All Outputs (88)

Validation of partial discharge emulator simulations using free-space radiometric measurements. (2016)
Conference Proceeding
JABER, A., LAZARIDIS, P., SAEED, B., ZHANG, Y., KHAN, U., UPTON, D., AHMED, H., MATHER, P., VIEIRA, M.F.Q., ATKINSON, R., JUDD, M. and GLOVER, I.A. 2016. Validation of partial discharge emulator simulations using free-space radiometric measurements. In Al-Shibaany, Z.Y.A. and Hameed, A.F. (eds.) Proceedings of 2016 International conference for students on applied engineering (ICSAE 2016), 20-21 October 2016, Newcastle Upon Tyne, UK. Piscataway: IEEE [online], pages 475-478. Available from: https://doi.org/10.1109/ICSAE.2016.7810238

A useful technique to estimate the degradation of insulation in high voltage (HV) installations is the measurement of partial discharge (PD). Free-space radiometric (FSR) detection of PD is a relatively new technique. Several types of PD emulator sou... Read More about Validation of partial discharge emulator simulations using free-space radiometric measurements..

Partial discharge detection using software defined radio. (2016)
Conference Proceeding
MOHAMED, H., LAZARIDIS, P., UPTON, D., KHAN, U., SAEED, B., JABER, A., ZHANG, Y., MATHER, P., VIEIRA, M.F.Q., BARLEE, K., ATKINSON, D.S.W. and GLOVER, I.A. 2016. Partial discharge detection using software defined radio. In Al-Shibaany, Z.Y.A. and Hameed, A.F. (eds.) Proceedings of 2016 International conference for students on applied engineering (ICSAE 2016), 20-21 October 2016, Newcastle Upon Tyne, UK. Piscataway: IEEE [online], pages 373-376. Available from: https://doi.org/10.1109/ICSAE.2016.7810220

Partial discharge (PD) is an electrical discharge that occurs within part of the dielectric separating two HV (High Voltage) conductors. PD causes damage to the dielectric which typically deteriorates with time. If left untreated, PD may result in ca... Read More about Partial discharge detection using software defined radio..

A framework for writing learning agreements. (2016)
Conference Proceeding
CLEAR, T., MCDERMOTT, R., PARSJÖ, E., CAJANDER, Å., DANIELS, M. and LAGERQVIST, N. 2016. A framework for writing learning agreements. In Proceedings of the Institute of Electrical and Electonic Engineers (IEEE) frontiers in education 2016 conference (FIE 2016): the crossroads of engineering and business, 12-15 October 2016, Erie, USA. Piscataway: IEEE [online], article ID 7757718. Available from: https://doi.org/10.1109/FIE.2016.7757718.

Active learning is a popular concept for motivating learning. Learning agreements are one strategy towards this goal. They can be used to aid the students to take ownership of their learning and in becoming more active in a course. Learning Agreement... Read More about A framework for writing learning agreements..

Aligning quality assurance at the course unit and educational program levels. (2016)
Conference Proceeding
JONSSON, B.T., LAUSDOTTIR, M.K., DANIELS, M., CLEAR, A. and MCDERMOTT, R. 2016. Aligning quality assurance at the course unit and educational program levels. In Proceedings of the Institute of Electrical and Electonic Engineers (IEEE) frontiers in education 2016 conference (FIE 2016): the crossroads of engineering and business, 12-15 October 2016, Erie, USA. Piscataway: IEEE [online], article ID 7757419. Available from: https://doi.org/10.1109/FIE.2016.7757419.

Quality assurance is a subject that has grown dramatically in importance in recent times. In previous work, we have described how the ACM Curricula can be used to support the Quality Assurance process of educational programs, using the Computer Scien... Read More about Aligning quality assurance at the course unit and educational program levels..

Students envisioning the future. (2016)
Conference Proceeding
LIND, T., CAJANDER, Å., SANDBLAD, B., DANIELS, M., LÁRUSDÓTTIR, M., MCDERMOTT, R. and CLEAR, T. 2016. Students envisioning the future. In Proceedings of the Institute of Electrical and Electonic Engineers (IEEE) frontiers in education 2016 conference (FIE 2016): the crossroads of engineering and business, 12-15 October 2016, Erie, USA. Piscataway: IEEE [online], article ID 7757701. Available from: https://doi.org/10.1109/FIE.2016.7757701.

How can students be included as critical stakeholders in the systems and services provided by a university? To address the whole student experience, we engaged students and employees at a large Swedish university in a vision seminar process to elicit... Read More about Students envisioning the future..

A qualitative study verifying the research constructs relating to CRM systems benefits and consumer buying behavior variables. (2016)
Conference Proceeding
OMOGE, A.P. and LAING, A. 2016. A qualitative study verifying the research constructs relating to CRM systems benefits and consumer buying behavior variables. In Proceedings of the 2016 West East Institute (WEI) international academic conference, 1-3 August 2016, Boston, USA. West Chester, PA: WEI [online]. Available from: /https://www.westeastinstitute.com/wp-content/uploads/2016/09/Akinyemi-Paul-Omoge-Audrey-Laing.pdf

This study presents the findings from the first phase of a mixed methods study. Following a review of relevant literature, this study has identified variables that have been claimed and rationalized to specifically imply CRM benefits and consumer buy... Read More about A qualitative study verifying the research constructs relating to CRM systems benefits and consumer buying behavior variables..

Selective dropout for deep neural networks. (2016)
Conference Proceeding
BARROW, E., EASTWOOD, M. and JAYNE, C. 2016. Selective dropout for deep neural networks. In Hirose, A., Ozawa, S., Doya, K., Ikeda, K., Lee, M. and Liu, D. (eds.) Neural information processing: Proceedings of the 23rd International conference on neural information processing (ICONIP 2016), 16-21 October 2016, Kyoto, Japan. Lecture notes in computer science, 9949. Cham: Springer [online], pages 519-528. Available from: https://doi.org/10.1007/978-3-319-46675-0_57

Dropout has been proven to be an effective method for reducing overfitting in deep artificial neural networks. We present 3 new alternative methods for performing dropout on a deep neural network which improves the effectiveness of the dropout method... Read More about Selective dropout for deep neural networks..

A novel modified SFTA approach for feature extraction. (2016)
Conference Proceeding
HASAN, M.J., UDDIN, J. and PINKU, S.N. 2016. A novel modified SFIA approach for feature extraction. In Proceedings of 3rd International conference on electrical engineering and information and communication technology 2016 (iCEEiCT 2016), 22-24 September 2016, Dhaka, Bangladesh. Piscataway: IEEE [online], article 7873115. Available from: https://doi.org/10.1109/CEEICT.2016.7873115

To increase the efficiency of conventional Segmentation Based Fractal Texture Analysis (SFTA), we propose a new approach on SFTA algorithm. We use an optimum multilevel thresholding hybrid method of Genetic Algorithm (GA) and Particle Swarm Optimizat... Read More about A novel modified SFTA approach for feature extraction..

A techno-economic comparison of biomass thermo-chemical systems for sustainable electricity in Nigerian rural areas. (2016)
Conference Proceeding
GARBA, A. and KISHK, M. 2016. A techno-economic comparison of biomass thermo-chemical systems for sustainable electricity in Nigerian rural areas. In Proceedings of the 5th Institution of Engineering and Technology (IET) International renewable power generation conference (RPG 2016), 21-23 September 2016, London, UK. New York: IET [online], article ID 558. Available from: https://doi.org/10.1049/cp.2016.0558.

Biomass thermo-chemical systems (BTCS) source remains one of the means of providing sustainable electricity to rural areas in developing nations. Due the dwindling power generation and supply in Nigeria representing between 10 and 34%, the rural comm... Read More about A techno-economic comparison of biomass thermo-chemical systems for sustainable electricity in Nigerian rural areas..

Design economics for dual currency management in construction projects. (2016)
Conference Proceeding
VICTORIA, M., PERERA, S. and DAVIES, A. 2016. Design economics for dual currency management in construction projects. In Proceedings of the 2016 Royal Institution of Chartered Surveyors construction, building and real estate research conference (RICS COBRA 2016), 20-22 September 2016, Toronto, Canada. London: RICS.

This paper reviews the literature on design economics and deduce relationships between Capital Cost (CC) and design variables; and initial Embodied Carbon (EC) and design variables by collecting data of 10 office buildings in the UK. Design variables... Read More about Design economics for dual currency management in construction projects..

Construction cost and commercial management system in the UK and China: professional body and business comparison. (2016)
Conference Proceeding
PERERA, S., ZHOU, L. and VICTORIA, M. 2016. Construction cost and commercial management system in the UK and China: professional body and business comparison. In Proceedings of the 2016 Royal Institution of Chartered Surveyors construction, building and real estate research conference (RICS COBRA 2016), 20-22 September 2016, Toronto, Canada. London: RICS.

This paper looks at the construction cost and commercial management system comparisons in UK and China. Cost and commercial management processes and practices in different parts of the world vary significantly. UK-China cooperation agreements foster... Read More about Construction cost and commercial management system in the UK and China: professional body and business comparison..

The application of 3D visualisation and HD surveying to help stimulate economic growth in historic urban areas. (2016)
Conference Proceeding
LAING, R., TAIT, E., ISAACS, J., LEON, M. and REID, P. 2016. The application of 3D visualisation and HD surveying to help stimulate economic growth in historic urban areas. In Proceedings of the 2016 RICS construction, building and real estate research conference (COBRA 2016), 20-22 September 2016, Toronto, Canada. London: RICS.

This paper concerns the application of cutting edge digital recording techniques within the context of heritage-led urban regeneration. The work is innovative in that it supports the belief of decision makers and local stakeholders that there is pote... Read More about The application of 3D visualisation and HD surveying to help stimulate economic growth in historic urban areas..

Abstract book for the proceedings of the 3rd International conference on structural nano composites (NANOSTRUC 2016), 12-15 September 2016, Aberdeen, UK. (2016)
Conference Proceeding
STAROST, K. and NJUGUNA, J. (eds.) 2016. Abstract book for the proceedings of the 3rd International conference on structural nano composites (NANOSTRUC 2016), 12-15 September 2016, Aberdeen, UK. Berlin: Nanostruc [online]. Available from: https://web.archive.org/web/20180123120946/http://www.nanostruc.info/nanostruc-conference.html

The theme of the 3rd NANOSTRUC 2016 conference is on ‘Nanoscience and Nanotechnologies – Recent Advances towards Nanoproducts and Applications’. The conference is aimed to promote activities in various areas on materials and structures by providing a... Read More about Abstract book for the proceedings of the 3rd International conference on structural nano composites (NANOSTRUC 2016), 12-15 September 2016, Aberdeen, UK..

Semi-automatic pose estimation of a fleet of robots with embedded stereoscopic cameras. (2016)
Conference Proceeding
CORTÉS, X., SERRATOSA, F. and MORENO-GARCIA, C.-F. 2016. Semi-automatic pose estimation of a fleet of robots with embedded stereoscopic cameras. In Proceedings of 21st Institute of Electrical Electronic Engineers (IEEE) Emerging technologies and factory automation international conference 2016 (ETFA 2016), 6-9 September 2016, Berlin, Germany. Piscataway: IEEE [online], article ID 7733640. Available from: https://doi.org/10.1109/ETFA.2016.7733640

Given a fleet of robots, automatic estimation of the relative poses between them could be inaccurate in specific environments. We propose a framework composed by the fleet of robots with embedded stereoscopic cameras providing 2D and 3D images of the... Read More about Semi-automatic pose estimation of a fleet of robots with embedded stereoscopic cameras..

Comparative study of partial discharge emulators for the calibration of free-space radiometric measurements. (2016)
Conference Proceeding
JABER, A., LAZARIDIS, P., SAEED, B., ZHANG, Y., KHAN, U., UPTON, D., AHMED, H., MATHER, P., VIEIRA, M.F.Q., ATKINSON, R., JUDD, M. and GLOVER, I.A. 2016. Comparative study of partial discharge emulators for the calibration of free-space radiometric measurements. In Xu, Z. and Wang, J. Proceedings of 22nd International conference on automation and computing 2016 (ICAC 2016): tackling the new challenges in automation and computing, 7-8 September 2016, Colchester, UK. Piscataway: IEEE [online], article ID 7604938, pages 313-316. Available from: https://doi.org/10.1109/iconac.2016.7604938

Partial discharge is measured simultaneously using free-space radiometry (FSR) and a galvanic contact measurement technique based on the IEC 60270 standard. Several types of PD (Partial Discharge) sources are specially constructed: two internal PD em... Read More about Comparative study of partial discharge emulators for the calibration of free-space radiometric measurements..

Crossing over, into and back: design disciplines and identities. (2016)
Conference Proceeding
FAIRBURN, S., HEELEY, R. and PENGELLY, J. 2016. Crossing over, into and back: design disciplines and identities. In Proceedings of the 18th International conference on engineering and product design education (E&PDE16): design education; collaboration and cross-disciplinarity, 8-9 September 2016, Aalborg, Denmark. Glasgow: The Design Society/Institution of Engineering Designers [online], pages 590-595. Available from: https://www.designsociety.org/publication/39129/crossing_over_into_and_back_design_disciplines_and_identities

Increasingly design education is taking place within a Krauss-ion 'expanded field' of cross disciplinary practice. This explorative nature of design, when set against notions of traditional disciplines, will ask graduates to participate with certaint... Read More about Crossing over, into and back: design disciplines and identities..

An overview of emotional intelligence research in construction project management: methodological concerns. (2016)
Conference Proceeding
LAWANI, A. 2016. An overview of emotional intelligence research in construction project management: methodological concerns. In Chan, P.W. and Neilson, C.J. (eds.) Proceedings of 32nd annual ARCOM (Association of Researchers in Construction Management) conference 2016 (ARCOM 2016), 5-7 September 2016, Manchester, UK. Manchester: ARCOM [online], 2, pages 639-648. Available from: http://www.arcom.ac.uk/-docs/proceedings/19b9891a3cdbd208208fae1aec27cd58.pdf

The aim of this paper is to present an overview of previous studies on Emotional Intelligence (EI) in construction project management. The literature was surveyed to identify and describe the characteristics of previous studies of EI in the construct... Read More about An overview of emotional intelligence research in construction project management: methodological concerns..

Acoustic emission testing of composite-to-metal and metal-to-metal adhesive bond strengths. (2016)
Conference Proceeding
DROUBI, M.G., FAISAL, N.H., STUART, A., MOWAT, J., NOBEL, C. and EL-SHAIB, M.N. 2016. Acoustic emission testing of composite-to-metal and metal-to-metal adhesive bond strengths. In Proceedings of the 32nd European conference on acoustic emission testing (EWGAE 2016), 7-9 September 2016, Prague, Czech Republic. Bad Breisig: NDT.net [online], pages 95-104. Available from: http://www.ndt.net/article/ewgae2016/papers/95_paper.pdf

Composite sandwich structures consisting of two layers with an adhesive contacting interface are of importance in a number of industrial applications such as aerospace, marine and automotive. This research therefore aims to characterise the failure b... Read More about Acoustic emission testing of composite-to-metal and metal-to-metal adhesive bond strengths..

Development of a self-propelled capsule robot for pipeline inspection. (2016)
Conference Proceeding
YUSUPOV, A. and LIU, Y. 2016. Development of a self-propelled capsule robot for pipeline inspection. In Xu, Z. and Wang, J. (eds.) Tackling the new challenges in automation and computing: proceedings of the 22nd International conference on automation and computing (ICAC 2016), 7-8 September 2016, Colchester, UK. Piscataway: IEEE [online], pages 84-88. Available from: https://doi.org/10.1109/IConAC.2016.7604899.

This paper introduces a current research project carried out in the Robert Gordon University for developing the prototype of the vibro-impact capsule robot for pipeline inspection. The project aims to address the technical bottlenecks which have been... Read More about Development of a self-propelled capsule robot for pipeline inspection..

The direction of reflection: helping students make sense of work placements. (2016)
Conference Proceeding
FULFORD, H. and CARGILL, E. 2016. The direction of reflection: helping students make sense of work placements. In Siva-Jothy, D. (ed.) Proceedings of the 23rd ASET annual conference: placement and employability professionals, 6-8 September 2016, York, UK. Sheffield: ASET [online], pages 84-92. Available from: http://www.asetonline.org/wp-content/uploads/2016/11/2016-ASET-Conference-Proceedings.pdf

When students are asked to write an account reflecting on a work placement or internship, they have the opportunity to consider their period of work experience from a number of perspectives. For example, they could concentrate on the skills they deve... Read More about The direction of reflection: helping students make sense of work placements..