Skip to main content

Research Repository

Advanced Search

All Outputs (10)

FEM analysis to optimally design end mill cutters for milling of Ti-6Al-4V. (2014)
Journal Article
KUMAR, V., EAKAMBARAM, A. and ARIVAZHAGAN, A. 2014. FEM analysis to optimally design end mill cutters for milling of Ti-6Al-4 V. Procedia engineering [online], 97: proceedings of 12th Global congress on manufacturing and management 2014 (GCMM 2014), 8-10 December 2014, Vellore, India, pages 1237-1246. Available from: https://doi.org/10.1016/j.proeng.2014.12.402

This paper presents an FEM analysis conducted for optimally designing end mill cutters through verifying the cutting tool forces and stresses for milling Titanium alloy Ti-6Al-4 V. Initially, the theoretical tool forces are calculated by considering... Read More about FEM analysis to optimally design end mill cutters for milling of Ti-6Al-4V..

Natural convection flow and heat transfer in an enclosure containing staggered arrangement of blockages. (2014)
Journal Article
IYI, D. and HASAN, R. 2015. Natural convection flow and heat transfer in an enclosure containging staggered arragement of blockages. Procedia engineering [online], 105: proceedings of the 6th BSME international conference on thermal engineering (ICTE 2014), 19-21 December 2014, Dhaka, Bangladesh, pages 176-183. Available from: https://doi.org/10.1016/j.proeng.2015.05.033

The work reported in this paper is a numerical study of airflow and heat transfer for low turbulence buoyancy-driven flow in a rectangular cavity partially filled with solid objects. The two vertical walls were maintained at constant temperatures giv... Read More about Natural convection flow and heat transfer in an enclosure containing staggered arrangement of blockages..

Integrating rapid 3D data collection techniques to support BIM design decision making. (2014)
Journal Article
LAING, R., LEON, M., MAHDJOUBI, L. and SCOTT, J. 2014. Integrating rapid 3D data collection techniques to support BIM design decision making. Procedia environmental sciences [online], 22: proceedings of the 12th International conference on design and decision support systems in architecture and urban planning (DDSS 2014), 25-27 August 2014, Eindhoven, Netherlands, pages 120-130. Available from: https://doi.org/10.1016/j.proenv.2014.11.012

In recent years, there have been rapid developments in techniques available to capture three dimensional data with regards to the existing built environment. Such technologies support the collection of both large scale landscape and streetscape data,... Read More about Integrating rapid 3D data collection techniques to support BIM design decision making..

Development and testing of a design protocol for computer mediated multidisciplinary collaboration during the concept stages with application to the built environment. (2014)
Journal Article
LEON, M., LAING, R., MALINS, J., SALMAN, H. 2014. Development and testing of a design protocol for computer mediated multidisciplinary collaboration during the concept stages with application to the built environment. Procedia environmental sciences [online], 22: proceedings of the 12th International conference on design and decision support systems in architecture and urban planning (DDSS 2014), 25-27 August 2014, Eindhoven, Netherlands, pages 108-119. Available from: https://doi.org/10.1016/j.proenv.2014.11.011

Effective collaboration and maximum effort from stakeholders during the feasibility and concept design stages in architecture provide the greatest potential for added value for the overall success of a building project, from the initial design throug... Read More about Development and testing of a design protocol for computer mediated multidisciplinary collaboration during the concept stages with application to the built environment..

Hydrogen separation using silica-based composite membranes. (2014)
Journal Article
KAJAMA, M.N., NWOGU, N.C. and GOBINA, E. 2014. Hydrogen separation using silica-based composite membranes. Advanced materials research [online], 1051: selected papers from the 2014 international conference on green materials and environmental engineering (GMEE 2014), 21-22 September 2014, Hong Kong, China, pages 107-111. Available from: https://doi.org/10.4028/www.scientific.net/AMR.1051.107

Silica sol-gel membranes have been developed for moderate temperature (300°C) separation of hydrogen (H2) from nitrogen (N2), methane (CH4) and argon (Ar) gas molecules. Tubular ceramic support with 15 nm nominal pore diameter and 45% porosity was mo... Read More about Hydrogen separation using silica-based composite membranes..

Biodesalination: an emerging technology for targeted removal of Na+ and Cl− from seawater by cyanobacteria. (2014)
Journal Article
MINAS, K., KARUNAKARAN, E., BOND, T., GANDY, C., HONSBEIN, A., MADSEN, M., AMEZAGA, J., AMTMANN, A., TEMPLETON, M.R., BIGGS, C.A. and LAWTON, L. 2015. Biodesalination: an emerging technology for targeted removal of Na+ and Cl− from seawater by cyanobacteria. Desalination and water treatment [online], 55(10): selected papers presented at 2015 Desalination for the environment conference: clean water and energy, 11-15 May 2014, Limassol, Cyprus, pages 2647-2668. Available from: https://doi.org/10.1080/19443994.2014.940647

Although desalination by membrane processes is a possible solution to the problem of freshwater supply, related cost and energy demands prohibit its use on a global scale. Hence, there is an emerging necessity for alternative, energy and cost-efficie... Read More about Biodesalination: an emerging technology for targeted removal of Na+ and Cl− from seawater by cyanobacteria..

Staying in the zone: the cognitive components associated with offshore drillers' situation awareness. (2014)
Journal Article
ROBERTS, R.C., FLIN, R. and CLELAND, J. 2014. Staying in the zone: the cognitive components associated with offshore drillers' situation awareness. Proceedings of the human factors and ergonomics society annual meeting [online], 58(1): papers of the 58th Human Factors and Ergonomics Society annual meeting 2014 (HFES 2014), 27-31 October, 2014, San Diego, USA, pages 270-274. Available from: https://doi.org/10.1177/1541931214581056

Situation Awareness (SA) issues are often identified as contributing factors to drilling incidents, most recently in the Deepwater Horizon blowout. Two studies aimed to identify the cognitive components required for offshore drillers to develop and m... Read More about Staying in the zone: the cognitive components associated with offshore drillers' situation awareness..

The 2014 Scottish independence referendum: a study of voters' online information behaviour. (2014)
Journal Article
BAXTER, G. and MARCELLA, R. 2014. The 2014 Scottish independence referendum: a study of voters' online information behaviour. Information research [online], 19(4, Supplement): proceedings of the 2014 Information behaviour conference (ISIC 2014), 2-5 September 2014, Leeds, UK, paper number isicsp5. Available from: http://www.informationr.net/ir/19-4/isic/isicsp5.html

Introduction. The paper will present the preliminary results of a study of voters' online information behaviour being conducted during the 2014 Scottish independence referendum campaign. The referendum provides a rare opportunity to explore politicia... Read More about The 2014 Scottish independence referendum: a study of voters' online information behaviour..

Characterization of synthesized polyurethane/montmorillonite nanocomposites foams. (2014)
Journal Article
ANSARI, F., SACHSE, S., MICHALOWSKI, S., KAVOSH, M., PIELICHOWSKI, K. and NJUGUNA, J. 2014. Characterization of synthesized polyurethane/montmorillonite nanocomposite foams. IOP conference series: materials science and engineering [online], 64(1), Article 012039. Available from: https://doi.org/10.1088/1757-899X/64/1/012039

Nanophased hybrid composites based on polyurethane/montmorillonite (PU/MMT) have been fabricated. The nanocomposite which was formed by the addition of a polyol premix with 4,4′-diphenylmethane diisocyanate to obtain nanophased polyurethane foams whi... Read More about Characterization of synthesized polyurethane/montmorillonite nanocomposites foams..

Fuel consumption tabulation in laboratory conditions. (2014)
Journal Article
ALGHADHI, M., BALL, A., KOLLAR, L.E., MISHRA, R. and ASIM, T. 2014. Fuel consumption tabulation in laboratory conditions. International journal of recent development in engineering and technology [online], 2(Special issue 4): papers from 2014 International research conference on engineering, science and management (IRCESM 2014), 4-5 June 2014, Dubai, UAE, pages 29-38. Available from: https://www.ijrdet.com/files/IRCESM2014/IJRDET_IRCESM_05.pdf

This paper examines the fuel economy displayed by passenger vehicles and attempts to connect vehicular fuel consumption to such easily measurable parameters as vehicle speed, acceleration, gear and throttle position. The central contention is to unde... Read More about Fuel consumption tabulation in laboratory conditions..