Browse

A supervisory system for partial discharge monitoring. (2018)
Presentation / Conference
SAEED, B.I., UPTON, D.W., VIEIRA, M.F.Q., TORRES, F., MOHAMED, H., MISTRY, K., MATHER, P.J., LAZARIDIS, P., KHAN, U., TACHTATZIS, C., ATKINSON, R., JUDD, M. and GLOVER, I.A. 2018. A supervisory system for partial discharge monitoring. In Proceedings of the 2nd Union radio-scientifique internationale (URSI) Atlantic radio science conference (AT-RASC) (URSI AT-RASC 2018)[online], 28 May - 1 June 2018, Gran Canaria, Spain. Gran Canaria: URSI [online}, paper ID CO2-01. Available from: http://www.ursi.org/proceedings/procAT18/papers/KPDWSNProjectProjectPapersandPresentationsPendingPublicationPID5208027.pdf

Continuous measurement of partial discharge plays a vital role in monitoring the status of high voltage equipment in electricity substations. This requires a comprehensive supervisory system to detect, monitor, collect and locate partial discharge ac... Read More about A supervisory system for partial discharge monitoring..

Mechanical, thermal, and flammability behaviour of low density polyethylene - oil based mud fillers nanocomposites. (2018)
Presentation / Conference
SIDDIQUE, S., SMITH, G.D., YATES, K. and NJUGUNA, J. 2018. Mechanical, thermal, and flammability behaviour of low density polyethylene - oil based mud fillers nanocomposites. Presented at the 4th International conference on structural nano composites (NANOSTRUC 2018), 23-24 May 2018, Berlin, Germany.

Novel low density polyethylene (LDPE)/Oil based mud fillers (OBMF) nanocomposites were manufactured by a melt compounding process. Fourier Transform Infrared (FTIR) Spectroscopy was used to characterise the structure of the nanocomposites. The result... Read More about Mechanical, thermal, and flammability behaviour of low density polyethylene - oil based mud fillers nanocomposites..

Abstract book for the proceedings of the 4th International conference on structural nano composites (NANOSTRUC 2018), 23-24 May 2018, Berlin, Germany. (2018)
Conference Proceeding
NJUGUNA, J. and NGO, H.-D. (eds.) 2018. Abstract book for the proceedings of the 4th International conference on structural nano composites (NANOSTRUC 2018), 23-24 May 2018, Berlin, Germany [online]. Available from: https://www.nanostruc.info/nanostruc-conference.html

The purpose of The 4th International Conference on Structural Nano Composites (NANOSTRUC2018) is to promote activities in various areas of materials and structures by providing a forum for exchange of ideas, presentation of technical achievements and... Read More about Abstract book for the proceedings of the 4th International conference on structural nano composites (NANOSTRUC 2018), 23-24 May 2018, Berlin, Germany..

Neutron diffraction residual stress measurements in suspension HVOF sprayed Al2O3 and YSZ coatings. (2018)
Conference Proceeding
OWOSENI, T., BAI, M., HUSSAIN, T., FAISAL, N.H., LEE, T.L. and KELLEHER, J. 2019. Neutron diffraction residual stress measurements in suspension HVOF sprayed Al2O3 and YSZ coatings. In Azarmi, F., Balani, K., Eden, T., Hussain, T., Li, H., Shinoda, K. and Toma, F.-L. (eds.) Proceedings of the 2018 International thermal spray conference (ITSC 2018), 7-10 May 2018, Orlando, USA. Ohio: ASM International [online], pages 490-495. Available from: http://www.proceedings.com/47648.html

Thermally sprayed coatings have residual stresses due to the processing techniques where the particles go through thermal softening/melting, high velocity impact and rapid solidification. The nature and magnitude of residual stresses in these coating... Read More about Neutron diffraction residual stress measurements in suspension HVOF sprayed Al2O3 and YSZ coatings..

Analysis of acoustic emission propagation in metal-to-metal adhesively-bonded joints. (2018)
Journal Article
CRAWFORD, A., DROUBI, M.G. and FAISAL, N.H. 2018. Analysis of acoustic emission propagation in metal-to-metal adhesively-bonded joints. Journal of nondestructive evaluation [online], 37(2), article number 33. Available from: https://doi.org/10.1007/s10921-018-0488-y

Acoustic emission (AE) monitoring shows promise as one of the most effective methods for condition monitoring of adhesively-bonded joints. Previous research has demonstrated its ability to detect, locate and classify adhesive joint failure, though in... Read More about Analysis of acoustic emission propagation in metal-to-metal adhesively-bonded joints..

Optimization and experimental verification of the vibro-impact capsule system in fluid pipeline. (2018)
Journal Article
YAN, Y., LIU, Y., JIANG, H., PENG, Z., CRAWFORD, A., WILLIAMSON, J., THOMPSON, J., KERINS, G., YUSUPOV, A. and ISLAM, S. 2019. Optimization and experimental verification of the vibro-impact capsule system in fluid pipeline. Proceedings of the Institution of Mechanical Engineers, part C: journal of mechanical engineering science [online], 233(3), pages 880-894. Available from: https://doi.org/10.1177/0954406218766200

This paper studies the prototype development of the vibro-impact capsule system aiming for autonomous mobile sensing for pipeline inspection. Self-propelled progression of the system is obtained by employing a vibro-impact oscillator encapsuled in th... Read More about Optimization and experimental verification of the vibro-impact capsule system in fluid pipeline..

Preparation, characterization and carrier gas transport characteristics of inorganic and organic membranes for application in lactic acid esterification with ethanol. (2018)
Thesis
OKON, E.P. 2018. Preparation, characterization and carrier gas transport characteristics of inorganic and organic membranes for application in lactic acid esterification with ethanol. Robert Gordon University, PhD thesis.

Ethyl lactate (EL) plays a major role as green solvent and also a replacement for most petrochemical solvents. The esterification process of lactic acid and ethanol to produce EL is an equilibrium-limiting reaction and the selective removal of one of... Read More about Preparation, characterization and carrier gas transport characteristics of inorganic and organic membranes for application in lactic acid esterification with ethanol..

Optimization of indentification of particle impacts using acoustic emission. (2018)
Thesis
HEDAYETULLAH, A.M. 2018. Optimization of indentification of particle impacts using acoustic emission. Robert Gordon University, PhD thesis.

Air-borne or liquid-laden solid particle transport is a common phenomenon in various industrial applications. Solid particles transported at severe operating conditions such as high-flow velocity can cause concerns for structural integrity, through w... Read More about Optimization of indentification of particle impacts using acoustic emission..

A review of optical concentrators for portable solar photovoltaic systems for developing countries. (2018)
Journal Article
FREIER, D., RAMIREZ-INIGUEZ, R., JAFRY, T., MUHAMMAD-SUKKI, F. and GAMIO, C. 2018. A review of optical concentrators for portable solar photovoltaic systems for developing countries. Renewable and sustainable energy reviews [online], 90, pages 957-968. Available from: https://doi.org/10.1016/j.rser.2018.03.039

Worldwide, over 1.1 billion people have no access to electricity. The consequences for the affected people include health hazards from fuels used for lighting, limits to learning when it gets dark, a short productive day and high expenditures on ligh... Read More about A review of optical concentrators for portable solar photovoltaic systems for developing countries..

Neutron scattering of porous rocks subjected to uniaxial compression in cryogenic conditions for offshore drilling operations in Arctic. [Dataset] (2018)
Dataset
FAISAL, N., SANAEE, R., LEE, T.L., MCLAUGHLIN, A. and SINGH, R.M. 2018. Neutron scattering of porous rocks subjected to uniaxial compression in cryogenic conditions for offshore drilling operations in Arctic. [Dataset]. Hosted on STFC ISIS neutron and muon source data journal [online]. Available from: https://doi.org/10.5286/ISIS.E.92924528

In August 2015, the oil and gas company (Royal Dutch Shell plc) were granted the final permit it needs to begin drilling below the ocean floor for oil in the Arctic. They have been allowed to drill just the top sections of two wells, off the coast of... Read More about Neutron scattering of porous rocks subjected to uniaxial compression in cryogenic conditions for offshore drilling operations in Arctic. [Dataset].

Collision avoidance effects on the mobility of a UAV swarm using chaotic ant colony with model predictive control. (2018)
Journal Article
DENTLER, J., ROSALIE, M., DANOY, G., BOUVRY, P., KANNAN, S., OLIVARES-MENDEZ, M.A. and VOOS, H. 2019. Collision avoidance effects on the mobility of a UAV swarm using chaotic ant colony with model predictive control. Journal of intelligent and robotic systems [online], 93(1-2), pages 227-243. Available from: https://doi.org/10.1007/s10846-018-0822-8

The recent development of compact and economic small Unmanned Aerial Vehicles (UAVs) permits the development of new UAV swarm applications. In order to enhance the area coverage of such UAV swarms, a novel mobility model has been presented in previou... Read More about Collision avoidance effects on the mobility of a UAV swarm using chaotic ant colony with model predictive control..

Development of a novel characterisation methodology for the aerodynamic coefficients of a tractor–trailer unit based on relative flow angles and vehicle dimensions. (2018)
Journal Article
MALVIYA, V., ASIM, T., SENDANAYAKE, I. and MISHRA, R. 2018. Development of a novel characterisation methodology for the aerodynamic coefficients of a tractor–trailer unit based on relative flow angles and vehicle dimensions. Arabian journal for science and technology [online], 43(9), pages 4957-4978. Available from: https://doi.org/10.1007/s13369-018-3185-3

Tractor–trailer units are integral part of the heavy commercial vehicle industry, used globally for goods transportation. Manufacturers have been trying to design aerodynamically efficient tractor–trailer units to reduce ever increasing fuel costs. I... Read More about Development of a novel characterisation methodology for the aerodynamic coefficients of a tractor–trailer unit based on relative flow angles and vehicle dimensions..

Design of solar powered charging backpack. (2018)
Journal Article
TAVERNE, J., MUHAMMAD-SUKKI, F., AYUB, A.S., SELLAMI, N., ABU-BAKAR, S.H., BANI, N.A., MAS'UD, A.A. and IYI, D. 2018. Design of solar powered charging backpack. International journal of power electronics and drive systems [online], 9(2), pages 848-858. Available from: https://doi.org/10.11591/ijpeds.v9n2.pp848-858

This paper demonstrated a step by step process in designing a solar powered charging backpack that is capable of charging a mobile phone efficiently. A selection of existing products available on the market were reviewed and compared to ascertain the... Read More about Design of solar powered charging backpack..

A comparison of inductive sensors in the characterization of partial discharges and electrical noise using the chromatic technique. (2018)
Journal Article
ARDILA-REY, J.A., MONTANA, J., DE CASTRO, B.A., SCHURCH, R., ULSON, J.A.C., MUHAMMAD-SUKKI, F. and BANI, N.A. 2018. A comparison of inductive sensors in the characterization of partial discharges and electrical noise using the chromatic technique. Sensors [online], 18(4), article number 1021. Available from: https://doi.org/10.3390/s18041021

Partial discharges (PDs) are one of the most important classes of ageing processes that occur within electrical insulation. PD detection is a standardized technique to qualify the state of the insulation in electric assets such as machines and power... Read More about A comparison of inductive sensors in the characterization of partial discharges and electrical noise using the chromatic technique..

Polymeric materials for conversion of electromagnetic waves from the sun to electric power. (2018)
Journal Article
HAQUE, S.M., ARDILA-REY, J.A., UMAR, Y., RAHMAN, H., MAS'UD, A.A., MUHAMMAD-SUKKI, F. and ALBARRACIN, R. 2018. Polymeric materials for conversion of electromagnetic waves from the sun to electric power. Polymers [online], 10(3), article number 307. Available from: https://doi.org/10.3390/polym10030307

Solar photoelectric energy converted into electricity requires large surface areas with incident light and flexible materials to capture these light emissions. Currently, sunlight rays are converted to electrical energy using silicon polymeric materi... Read More about Polymeric materials for conversion of electromagnetic waves from the sun to electric power..

Model predictive cooperative localization control of multiple UAVs using potential function sensor constraints: a workflow to create sensor constraint based potential functions for the control of cooperative localization scenarios with mobile robots. (2018)
Journal Article
DENTLER, J., KANNAN, S., BEZZAOUCHA, S., OLIVARES-MENDEZ, M.A. and VOOS, H. 2019. Model predictive cooperative localization control of multiple UAVs using potential function sensor constraints: a workflow to create sensor constraint based potential functions for the control of cooperative localization scenarios with mobile robots. Autonomous robots [online], 43(1), pages 153-178. Available from: https://doi.org/10.1007/s10514-018-9711-z

The global localization of multiple mobile robots can be achieved cost efficiently by localizing one robot globally and the others in relation to it using local sensor data. However, the drawback of this cooperative localization is the requirement of... Read More about Model predictive cooperative localization control of multiple UAVs using potential function sensor constraints: a workflow to create sensor constraint based potential functions for the control of cooperative localization scenarios with mobile robots..

Annual prediction output of an RADTIRC-PV module. (2018)
Journal Article
FREIER, D., MUHAMMAD-SUKKI, F., ABU-BAKAR, S.H., RAMIREZ-INIGUEZ, R., MUNIR, A.B., YASIN, S.H.M., BANI, N.A., MAS'UD, A.A., ARDILA-REY, J.A. and KARIM, M.E. 2018. Annual prediction output of an RADTIRC-PV module. Energies [online], 11(3), article number 544. Available from: http://www.mdpi.com/1996-1073/11/3/544

The number of solar photovoltaic (PV) installations has been increasing worldwide but the high capital cost of installation continues to be the main challenge, particularly in many developing countries. The solar concentrator, a device that focuses t... Read More about Annual prediction output of an RADTIRC-PV module..

External lightning protection system for wind turbine blades - power performance. (2018)
Journal Article
AYUB, A.S., SIEW, W.H. and STICKLAND, M. 2018. External lighting protection system for wind turbine blades - power performance. CIGRE science and engineering [online], 10, pages 88-94 Available from: https://e-cigre.org/publication/CSE010-cse-010

Previous studies conducted by the authors on the aerodynamic performance of turbine blades have shown unfavourable effects of externally mounted lightning down conductors. Owing to this, one could ask whether or not externally mounted lightning down... Read More about External lightning protection system for wind turbine blades - power performance..

Effect of electron beam irradiation on structural and optical properties of Cu-doped In2O3 films prepared by RF magnetron sputtering. (2018)
Journal Article
KRISHNAN, R.R., SANJEEV, G., PRABHU, R. and PILLAI, V.P.M. 2018. Effect of electron beam irradiation on structural and optical properties of Cu-doped In2O3 films prepared by RF magnetron sputtering. JOM: journal of the Minerals, Metals and Materials Society [online], 70(5), pages 739-746. Available from: https://doi.org/10.1007/s11837-018-2776-5

Undoped and Cu-doped In2O3 films were prepared by radiofrequency magnetron sputtering technique. The effects of Cu doping and high-energy electron beam irradiation on the structural and optical properties of as-prepared films were investigated using... Read More about Effect of electron beam irradiation on structural and optical properties of Cu-doped In2O3 films prepared by RF magnetron sputtering..

Cross sensitivity analysis of optical fibre-based sensing for high pressure, high temperature measurement in oil and gas applications. (2018)
Thesis
AMOS, S.U. 2018. Cross sensitivity analysis of optical fibre-based sensing for high pressure, high temperature measurement in oil and gas applications. Robert Gordon University, PhD thesis.

Measurements of physical parameters like pressure, temperature, flow rate, vibrations and displacement in harsh environment are often desired in the oil and gas industry. Pressure and temperature are the most important parameters among them. Changes... Read More about Cross sensitivity analysis of optical fibre-based sensing for high pressure, high temperature measurement in oil and gas applications..