processes and microstructural phase changes. Objective: This paper provides a comprehensive guide to researchers planning t... Read More about Measuring residual strain and stress in thermal spray coatings using neutron diffractometers..

A critical review on coupled geomechanics and fluid flow in naturally fractured reservoirs. (2021)
Journal Article
HAWEZ, H.K., SANAEE, R. and FAISAL, N.H. 2021. A critical review on coupled geomechanics and fluid flow in naturally fractured reservoirs. Journal of natural gas science and engineering [online], 95, article 104150. Available from: https://doi.org/10.1016/j.jngse.2021.104150

Naturally fractured reservoirs have been a source of challenging issues with regard to field development, well stability, drilling, and enhanced oil recovery, as a connected fracture system can totally dominate the flow patterns. Because of the high... Read More about A critical review on coupled geomechanics and fluid flow in naturally fractured reservoirs..

The impact of thermal ageing on sealing performance of HNBR packing elements in downhole installations in oilfield wellhead applications. (2021)
Journal Article
HASSANI, F., FAISAL, N.H., NISH, R., ROTHNIE, S. and NJUGUNA, J. 2022. The impact of thermal ageing on sealing performance of HNBR packing elements in downhole installations in oilfield wellhead applications. Journal of petroleum science and engineering [online], 208(part B), article 109200. Available from: https://doi.org/10.1016/j.petrol.2021.109200

Hydrogenated nitrile butyl rubber (HNBR) elastomers are highly resistant to chemicals and degradation, and they are good candidates to be adopted in aggressive environmental conditions of high temperature and pressure. As these service parameters are... Read More about The impact of thermal ageing on sealing performance of HNBR packing elements in downhole installations in oilfield wellhead applications..

Large scale manufacturing route to metamaterial coatings using thermal spray techniques and their response to solar radiation. (2021)
Journal Article
FAISAL, N.H., SELLAMI, N., VENTURI, F., HUSSAIN, T., MALLICK, T., MUHAMMAD-SUKKI, F., BISHOP, A., UPADHYAYA, H., KATIYAR, N.K. and GOEL, S. 2021. Large scale manufacturing route to metamaterial coatings using thermal spray techniques and their response to solar radiation. Emergent materials [online], 4(6), pages 1619-1633. Available from: https://doi.org/10.1007/s42247-021-00252-z

Metamaterials, an artificial periodic two- or three-dimensional configuration can change propagation characteristics of electromagnetic waves (i.e., reflection, transmission, absorption). The current challenges in the field of metamaterial coatings a... Read More about Large scale manufacturing route to metamaterial coatings using thermal spray techniques and their response to solar radiation..

Investigating the influence of the core material on the mechanical performance of a nitinol wire wrapped helical auxetic yarn. (2021)
Journal Article
FAISAL, N.H., FOWLIE, A., CONNELL, J., MACKENZIE, S., NOBLE, R. and PRATHURU, A.K. 2022. Investigating the influence of the core material on the mechanical performance of a nitinol wire wrapped helical auxetic yarn. Journal of strain analysis for engineering design [online], 57(5), pages 377-391. Available from: https://doi.org/10.1177/03093247211027085

Helical Auxetic Yarns (HAYs) can be used in a variety of applications, from healthcare to blast and impact resistance. This work focuses on the effect of the use of different core materials (e.g. rubber, polyurethane, polytetrafluoroethylene/teflon,... Read More about Investigating the influence of the core material on the mechanical performance of a nitinol wire wrapped helical auxetic yarn..

Modeling aerosol cloud aerodynamics during human coughing, talking, and breathing actions. (2021)
Journal Article
HOSSAIN, M. and FAISAL, N.H. 2021. Modeling aerosol cloud aerodynamics during human coughing, talking, and breathing actions. AIP advances [online], 11(4), article 045111. Available from: https://doi.org/10.1063/5.0042952

In this paper, we investigate the aerosol cloud flow physics during three respiratory actions by humans (such as coughing, talking, and breathing). With given variables (i.e., velocity, duration, particle size and number of particles, and ambient con... Read More about Modeling aerosol cloud aerodynamics during human coughing, talking, and breathing actions..

Experimental investigation of the effect of temperature on two-phase oil-water relative permeability. (2021)
Journal Article
BALOGUN, Y., IYI, D., FAISAL, N., OYENEYIN, B., OLUYEMI, G. and MAHON, R. 2021. Experimental investigation of the effect of temperature on two-phase oil-water relative permeability. Journal of petroleum science and engineering [online], 203, article ID 108645. Available from: https://doi.org/10.1016/j.petrol.2021.108645

Relative permeability is affected by several flow parameters, mainly the operating temperature and fluid viscosity. Fluid viscosities change with temperature, which correspondingly affects the relative permeability. Temperature is believed to have a... Read More about Experimental investigation of the effect of temperature on two-phase oil-water relative permeability..

Numerical modelling of the effect of wettability, interfacial tension and temperature on oil recovery at pore-scale level. (2021)
Journal Article
IYI, D., BALOGUN, Y., OYENEYIN, B. and FAISAL, N. 2021. Numerical modelling of the effect of wettability, interfacial tension and temperature on oil recovery at pore-scale level. Journal of petroleum science and engineering [online], 201, article ID 108453. Available from: https://doi.org/10.1016/j.petrol.2021.108453

A numerical investigation into the effect of wettability and temperature on oil recovery with a hot water injection at different temperatures is reported in this paper. The computational domain is a two-dimensional porous medium (reservoir) maintaine... Read More about Numerical modelling of the effect of wettability, interfacial tension and temperature on oil recovery at pore-scale level..

Electroanalytical determination of gallic acid in red and white wine samples using cobalt oxide nanoparticles-modified carbon-paste electrodes. (2020)
Journal Article
CHIKERE, C.O., HOBBEN, E., FAISAL, N.H., KONG THOO LIN, P. and FERNANDEZ, C. 2021. Electroanalytical determination of gallic acid in red and white wine samples using cobalt oxide nanoparticles-modified carbon-paste electrodes. Microchemical journal [online], 160(part B), article ID 105668. Available from: https://doi.org/10.1016/j.microc.2020.105668

Beverages like wines, have exhibited a high level of antioxidant capacity, specifically from compounds like Gallic acid (GA) and their derivatives. GA has shown great importance in the food industry and pharmaceutical industry as a food additive, ant... Read More about Electroanalytical determination of gallic acid in red and white wine samples using cobalt oxide nanoparticles-modified carbon-paste electrodes..