Skip to main content

Research Repository

Advanced Search

Optimising crystallisation during rapid prototyping of Fe3O4-PA6 polymer nanocomposite component. [Dataset] (2022)
Dataset
GUPTA, R., NJUGUNA, J. and PANCHOLI, K. 2022. Optimising crystallisation during rapid prototyping of Fe3O4-PA6 polymer nanocomposite component. [Dataset]. Journal of composites science [online], 6(3), article 83. Available from: https://www.mdpi.com/2504-477X/6/3/83/s1

This paper discusses the effect of the catalyst and the activator concentrations on the properties of polymerised PA6-PMC containing 1 wt% uncoated MNPs. The focus herein is to tune the degree of crystallinity of the prepared PA6-PMC for the optimum... Read More about Optimising crystallisation during rapid prototyping of Fe3O4-PA6 polymer nanocomposite component. [Dataset].

Design and analysis of non-threaded drill pipe connector. (2022)
Thesis
THAKUR, J.O. 2022. Design and analysis of non-threaded drill pipe connector. Robert Gordon University, MRes thesis. Hosted on OpenAIR [online]. Available from: https://doi.org/10.48526/rgu-wt-2271554

This thesis determines the feasibility and application opportunities of a Snap-Latch Ring design based on the Pin and Box non-threaded connectors design. Modern drill pipes are connected by rotary threaded shouldered connections that have been prone... Read More about Design and analysis of non-threaded drill pipe connector..

Magnetic polyamide 6 nanocomposites for increasing damage tolerance through self-healing of composite structures. (2021)
Thesis
GUPTA, R. 2021. Magnetic polyamide 6 nanocomposites for increasing damage tolerance through self-healing of composite structures. Robert Gordon University, PhD thesis. Hosted on OpenAIR [online]. Available from: https://doi.org/10.48526/rgu-wt-1987943

Self-healing materials have the ability to repeatedly repair damages that occur before complete failure of materials. The development of stimuli-responsive self-healing materials has been in demand recently for composite structures, since their failu... Read More about Magnetic polyamide 6 nanocomposites for increasing damage tolerance through self-healing of composite structures..

An investigation of casing structural integrity in shale gas horizontal wells during hydraulic fracturing using FEA and machine learning algorithms. (2021)
Thesis
MOHAMMED, A.I. 2021. An investigation of casing structural integrity in shale gas horizontal wells during hydraulic fracturing using FEA and machine learning algorithms. Robert Gordon University, PhD thesis. Hosted on OpenAIR [online]. Available from: https://doi.org/10.48526/rgu-wt-1603216

Unconventional oil and gas operators are currently facing the challenge of casing lateral buckling and/or deformation during shale gas wells stimulation through hydraulic fracturing. Failure of the casing during this process can lead to huge financia... Read More about An investigation of casing structural integrity in shale gas horizontal wells during hydraulic fracturing using FEA and machine learning algorithms..

Lightweight, affordable, low power solar groundwater piston pump for rural remote regions. (2020)
Thesis
AZEEM UDDIN, A.I. 2020. Lightweight, affordable, low power solar groundwater piston pump for rural remote regions. Robert Gordon University, PhD thesis. Hosted on OpenAIR [online]. Available from: https://doi.org/10.48526/rgu-wt-1254576

Solar photovoltaic powered groundwater pumping systems (SPWPS) are popular way of fetching water from boreholes in semi-arid areas in rural remote regions of most developing countries, where commercial water and electricity supply is out of reach. As... Read More about Lightweight, affordable, low power solar groundwater piston pump for rural remote regions..

Assessment of nanoparticle emission of polypropylene, polyester and epoxy nanocomposites during automated drilling process. (2020)
Thesis
STAROST, K.J. 2020. Assessment of nanoparticle emission of polypropylene, polyester and epoxy nanocomposites during automated drilling process. Robert Gordon University [online], PhD thesis. Available from: https://openair.rgu.ac.uk

Polymer nanocomposites are becoming established widely across the industry due to (among other reasons) their lightweight performance advantages, and ability to meticulously target material properties with great control and precision. Despite the ben... Read More about Assessment of nanoparticle emission of polypropylene, polyester and epoxy nanocomposites during automated drilling process..

Processing, structure and thermo-mechanical properties of reclaimed nanoclay, and its application in polyamide 6 and low-density polyethylene nanocomposites. (2020)
Thesis
SIDDIQUE, S.A. 2020. Processing, structure and thermo-mechanical properties of reclaimed nanoclay, and its application in polyamide 6 and low-density polyethylene nanocomposites. Robert Gordon University [online], PhD thesis. Available from: https://openair.rgu.ac.uk

Oil-based mud (OBM) wastes are generated every year all over the world, and remain a serious challenge for the oil and gas industry. The potential solution for this global problem is either to destroy these hazardous chemicals completely - a signific... Read More about Processing, structure and thermo-mechanical properties of reclaimed nanoclay, and its application in polyamide 6 and low-density polyethylene nanocomposites..

Abstract book for the proceedings of the 4th International conference on structural nano composites (NANOSTRUC 2018), 23-24 May 2018, Berlin, Germany. (2018)
Conference Proceeding
NJUGUNA, J. and NGO, H.-D. (eds.) 2018. Abstract book for the proceedings of the 4th International conference on structural nano composites (NANOSTRUC 2018), 23-24 May 2018, Berlin, Germany [online]. Available from: https://www.nanostruc.info/nanostruc-conference.html

The purpose of The 4th International Conference on Structural Nano Composites (NANOSTRUC2018) is to promote activities in various areas of materials and structures by providing a forum for exchange of ideas, presentation of technical achievements and... Read More about Abstract book for the proceedings of the 4th International conference on structural nano composites (NANOSTRUC 2018), 23-24 May 2018, Berlin, Germany..

Cross sensitivity analysis of optical fibre-based sensing for high pressure, high temperature measurement in oil and gas applications. (2018)
Thesis
AMOS, S.U. 2018. Cross sensitivity analysis of optical fibre-based sensing for high pressure, high temperature measurement in oil and gas applications. Robert Gordon University, PhD thesis.

Measurements of physical parameters like pressure, temperature, flow rate, vibrations and displacement in harsh environment are often desired in the oil and gas industry. Pressure and temperature are the most important parameters among them. Changes... Read More about Cross sensitivity analysis of optical fibre-based sensing for high pressure, high temperature measurement in oil and gas applications..

Demulsification and recycling of spent oil based drilling fluid as nanofiller for polyamide 6 nanocomposites. (2016)
Thesis
ADEGBOTOLU, U.V. 2016. Demulsification and recycling of spent oil based drilling fluid as nanofiller for polyamide 6 nanocomposites. Robert Gordon University, PhD thesis.

Spent oil-based drilling fluid and cutting wastes are global liabilities due to their hazardous hydrocarbon content, which impacts negatively on flora, fauna, and global carbon footprint. The formulation of two demulsifiers to ensure chemically-enhan... Read More about Demulsification and recycling of spent oil based drilling fluid as nanofiller for polyamide 6 nanocomposites..

Abstract book for the proceedings of the 3rd International conference on structural nano composites (NANOSTRUC 2016), 12-15 September 2016, Aberdeen, UK. (2016)
Conference Proceeding
STAROST, K. and NJUGUNA, J. (eds.) 2016. Abstract book for the proceedings of the 3rd International conference on structural nano composites (NANOSTRUC 2016), 12-15 September 2016, Aberdeen, UK. Berlin: Nanostruc [online]. Available from: https://web.archive.org/web/20180123120946/http://www.nanostruc.info/nanostruc-conference.html

The theme of the 3rd NANOSTRUC 2016 conference is on ‘Nanoscience and Nanotechnologies – Recent Advances towards Nanoproducts and Applications’. The conference is aimed to promote activities in various areas on materials and structures by providing a... Read More about Abstract book for the proceedings of the 3rd International conference on structural nano composites (NANOSTRUC 2016), 12-15 September 2016, Aberdeen, UK..

Abstract book for the proceedings of the 2nd International conference on structural nano composites (NANOSTRUC 2014), 20-21 May 2014, Madrid, Spain. (2014)
Conference Proceeding
NJUGUNA, J., STAROST, K. and VERDEJO, R. (eds.) 2014. Abstract book for the proceedings of the 2nd International conference on structural nano composites (NANOSTRUC 2014), 20-21 May 2014, Madrid, Spain.

The purpose of the 2nd International Conference on Structural Nano Composites (NANOSTRUC 2014) is to promote activities in various areas of materials and structures by providing a forum for exchange of ideas, presentation of technical achievements an... Read More about Abstract book for the proceedings of the 2nd International conference on structural nano composites (NANOSTRUC 2014), 20-21 May 2014, Madrid, Spain..

Abstract book for the proceedings of the 1st International conference on structural nano composites (NANOSTRUC 2012), 02-04 July 2012, Cranfield, UK. (2012)
Conference Proceeding
SACHSE, S. and NJUGUNA, J. (eds.) 2012. Abstract book for the proceedings of the 1st International conference on structural nano composites (NANOSTRUC 2012), 02-04 July 2012, Cranfield, UK.

The purpose of the 2012 International Conference on Structural Nano Composites (NanoStruc 2012) is to promote activities in various areas of materials and structures by providing a forum for exchange of ideas, presentation of technical achievements a... Read More about Abstract book for the proceedings of the 1st International conference on structural nano composites (NANOSTRUC 2012), 02-04 July 2012, Cranfield, UK..