All Outputs (102)

Hybrid renewable-Hydrogen energy systems and their role in the energy transition. (2024)
Presentation / Conference
ALI, D. and ATTEYA, A.I. 2024. Hybrid renewable-hydrogen energy systems and their role in the energy transition. Presented at the 2024 Hydrogen accelerator meeting, 22 March 2024, Edinburgh, UK.

Global energy-related CO2 emissions grew by 1.1% in 2023, increasing 410 Mt to reach a new record of 37.4 Gt. Emissions from coal accounted for more than 65% of the increase in 2023. The global shortfall in hydropower generation due to droughts drove... Read More about Hybrid renewable-Hydrogen energy systems and their role in the energy transition..

Unlocking hidden geothermal potential: leveraging artificial intelligence for subsurface exploration. (2024)
Presentation / Conference
ALGAIAR, M.M. 2024. Unlocking hidden geothermal potential: leveraging artificial intelligence for subsurface exploration. Presented at the 3rd Annual geothermal seminar (Geothermal 2024): heating up the market, 21-22 February 2024, [virtual event].

Geothermal energy shows potential as a renewable and sustainable energy source. However, geothermal exploration is challenging and costly due to the subsurface complexities involved in locating potential reservoirs. Recent advancements in artificial... Read More about Unlocking hidden geothermal potential: leveraging artificial intelligence for subsurface exploration..

Formation integrity evaluation for geosequestration of CO2 in depleted petroleum reservoirs under cyclic stress conditions. (2023)
Presentation / Conference
AMINAHO, E. 2023. Formation integrity evaluation for geosequestration of CO2 in depleted petroleum reservoirs under cyclic stress conditions. Presented at the 2023 Sand Management Network (SMN) students annual competition, Aberdeen, UK, 29 November 2023.

This study aims to evaluate formation integrity during cyclic injection and withdrawal of CO2 gas stream and the impact of impurities in the CO2 gas stream on the petrophysics and brittleness of reservoir and caprock. It also aims to identify possib... Read More about Formation integrity evaluation for geosequestration of CO2 in depleted petroleum reservoirs under cyclic stress conditions..

Caprock integrity evaluation for geosequestration of CO2 in low-temperature reservoirs. (2023)
Presentation / Conference
AMINAHO, E.N. 2023. Caprock integrity evaluation for geosequestration of CO2 in low-temperature reservoirs. Presented at the UK Carbon Capture and Storage Research Community (UKCCSRC) flexible funding 2022 projects webinar, 9 November 2023, [virtual event].

This presentation gives an overview of the context and methodology of a project that aimed to identify suitable geological reservoirs for CO2 storage. The project was particularly focused on the issues of caprock integrity, and the assessment of how... Read More about Caprock integrity evaluation for geosequestration of CO2 in low-temperature reservoirs..

Scalable metamaterial thermally sprayed catalyst coatings for nuclear reactor high temperature solid oxide steam electrolysis. (2023)
Presentation / Conference
HOSSAIN, M., FAISAL, N., PRATHURU, A., KURUSHINA, V., RAJENDRAN, V., CAI, Q., HORRI, B. and KUMAR, A. 2023. Scalable metamaterial thermally sprayed catalyst coatings for nuclear reactor high temperature solid oxide steam electrolysis. Presented at the 1st IUT (Islamic University of Technology) International conference on mechanical, material and production engineering 2023 (IUT-ICMMPE 2023), 21-22 July 2023, Gaziput, Dhaka.

The UK government in their 2021 Hydrogen Strategy recognises that the low carbon hydrogen plays a critical role in achieving transition to net zero and sets a target of 5GW of low carbon hydrogen production capacity by 2030 for use across the economy... Read More about Scalable metamaterial thermally sprayed catalyst coatings for nuclear reactor high temperature solid oxide steam electrolysis..

Hydrogen and the energy transition. (2023)
Presentation / Conference
ALI, D. 2023. Hydrogen and the energy transition. Presented at the 2023 Glasgow Caledonia University (GCU) Capacity building Erasmus+ workshop, 12 July 2023, Sri Lanka.

To justify and know why we need to use Hydrogen the author detailed the emission briefs which showed the emissions from natural gas decreased by 118 Mt in 2022 due to Ukraine war, coal grew to a new all-time high of all-time high of almost 15.5 Gt. E... Read More about Hydrogen and the energy transition..

Monitoring corrosion under insulation utilising electrochemical testing. (2023)
Presentation / Conference
NEWLANDS, B., HORGAN, M. and MINSHULL, H. 2023. Monitoring corrosion under insulation utilising electrochemical testing. Presented at the 4th International conference on health monitoring of civil and maritime structures (HeaMES 2023), 12-13 June 2023, [virtual event].

This paper proposes a novel sensor-based instrumented monitoring system for the specific detection of corrosion at the CUI interface. Electrochemical Testing (ET), Electrochemical Impedance Spectroscopy (EIS), Scanning Electron Microscopy (SEM) and E... Read More about Monitoring corrosion under insulation utilising electrochemical testing..

Tracking and estimation of surgical tool pose based on the vision system for surgical robot. (2023)
Presentation / Conference
MUTHUKRISHNAN, R., KANNAN, S., ZHAO, Y. and PRABHU, R. 2023. Tracking and estimation of surgical tool pose based on the vision system for surgical robot. Presented at the 2nd MDMC (Medical device manufacturing centre) annual conference 2023, 31 May 2023, Dundee, UK.

The aim of this research is to customise a surgical robot. This research presents a Virtual Dynamic Tri-crossbar and a Virtual Stable Graph (VDT-VSG) which simplifies the task of tracing the needle angle and location.

Modelling, optimisation and analysis of tubular high temperature solid oxide steam electrolysis cell. (2023)
Presentation / Conference
KURUSHINA, V., SOMAN, A., RAJENDRAN, V., PRATHURU, A., HOSSAIN, M., AMINI HORRI, B., CAI, Q. and FAISAL, N. 2023. Modelling, optimisation and analysis of tubular high temperature solid oxide steam electrolysis cell. Presented at the 36th Scottish fluid mechanics meetings, 24 May 2023, Glasgow, UK.

High temperature solid oxide steam electrolysis (HTSOSE) is an efficient and ecologically-friendly method of hydrogen production through conversion of the water substance into hydrogen and oxygen, using the heat and electrical energy. The HT SOSE is... Read More about Modelling, optimisation and analysis of tubular high temperature solid oxide steam electrolysis cell..

Materials for molten salt facing parts: challenges and opportunities for nuclear thermochemical cycle electrolysis. (2023)
Presentation / Conference
FAISAL, N., RAJENDRAN, V., PRATHURU, A. and HOSSAIN, M. 2023. Materials for molten salt facing parts: challenges and opportunities for nuclear thermochemical cycle electrolysis. Presented at the 5th International conference on structural nano composites 2023 (NANOSTRUC 2023), 24-26 May 2023, Nicosia, Cyprus: [virtual event].

One of the important challenges is to develop coating materials for thermochemical containment vessels and pipes that encounters the highly corrosive and harsh environment produced by the molten salt at high temperature. The aim of this review is to... Read More about Materials for molten salt facing parts: challenges and opportunities for nuclear thermochemical cycle electrolysis..

Materials and meta-data for thermochemical electrolysis. (2023)
Presentation / Conference
RAJENDRAN, V., MUTHUKRISHNAN, R., BALOGUN, Y., KURUSHINA, V., PRATHURU, A., HOSSAIN, M. and FAISAL, N.H. 2023. Materials and meta-data for thermochemical electrolysis. Presented at the 2023 Scotland's hydrogen economy and the chemical sciences, 23 May 2023, St Andrews, UK.

One of the important challenges is to develop coating materials for thermochemical containment vessels and pipes that encounters the highly corrosive and harsh environment produced by the molten salt at high temperature. Overall assessment based on t... Read More about Materials and meta-data for thermochemical electrolysis..

Modelling real-world renewable hydrogen energy systems for enabling Scotland zero-carbon ambition. (2023)
Presentation / Conference
ATTEYA, A.I. and ALI, D. 2023. Modelling real-world renewable hydrogen energy systems for enabling Scotland zero-carbon ambition. Presented at the 2023 All-energy and dcarbonise conference, 10-11 May 2023, Glasgow, UK.

Hydrogen is described as one of the most indicative scenarios for meeting Scotland Net-Zero carbon ambition set out for 2045. According to the 2021 Scottish Government’s hydrogen policy statement, the target is to invest 5 GW of renewable and low-car... Read More about Modelling real-world renewable hydrogen energy systems for enabling Scotland zero-carbon ambition..

Modelling, optimisation and analysis of tubular high temperature solid oxide steam electrolysis cell. (2023)
Presentation / Conference
KURUSHINA, V., SOMAN, A., RAJENDRAN, V., PRATHURU, A., HOSSAIN, M., HORRI, B.A., CAI, Q. and FAISAL, N. 2023. Modelling, optimisation and analysis of tubular high temperature solid oxide steam electrolysis cell. Presented at the 2023 All-energy and dcarbonise conference, 10-11 May 2023, Glasgow, UK.

Developing electrolyser cells with enhanced hydrogen production and their scalable manufacturing can play an important role in enabling not only eco-friendly development but also cost-effective, reliable, and sustainable opportunities. Thermomechanic... Read More about Modelling, optimisation and analysis of tubular high temperature solid oxide steam electrolysis cell..

Structural design and analysis of a high temperature solid oxide steam tubular electrolyser. (2023)
Presentation / Conference
KURUSHINA, V., SOMAN, A., RAJENDRAN, V., PRATHURU, A., HOSSAIN, M., HORRI, B., CAI, Q. and FAISAL, N. 2023. Structural design and analysis of a high temperature solid oxide steam tubular electrolyser. Presented at the 2023 All things hydrogen conference (ATH23) [online], 14 March 2023, Aberdeen, UK. Available from: https://tinyurl.com/56ut5jjb

The hydrogen production is an active area of the innovation and development in the perspective of the next decade, with the relative dominance of the alkaline, proton exchange and solid oxide (SO) technology. The gradual maturity of the latter techno... Read More about Structural design and analysis of a high temperature solid oxide steam tubular electrolyser..

Scalable metamaterial thermally sprayed catalyst coatings for nuclear reactor high temperature solid oxide steam electrolysis. (2022)
Presentation / Conference
HOSSAIN, M., FAISAL, N., PRATHURU, A., KURUSHINA, V., CAI, Q., HORRI, B. and SOMAN, A. 2022. Scalable metamaterial thermally sprayed catalyst coatings for nuclear reactor high temperature solid oxide steam electrolysis. Presented at the 4th International conference on energy and power 2022 (ICEP2022), 11-13 December 2022, Dhaka, Bangledesh: [virtual conference].

The UK government in their 2021 Hydrogen Strategy recognises that the low carbon hydrogen plays a critical role in achieving transition to net zero and sets a target of 5GW of low carbon hydrogen production capacity by 2030 for use across the economy... Read More about Scalable metamaterial thermally sprayed catalyst coatings for nuclear reactor high temperature solid oxide steam electrolysis..

An evaluation of the morphological, microstructural and mechanical behaviour of the glass fibre/HDPE thermoplastic composite pipe. (2022)
Presentation / Conference
OKOLIE, O., NJUGUNA, J. and FAISAL, N. 2022. An evaluation of the morphological, microstructural and mechanical behaviour of the glass fibre/HDPE thermoplastic composite pipe. Presented at 2022 Scottish Research Partnership in Engineering 2022, 21 November 2022, Edinburgh, UK.

Composite pipes are increasingly being used as an alternative solution to conventional metal-based pipes. This development is in response to significant corrosion failures with the metallic pipes and enables better decision making especially for the... Read More about An evaluation of the morphological, microstructural and mechanical behaviour of the glass fibre/HDPE thermoplastic composite pipe..

The role of video aids in online teaching: engineering design as a case study. (2022)
Presentation / Conference
ABOLLE, J. and IYALLA, I. 2022. The role of video aids in online teaching: engineering design as a case study. Presented at the 2022 RGU annual learning and teaching conference (RGU LTC 2022): enhancing for impact, 21 October 2022, Aberdeen, UK.

The use of video aids has long been the subject of argument in pedagogic research (Hamel et al. 2019). With the recent shift from face-to-face to a more blended mode of teaching due to COVID, it is clear that video aids should be an inevitable part o... Read More about The role of video aids in online teaching: engineering design as a case study..

Weathering the storm. (2022)
Presentation / Conference
WORK, F. and the RGU INSTITUTIONAL RESILIENCE PROJECT GROUP. 2022. Weathering the storm. Presented at the 2022 RGU annual learning and teaching conference (RGU LTC 2022): enhancing for impact, 21 October 2022, Aberdeen, UK.

Resilient Learning Communities is the 2020-2023 sector-wide QAA Enhancement theme (QAA 2020), with a specific aim to improve the student learning experience. QAA Enhancement themes involve institutions, staff and students working together to share pr... Read More about Weathering the storm..

Developing a virtual engineering lab using ADDIE model. [Poster] (2022)
Presentation / Conference
AMISH, M. 2022. Developing a virtual engineering lab using ADDIE model. Presented at the 2022 RGU annual learning and teaching conference (RGU LTC 2022): enhancing for impact, 21 October 2022, Aberdeen, UK.

This poster describes a project in RGU's School of Engineering that aims to develop a complete learning management product that will aim to address the limitations of hands-on laboratories and meet students' growing expectation for seamless integrati... Read More about Developing a virtual engineering lab using ADDIE model. [Poster].

Developing a technology to design a collaborative online project-based learning model. (2022)
Presentation / Conference
AMISH, M. 2022. Developing a technology to design a collaborative online project-based learning model. Presented at the 2022 RGU annual learning and teaching conference (RGU LTC 2022): enhancing for impact, 21 October 2022, Aberdeen, UK.

This poster describes a project that aimed to develop technology that would support the design of collaborative online project-based learning within the RGU School of Engineering. Project-based learning is reported to help students develop soft skill... Read More about Developing a technology to design a collaborative online project-based learning model..