Quality of surface texture and mechanical properties of PLA and PA-based material reinforced with carbon fibers manufactured by FDM and CFF 3D printing technologies.

Saharudin, Mohd Shahneel; Hajnys, Jiri; Kozior, Tomasz; Gogolewski, Damian; Zmarz?y, Pawe?

doi:10.3390/polym13111671

Optical fibre-based sensors for oil and gas applications. (2021)
Journal Article
JOHNY, J., AMOS, S. and PRABHU, R. 2021. Optical fibre-based sensors for oil and gas applications. Sensors [online], 21(8), article 6047. Available from: https://doi.org/10.3390/s21186047

Oil and gas (O&G) explorations moving into deeper zones for enhanced oil and gas recovery are causing serious safety concerns across the world. The sensing of critical multiple parameters like high pressure, high temperature (HPHT), chemicals, etc.,... Read More about Optical fibre-based sensors for oil and gas applications..

Pulse train generation in a distributed gain fibre amplifier. (2021)
Journal Article
ATUBA, S. 2021. Pulse train generation in a distributed gain fibre amplifier. Results in optics [online], 5, pages 100136. Available from: https://doi.org/10.1016/j.rio.2021.100136

This work shows the generation of an array of chirped compressed periodic waves with distributed gain in a nonlinear fibre. In particular, with suitable tailoring of the gain to vary along the longitudinal distance while the dispersion and nonlineari... Read More about Pulse train generation in a distributed gain fibre amplifier..

An application of FEA and machine learning for the prediction and optimisation of casing buckling and deformation responses in shale gas wells in an in-situ operation. (2021)
Journal Article
MOHAMMED, A.I., BARTLETT, M., OYENEYIN, B., KAYVANTASH, K. and NJUGUNA, J. 2021. An application of FEA and machine learning for the prediction and optimisation of casing buckling and deformation responses in shale gas wells in an in-situ operation. Journal of natural gas science and engineering [online], 95, article 104221. Available from: https://doi.org/10.1016/j.jngse.2021.104221

This paper proposes a novel way to study the casing structural integrity using two approaches of finite element analysis (FEA) and machine learning. The approach in this study is unique, as it captures the pertinent parameters influencing the casing... Read More about An application of FEA and machine learning for the prediction and optimisation of casing buckling and deformation responses in shale gas wells in an in-situ operation..

Anti-corrosion behavior of olmesartan for soft-cast steel in 1 mol dm−3 HCL. (2021)
Journal Article
PRAVEEN, B.M., ALHADHRAMI, A., PRASANNA, B.M., HEBBAR, N. and PRABHU, R. 2021. Anti-corrosion behavior of olmesartan for soft-cast steel in 1 mol dm−3 HCl. Coatings [online], 11(8), article 965. Available from: https://doi.org/10.3390/coatings11080965

This study discusses the effects of temperature on corrosion inhibition for soft-cast steel by the pharmaceutically active drug olmesartan in 1 mol dm−3 HCl. The sufficient number of electron-rich elements and non-bonding π electrons in its structure... Read More about Anti-corrosion behavior of olmesartan for soft-cast steel in 1 mol dm−3 HCL..

Effect of two-phase gas-liquid flow patterns on cuttings transport efficiency. (2021)
Journal Article
SALUBI, V., MAHON, R., OLUYEMI, G. and OYENEYIN, B. 2022. Effect of two-phase gas-liquid flow patterns on cuttings transport efficiency. Journal of petroleum science and engineering [online], 208(part A), article 109281. Available from: https://doi.org/10.1016/j.petrol.2021.109281

Effective cuttings transport and accurate drilling hydraulics prediction remain issues of concern during drilling operations of horizontal, extended reach and multilateral wells. While several studies have adopted a two- or three-layered modelling ap... Read More about Effect of two-phase gas-liquid flow patterns on cuttings transport efficiency..

Correction to: Swelling performance of sodium polyacrylate and poly(acrylamide‑co‑acrylic acid) potassium salt. (2021)
Journal Article
MAHON, R., BALOGUN, Y., OLUYEMI, G., and NJUGUNA, J. 2021. Correction to: Swelling performance of sodium polyacrylate and poly(acrylamide-co-acrylic acid) potassium salt. SN applied sciences [online], 3(8), article 756. Available from: https://doi.org/10.1007/s42452-021-04654-w

The original version of this Article contained an error of judgement in the inclusion of the names of the polymers and their application. The names of the polymers and their application were included, however, due to potential issues relating to conf... Read More about Correction to: Swelling performance of sodium polyacrylate and poly(acrylamide‑co‑acrylic acid) potassium salt..

A critical review on coupled geomechanics and fluid flow in naturally fractured reservoirs. (2021)
Journal Article
HAWEZ, H.K., SANAEE, R. and FAISAL, N.H. 2021. A critical review on coupled geomechanics and fluid flow in naturally fractured reservoirs. Journal of natural gas science and engineering [online], 95, article 104150. Available from: https://doi.org/10.1016/j.jngse.2021.104150

Naturally fractured reservoirs have been a source of challenging issues with regard to field development, well stability, drilling, and enhanced oil recovery, as a connected fracture system can totally dominate the flow patterns. Because of the high... Read More about A critical review on coupled geomechanics and fluid flow in naturally fractured reservoirs..

The impact of thermal ageing on sealing performance of HNBR packing elements in downhole installations in oilfield wellhead applications. (2021)
Journal Article
HASSANI, F., FAISAL, N.H., NISH, R., ROTHNIE, S. and NJUGUNA, J. 2022. The impact of thermal ageing on sealing performance of HNBR packing elements in downhole installations in oilfield wellhead applications. Journal of petroleum science and engineering [online], 208(part B), article 109200. Available from: https://doi.org/10.1016/j.petrol.2021.109200

Hydrogenated nitrile butyl rubber (HNBR) elastomers are highly resistant to chemicals and degradation, and they are good candidates to be adopted in aggressive environmental conditions of high temperature and pressure. As these service parameters are... Read More about The impact of thermal ageing on sealing performance of HNBR packing elements in downhole installations in oilfield wellhead applications..

Large scale manufacturing route to metamaterial coatings using thermal spray techniques and their response to solar radiation. (2021)
Journal Article
FAISAL, N.H., SELLAMI, N., VENTURI, F., HUSSAIN, T., MALLICK, T., MUHAMMAD-SUKKI, F., BISHOP, A., UPADHYAYA, H., KATIYAR, N.K. and GOEL, S. 2021. Large scale manufacturing route to metamaterial coatings using thermal spray techniques and their response to solar radiation. Emergent materials [online], 4(6), pages 1619-1633. Available from: https://doi.org/10.1007/s42247-021-00252-z

Metamaterials, an artificial periodic two- or three-dimensional configuration can change propagation characteristics of electromagnetic waves (i.e., reflection, transmission, absorption). The current challenges in the field of metamaterial coatings a... Read More about Large scale manufacturing route to metamaterial coatings using thermal spray techniques and their response to solar radiation..

Investigating the influence of the core material on the mechanical performance of a nitinol wire wrapped helical auxetic yarn. (2021)
Journal Article
FAISAL, N.H., FOWLIE, A., CONNELL, J., MACKENZIE, S., NOBLE, R. and PRATHURU, A.K. 2022. Investigating the influence of the core material on the mechanical performance of a nitinol wire wrapped helical auxetic yarn. Journal of strain analysis for engineering design [online], 57(5), pages 377-391. Available from: https://doi.org/10.1177/03093247211027085

Helical Auxetic Yarns (HAYs) can be used in a variety of applications, from healthcare to blast and impact resistance. This work focuses on the effect of the use of different core materials (e.g. rubber, polyurethane, polytetrafluoroethylene/teflon,... Read More about Investigating the influence of the core material on the mechanical performance of a nitinol wire wrapped helical auxetic yarn..

Effect of produced sand particles and fines on scale inhibitor: a review. (2021)
Journal Article
ANYANWU, U.C. and OLUYEMI, G.F. 2021. Effect of produced sand particles and fines on scale inhibitor: a review. Colloids and interfaces [online], 5(3), article 35. Available from: https://doi.org/10.3390/colloids5030035

Application of scale inhibitors in oil and gas production is aimed at mitigating scale blockage during production. Many experimental, mathematical, and numerical simulation modeling works have been carried out to evaluate behavior, performance, and i... Read More about Effect of produced sand particles and fines on scale inhibitor: a review..

Performance improvement of a CPV system: experimental investigation into passive cooling with phase change materials. (2021)
Journal Article
SHARMA, S., SELLAMI, N., TAHIR, A.A., MALLICK, T.K. and BHAKAR, R. 2021. Performance improvement of a CPV system: experimental investigation into passive cooling with phase change materials. Energies [online], 14(12), article 3550. Available from: https://doi.org/10.3390/en14123550

High temperature and overheating of photovoltaic panels lead to efficiency losses and eventual degradation. For solar PV systems, this is a significant impediment for achieving economic viability. In this study, a novel Window-Integrated Concentrated... Read More about Performance improvement of a CPV system: experimental investigation into passive cooling with phase change materials..

Current status and possible future applications of marine current energy devices in Malaysia: a review. (2021)
Journal Article
KAI, L.Y., SARIP, S., KAIDI, H.M., ARDILA-REY, J.A., SAMSUDDIN, N.M., MUHTAZARUDDIN, M.N., MUHAMMAD-SUKKI, F. and AZIZ, S.A. 2021. Current status and possible future applications of marine current energy devices in Malaysia: a review. IEEE access [online], 9, pages 86869-86888. Available from: https://doi.org/10.1109/ACCESS.2021.3088761

Malaysia has a great potential to harness energy in water due to its long coastline within the South China Sea and the Straits of Malacca. Malaysia's energy mix could be improved using marine current energy devices (MCEDs) to replace fossil fuel and... Read More about Current status and possible future applications of marine current energy devices in Malaysia: a review..

State-of-the-art review on the energy performance of semi-transparent building integrated photovoltaic across a range of different climatic and environmental conditions. (2021)
Journal Article
KHALIFEEH, R., ALRASHIDI, H., SELLAMI, N., MALLICK, T. and ISSA, W. 2021. State-of-the-art review on the energy performance of semi-transparent building integrated photovoltaic across a range of different climatic and environmental conditions. Energies [online], 14(12): building integrated PV system, article 3412. Available from: https://doi.org/10.3390/en14123412

Semi-transparent Building Integrated Photovoltaics provide a fresh approach to the renewable energy sector, combining the potential of energy generation with aesthetically pleasing, multi-functional building components. Employing a range of technolog... Read More about State-of-the-art review on the energy performance of semi-transparent building integrated photovoltaic across a range of different climatic and environmental conditions..

Numerical study of pipeline leak detection for gas-liquid stratified flow. (2021)
Journal Article
ADEGBOYE, M.A., KARNIK, A. and FUNG, W.-K. 2021. Numerical study of pipeline leak detection for gas-liquid stratified flow. Journal of natural gas science and engineering [online], 94, article 104054. Available from: https://doi.org/10.1016/j.jngse.2021.104054

Multiphase flows are of paramount importance in the oil and gas industry, considering that most petroleum industries produce and transport oil and gas simultaneously. However, systematic research on pipeline leakage conveying more than one phase at a... Read More about Numerical study of pipeline leak detection for gas-liquid stratified flow..

Type-2 neutrosophic number based multi-attributive border approximation area comparison (MABAC) approach for offshore wind farm site selection in USA. (2021)
Journal Article
DEVECI, M., ERDOGAN, N., CALI, U., STEKLI, J. and ZHONG, S. 2021. Type-2 neutrosophic number based multi-attributive border approximation area comparison (MABAC) approach for offshore wind farm site selection in USA. Engineering applications of artificial intelligence [online], 103, article 104311. Available from: https://doi.org/10.1016/j.engappai.2021.104311

The technical, logistical, and ecological challenges associated with offshore wind development necessitate an extensive site selection analysis. Technical parameters such as wind resource, logistical concerns such as distance to shore, and ecological... Read More about Type-2 neutrosophic number based multi-attributive border approximation area comparison (MABAC) approach for offshore wind farm site selection in USA..

Pedestrianisation zoning and air quality in Hong Kong. (2021)
Journal Article
CHAN, A. and CHOW, K. 2021. Pedestrianisation zoning and air quality in Hong Kong. Global journal of engineering sciences [online], 8(2), article number 000684. Available from: https://doi.org/10.33552/GJES.2021.08.000684

Air quality assessment in the vicinity of the Causeway Bay Pedestrianisation Scheme is conducted. The study analyses the concentration of respiratory suspended particulates, nitrogen oxides and carbon monoxides, and shows that reductions for the thre... Read More about Pedestrianisation zoning and air quality in Hong Kong..

Computational fluid dynamics modelling of multiphase flows in double elbow geometries. (2021)
Journal Article
OGUNSESAN, O.A., HOSSAIN, M. and DROUBI, M.G. 2021. Computational fluid dynamics modelling of multiphase flows in double elbow geometries. Proceedings of the Institution of Mechanical Engineers, Part E: journal of process mechanical engineering [online], 235(6), pages 1835-1846. Available from: https://doi.org/10.1177/09544089211021744

This study investigates the effects of elbow on the transition and development of multiphase flow using computational fluid dynamics modelling techniques. The Eulerian - Multifluid VOF model coupled with an Interfacial Area Transport Equation has bee... Read More about Computational fluid dynamics modelling of multiphase flows in double elbow geometries..

Women in circuits and systems (WiCAS) and young professionals (YP) at ICECS 2020. (2021)
Journal Article
DI CAPUA, G., PAYVAND, M., COVI, E. and FOUGH, N. 2021. Women in circuits and systems (WiCAS) and young professionals (YP) at ICECS 2020. IEEE circuits and systems magazine [online], 21(2), pages 122-125. Available from: https://doi.org/10.1109/MCAS.2021.3071634

A 'Women in Circuits and Systems' (WiCAS) event and a 'Young Professionals' (YP) event took place during the 27th Institute of Electrical and Electronics Engineers (IEEE) International conference on electronics circuits and systems (ICECS), the flags... Read More about Women in circuits and systems (WiCAS) and young professionals (YP) at ICECS 2020..

Quality of surface texture and mechanical properties of PLA and PA-based material reinforced with carbon fibers manufactured by FDM and CFF 3D printing technologies. (2021)
Journal Article
SAHARUDIN, M.S., HAJNYS, J., KOZIOR, T., GOGOLEWSKI, D. and ZMARZŁY, P. 2021. Quality of surface texture and mechanical properties of PLA and PA-based material reinforced with carbon fibers manufactured by FDM and CFF 3D printing technologies. Polymers [online], 13(11), article 1671. Available from: https://doi.org/10.3390/polym13111671

The paper presents the results of mechanical tests of models manufactured with two 3D printing technologies, FDM and CFF. Both technologies use PLA or PA-based materials reinforced with carbon fibers. The work includes both uniaxial tensile tests of... Read More about Quality of surface texture and mechanical properties of PLA and PA-based material reinforced with carbon fibers manufactured by FDM and CFF 3D printing technologies..

All Outputs (58)