Skip to main content

Research Repository

Advanced Search

All Outputs (10)

Applications of numerical simulations in built environment. (2019)
Journal Article
ASIM, T., MISHRA, R., RODRIGUES, S. and NSOM, B. 2019. Applications of numerical simulations in built environment. International journal of condition monitoring and diagnostic engineering management [online], 22(4), pages 9-14. Available from: https://apscience.org/comadem/index.php/comadem/article/view/172

Different types of numerical simulations have been in use for the design and performance analysis of built environment for some time. Most of these simulations are based on simplistic models and methods, such as steady-state approach, which strictly... Read More about Applications of numerical simulations in built environment..

Performance improvement of a circulating fluidized bed boiler through flow modifications in primary air supply system. (2019)
Journal Article
LIU, X., ZHU, G., ZHANG, Y., ASIM, T. and MISHRA, R. 2019. Performance improvement of a circulating fluidized bed boiler through flow modifications in primary air supply system. International journal of condition monitoring and diagnostic engineering management [online], 22(4), pages 29-43. Available from: https://apscience.org/comadem/index.php/comadem/article/view/175

The primary air supply system is a key component of a Circulating Fluidized Bed (CFB) boiler. The uniformity of air flow through the primary air supply system is important for highly efficient operation of the CFB boiler. Non-uniform air flow distrib... Read More about Performance improvement of a circulating fluidized bed boiler through flow modifications in primary air supply system..

Development of a novel methodology for calculating the thermal efficiency of clean fuel boilers based on error analysis method. (2019)
Journal Article
LIU, X., ASIM, T., ZHU, G., ZHANG, Y. and MISHRA, R. 2019. Development of a novel methodology for calculating the thermal efficiency of clean fuel boilers based on error analysis method. International journal of condition monitoring and diagnostic engineering management [online], 22(2), pages 5-9. Available from: https://apscience.org/comadem/index.php/comadem/article/view/140

Clean fuel boilers often use natural gas and wood pellets as their primary fuel, which result in reduced emissions from the boiler. Accurate determination of the thermal efficiency of these boilers plays a vital role in appropriately controlling the... Read More about Development of a novel methodology for calculating the thermal efficiency of clean fuel boilers based on error analysis method..

Experimental investigations on a grate incinerator of L-shaped flame fuelled by rural solid waste. (2019)
Journal Article
LIU, X., ASIM, T., ZHU, G., ZHANG, Y. and MISHRA, R. 2019. Experimental investigations on a grate incinerator of L-shaped flame fuelled by rural solid waste. International journal of condition monitoring and diagnostic engineering management [online], 22(2), pages 11-19. Available from: https://apscience.org/comadem/index.php/comadem/article/view/148

In this article, investigations on the structural parameters and aerodynamic characteristics of the furnace arches of a small scale L-shaped flame incinerator for the disposal of rural solid waste are carried out. A novel configuration of furnace arc... Read More about Experimental investigations on a grate incinerator of L-shaped flame fuelled by rural solid waste..

Flow visualization within a ventricular inhaler device using open source CFD for performance enhancement. (2019)
Journal Article
AHMED, N., ASIM, T., MISHRA, R. and NSOM, B. 2019. Flow visualization within a ventricular inhaler device using open source CFD for performance enhancement. International journal of condition monitoring and diagnostic engineering management [online], 22(2), pages 21-26. Available from: https://apscience.org/comadem/index.php/comadem/article/view/142

A Ventricular Inhaler Device (VID) is used as a quick-relief medication for treating wheezing and shortness of breath. VID uses Albuterol (a bronchodilator) to relax muscles and open airways. The flow distribution of Albuterol within the VID is the p... Read More about Flow visualization within a ventricular inhaler device using open source CFD for performance enhancement..

Effects of asymmetric flow within vaneless diffuser on the performance characteristics of the compressor stage of a turbocharger. (2019)
Journal Article
AHMED, N., ASIM, T. and MISHRA, R. 2019. Effects of asymmetric flow within vaneless diffuser on the performance characteristics of the compressor stage of a turbocharger. International journal of condition monitoring and diagnostic engineering management [online], 22(2), pages 39-57. Available from: https://apscience.org/comadem/index.php/comadem/article/view/147

Modern engines use turbocharger that provides the extra boost to the engines and hence helps in downsizing. Turbochargers comprise of the turbine stage, bearing housing and the compressor stage. Compressor Stage helps in providing compressed air to t... Read More about Effects of asymmetric flow within vaneless diffuser on the performance characteristics of the compressor stage of a turbocharger..

Design for additive manufacturing and its effect on the performance characteristics of a control valve trim. (2019)
Journal Article
SINGH, D., CHARLTON, M., ASIM, T. and MISHRA, R. 2019. Design for additive manufacturing and its effect on the performance characteristics of a control valve trim. International journal of condition monitoring and diagnostic engineering management [online], 22(2), pages 59-67. Available from: https://apscience.org/comadem/index.php/comadem/article/view/145

Additive Manufacturing methods have been gaining popularity over the traditional manufacturing methods in the past three decades due to shorter product development cycles and reduced manufacturing costs. Selective Laser Melting is one of the most pop... Read More about Design for additive manufacturing and its effect on the performance characteristics of a control valve trim..

Thermal characterization of commercial electric radiators. (2019)
Journal Article
ASIM, T., ZALA, K., MISHRA, R., CONOR, F., CONOR, S., MIAN, N. and NSOM, B. 2019. Thermal characterization of commercial electric radiators. International journal of condition monitoring and diagnostic engineering management [online], 22(2), pages 27-31. Available from: https://apscience.org/comadem/index.php/comadem/article/view/143

Electric radiators with a storage element are commonly used to provide heating in cold weather. The thermal performance of an electric radiator is dependent on a number of key design features such as the core material, shape of radiator’s outer surfa... Read More about Thermal characterization of commercial electric radiators..

Effects of blade tapering on the performance of vertical axis wind turbines analysed through advanced visualization techniques. (2019)
Journal Article
ZAHARIEV, M., ASIM, T., MISHRA, R. and NSOM, B. 2019. Effects of blade tapering on the performance of vertical axis wind turbines analysed through advanced visualization techniques. International journal of condition monitoring and diagnostic engineering management [online], 22(2), pages 69-74. Available from: https://apscience.org/comadem/index.php/comadem/article/view/146

Harnessing the wind energy effectively and efficiently, to fulfil the ever increasing energy demands, has long been an area of active research. This research study is aimed at exploring the blade design of a small-to-medium sized Savonius type Vertic... Read More about Effects of blade tapering on the performance of vertical axis wind turbines analysed through advanced visualization techniques..

Improved design of a multi-stage continuous-resistance trim for minimum energy loss in control valves. (2019)
Journal Article
ASIM, T., OLIVEIRA, A., CHARLTON, M. and MISHRA, R. 2019. Improved design of a multi-stage continuous-resistance trim for minimum energy loss in control valves. Energy [online], 174, pages 954-971. Available from: https://doi.org/10.1016/j.energy.2019.03.041

Control valves used in energy systems are often integrated with trims having well designed flow paths to regulate fluid flow. These trims, known as multi-stage continuous-resistance trims, comprise of staggered arrangement of circular cylinders enabl... Read More about Improved design of a multi-stage continuous-resistance trim for minimum energy loss in control valves..