Browse

Insulating MgO–Al2O3–LDPE nanocomposites for offshore medium-voltage DC cables. (2020)
Journal Article
GUPTA, R., SMITH, L., NJUGUNA, J., DEIGHTON, A. and PANCHOLI, K. 2020. Insulating MgO–Al2O3–LDPE nanocomposites for offshore medium-voltage DC cables. ACS applied electronic materials [online], 2(7), pages 1880-1891. Available from: https://doi.org/10.1021/acsaelm.0c00052

A polymer–metal oxide nanocomposite is a key in developing a high-temperature insulation material for power electronics and high-voltage direct current (HVDC) and medium-voltage direct current (MVDC) subsea cables having the capability of transmittin... Read More about Insulating MgO–Al2O3–LDPE nanocomposites for offshore medium-voltage DC cables..

Effect of fracture roughness on the hydrodynamics of proppant transport in hydraulic fractures. (2020)
Journal Article
SURI, Y. ISLAM, S.Z. and HOSSAIN, M. 2020. Effect of fracture roughness on the hydrodynamics of proppant transport in hydraulic fractures. Journal of natural gas science and engineering [online], 80, article ID 103401. Available from: https://doi.org/10.1016/j.jngse.2020.103401

The effect of fracture roughness is investigated on proppant transport in hydraulic fractures using Joint Roughness Coefficient and a three-dimensional multiphase modelling approach. The equations governing the proppant transport physics in the fract... Read More about Effect of fracture roughness on the hydrodynamics of proppant transport in hydraulic fractures..

The influence of graphene oxide on nanoparticle emissions during drilling of graphene/epoxy carbon-fiber reinforced engineered nanomaterials. (2020)
Journal Article
STAROST, K. and NJUGUNA, J. 2020. The influence of graphene oxide on nanoparticle emissions during drilling of graphene/epoxy carbon-fiber reinforced engineered nanomaterials. Atmosphere [online], 11(6), article number 573. Available from: https://doi.org/10.3390/atmos11060573

Graphene oxide (GO) nanoparticles are increasingly being used to tailor industrial composites. However, despite the advantages, GO has shown conceivable health risks and toxicity to humans and the environment if released. This study investigates the... Read More about The influence of graphene oxide on nanoparticle emissions during drilling of graphene/epoxy carbon-fiber reinforced engineered nanomaterials..

Proppant transport in dynamically propagating hydraulic fractures using CFD-XFEM approach. [Dataset] (2020)
Dataset
ISLAM, S., HOSSAIN, M. and SURI, Y. 2020. Proppant transport in dynamically propagating hydraulic fractures using CFD-XFEM approach. [Dataset]. Hosted on Mendeley Data [online]. Available from: https://doi.org/10.17632/sdzxzd9krm.1

The aim of this research was to find a dynamic and integrated numerical model that uses computational fluid dynamics (CFD) technique to model the fluid flow with proppant transport and Extended finite element method (XFEM) to model the fracture propa... Read More about Proppant transport in dynamically propagating hydraulic fractures using CFD-XFEM approach. [Dataset].

Renewable energy performance of the green buildings: key-enabler on useful consumption yield. (2020)
Journal Article
AMRAN, M.E., MUHTAZARUDDIN, M.N., KAMARUDDIN, S.A., MUHAMMAD-SUKKI, F., ABU-BAKAR, S.H., AYUB, A.S., BANI, N.A., SAUDI, A.S.M. and ARDILA-REY, J.A. 2020. Renewable energy performance of the green buildings: key-enabler on useful consumption yield. IEEE access [online], 8, pages 95747- 95767. Available from: https://doi.org/10.1109/ACCESS.2020.2996573

Malaysia’s Eleventh Plan started to encourage green building developments and green industries to stimulate green growth. Eventually, the Malaysian government had launched a new commitment to accelerate the green and efficient energy sector and revis... Read More about Renewable energy performance of the green buildings: key-enabler on useful consumption yield..

Proppant transport in dynamically propagating hydraulic fractures using CFD-XFEM approach. (2020)
Journal Article
SURI, Y., ISLAM, S.Z. and HOSSAIN, M. 2020. Proppant transport in dynamically propagating hydraulic fractures using CFD-XFEM approach. International journal of rock mechanics and mining sciences [online], 131, article ID 104356. Available from: https://doi.org/10.1016/j.ijrmms.2020.104356

Numerically modelling the fluid flow with proppant transport and fracture propagation together are one of the significant technical challenges in hydraulic fracturing of unconventional hydrocarbon reservoirs. The existing models either model the prop... Read More about Proppant transport in dynamically propagating hydraulic fractures using CFD-XFEM approach..

Microwave irradiation synthesis and characterization of reduced-(graphene oxide-(polystyrene-polymethyl methacrylate))/silver nanoparticle nanocomposites and their anti-microbial activity. (2020)
Journal Article
ALDOASRI, M.A., ALSAUD, K.B.B., OTHMAN, A., AL-HINDAWI, M., FAISAL, N.H., AHMED, R., MICHAEL, F.M., KRISHNAN, M.R. and ALSHARAEH, E. 2020. Microwave irradiation synthesis and characterization of reduced-(graphene oxide-(polystyrene-polymethyl methacrylate))/silver nanoparticle nanocomposites and their anti-microbial activity. Polymers [online], 12(5), article ID 1155. Available from: https://doi.org/10.3390/polym12051155

Herein, we report a facile process for the preparation of styrene and methyl-methacrylate copolymer nanocomposites containing reduced graphene oxide and silver nanoparticles ((R-(GO-(PS-PMMA))/AgNPs)) by using (i) microwave irradiation (MWI) to obtai... Read More about Microwave irradiation synthesis and characterization of reduced-(graphene oxide-(polystyrene-polymethyl methacrylate))/silver nanoparticle nanocomposites and their anti-microbial activity..

MUCO-DIS: a new AFM-based nanoscale dissolution technique. (2020)
Journal Article
GHORI, M.U., NIRWAN, J.S., ASIM, T., CHAHID, Y., FARHAJ, S., KHIZER, Z., TIMMINS, P. and CONWAY, B.R. 2020. MUCO-DIS: a new AFM-based nanoscale dissolution technique. AAPS PharmSciTech [online], 21(5), article ID 142. Available from: https://doi.org/10.1208/s12249-020-01697-x

Mucoadhesion-based drug delivery systems have recently gained interest because of their bio-adhesion capability, which results in enhanced residence time leading to prolonged duration of action with the mucosal surface, potentially improving complian... Read More about MUCO-DIS: a new AFM-based nanoscale dissolution technique..

Incorporating Intelligence in Fish Feeding System for Dispensing Feed Based on Fish Feeding Intensity (2020)
Journal Article
ADEGBOYE, M.A., AIBINU, A.M., KOLO, J.G., ALIYU, I., FOLORUNSO, T.A. and LEE, S.-H. 2020. Incorporating intelligence in fish feeding system for dispensing feed based on fish feeding intensity. IEEE access [online], 8, pages 91948-91960. Available from: https://doi.org/10.1109/ACCESS.2020.2994442

The amount of feed dispense to match fish appetite plays a significant role in increasing fish cultivation. However, measuring the quantity of fish feed intake remains a critical challenge. To addressed this problem, this paper proposed an intelligen... Read More about Incorporating Intelligence in Fish Feeding System for Dispensing Feed Based on Fish Feeding Intensity.

Toolpath algorithm for free form irregular contoured walls / surfaces with internal deflecting connections. (2020)
Journal Article
ARIVAZHAGAN, A. 2020. Toolpath algorithm for free form irregular contoured walls/surfaces with internal deflecting connections. Materials today: proceedings [online], 22(4): proceedings of 2nd International materials, manufacturing and modelling conference 2019 (ICMMM 2019), 29-31 March 2019, Vellore, India, pages 3037-3047. Available from: https://doi.org/10.1016/j.matpr.2020.03.439

This paper presents a toolpath generation method to efficiently machine free form irregular contoured walls / surfaces (FIWS) containing internal deflecting connections (IDC’s). The toolpath generation method is based on a series of identifications a... Read More about Toolpath algorithm for free form irregular contoured walls / surfaces with internal deflecting connections..

Assessment of the RACPC performance under diffuse radiation for use in BIPV system. (2020)
Journal Article
FOSTER, S., MUHAMMAD-SUKKI, F., RAMIREZ-INIGUEZ, R., RAINE, D.F., DECIGA-GUSI, J., ABU-BAKAR, S.H., BANI, N.A., MUNIR, A.B., MAS'UD, A.A. and ARDILA-REY, J.A. 2020. Assessment of the RACPC performance under diffuse radiation for use in BIPV system. Applied sciences [online], 10(10), article ID 3552. Available from: https://doi.org/10.3390/app10103552

In the last four decades there has been a significant increase in solar photovoltaic (PV) capacity, which makes solar one of the most promising renewable energy sources. Following this trend, solar power would become the world’s largest source of ele... Read More about Assessment of the RACPC performance under diffuse radiation for use in BIPV system..

Processing, structure and thermo-mechanical properties of reclaimed nanoclay, and its application in polyamide 6 and low-density polyethylene nanocomposites. (2020)
Thesis
SIDDIQUE, S.A. 2020. Processing, structure and thermo-mechanical properties of reclaimed nanoclay, and its application in polyamide 6 and low-density polyethylene nanocomposites. Robert Gordon University [online], PhD thesis. Available from: https://openair.rgu.ac.uk

Oil-based mud (OBM) wastes are generated every year all over the world, and remain a serious challenge for the oil and gas industry. The potential solution for this global problem is either to destroy these hazardous chemicals completely - a signific... Read More about Processing, structure and thermo-mechanical properties of reclaimed nanoclay, and its application in polyamide 6 and low-density polyethylene nanocomposites..

Numerical fluid flow modelling in multiple fractured porous reservoirs. (2020)
Journal Article
SURI, Y., ISLAM, S.Z., STEPHEN, K., DONALD, C., THOMPSON, M., DROUBI, M.G. and HOSSAIN, M. 2020. Numerical fluid flow modelling in multiple fractured porous reservoirs. Fluid dynamics and materials processing [online], 16(2), pages 245-266. Available from: https://doi.org/10.32604/fdmp.2020.06505

This paper compares the fluid flow phenomena occurring within a fractured reservoir for three different fracture models using computational fluid dynamics. The effect of the fracture-matrix interface condition is studied on the pressure and velocity... Read More about Numerical fluid flow modelling in multiple fractured porous reservoirs..

Numerical modelling of proppant transport in hydraulic fractures. (2020)
Journal Article
SURI, Y., ISLAM, S.Z. and HOSSAIN, M. 2020. Numerical modelling of proppant transport in hydraulic fractures. Fluid dynamics and materials processing [online], 16(2), pages 297-337. Available from: https://doi.org/10.32604/fdmp.2020.08421

The distribution of proppant injected in hydraulic fractures significantly affects the fracture conductivity and well performance. The proppant transport in thin fracturing fluid used during hydraulic fracturing in the unconventional reservoirs is co... Read More about Numerical modelling of proppant transport in hydraulic fractures..

A simple encoder scheme for distributed residual video coding. (2020)
Journal Article
HU, C., ZHAO, Y., YU, L., JIANG, Y. and XIONG, Y. 2020. A simple encoder scheme for distributed residual video coding. Multimedia tools and applications [online], 79(27-28), pages 20061-20078. Available from: https://doi.org/10.1007/s11042-020-08811-y

Rate-Distortion (RD) performance of Distributed Video Coding (DVC) is considerably less than that of conventional predictive video coding. In order to reduce the performance gap, many methods and techniques have been proposed to improve the coding ef... Read More about A simple encoder scheme for distributed residual video coding..

Experimental investigation on micromachining of epoxy/graphene nano platelet nanocomposites. (2020)
Journal Article
FU, G., HUO, D., SHYHA, I., PANCHOLI, K. and ALZAHRANI, B. 2020. Experimental investigation on micromachining of epoxy/graphene nano platelet nanocomposites. International journal of advanced manufacturing technology [online], 107(7-8), pages 3169-3183. Available from: https://doi.org/10.1007/s00170-020-05190-4

This paper investigates the effect of graphene nano-platelet (GNP) content (%weight fraction) on the machinability of epoxy/GNP nanocomposites. The machinability of nanocomposites with varying loadings of GNP content was evaluated experimentally thro... Read More about Experimental investigation on micromachining of epoxy/graphene nano platelet nanocomposites..

Effects of urban morphology on microclimate parameters in an urban university campus. (2020)
Journal Article
ZAKI, S.A., OTHMAN, N.E., SYAHIDAH, S.W., YAKUB, F., MUHAMMAD-SUKKI, F., ARDILA-REY, J.A., SHAHIDAN, M.F. and SAUDI, A.S.M. 2020. Effects of urban morphology on microclimate parameters in an urban university campus. Sustainability [online], 12(7), article ID 2962. Available from: https://doi.org/10.3390/su12072962

This study investigated the effects of urban morphology on microclimate parameters in an urban university campus in Malaysia. Outdoor air temperatures (Tout) were recorded at eight different locations inside the campus for seven days. The study used... Read More about Effects of urban morphology on microclimate parameters in an urban university campus..

CFD modelling of flow-induced vibration under multiphase flow regimes. (2020)
Thesis
ASIEGBU, N.M. 2020. CFD modelling of flow-induced vibration under multiphase flow regimes. Robert Gordon University [online], PhD thesis. Available from: https://openair.rgu.ac.uk

Internal multiphase flow-induced vibration (MFIV) in pipe bends poses serious problems in oil and gas, nuclear and chemical flow systems. The problems include: high amplitude displacement of the pipe structure due to resonance; fatigue failure due to... Read More about CFD modelling of flow-induced vibration under multiphase flow regimes..

Design method of a compact static nonimaging concentrator for portable photovoltaics using parameterisation and numerical optimisation. (2020)
Journal Article
FREIER RAINE, D., RAMIREZ-INIGUEZ, R., JAFRY, T., MUHAMMAD-SUKKI, F. and GAMIO, C. 2020. Design method of a compact static nonimaging concentrator for portable photovoltaics using parameterisation and numerical optimisation. Applied energy [online], 266, article ID 114821. Available from: https://doi.org/10.1016/j.apenergy.2020.114821

Portable solar chargers are one of the technologies that can help to achieve universal access to electricity by 2030. However, the large number of solar photovoltaic devices required and their short life-span make achieving this goal a resource and e... Read More about Design method of a compact static nonimaging concentrator for portable photovoltaics using parameterisation and numerical optimisation..

Is there a role for the pharmacist in screening for metabolic syndrome? (2020)
Presentation / Conference
MOUSTAFA, R., PRABHU, K.S., STEWART, D., RAYAN, C., ABDEL AZIZ, H., EL EDRISI, M., IZHAM, M., JOCHEBETH, A., KUTTIKRISHNAN, S., O'CONNOR, A., YOUNG, M., STEINHOFF, M., UDDIN, S. and TONNA, A. 2020. Is there a role for the pharmacist in screening for metabolic syndrome? Presented at the 25th European Association of Hospital Pharmacists congress (EAHP 2020): hospital pharmacy 5.0: the future of patient care, 25-27 March 2020, Gothenburg, Sweden.

Evidence for a pharmacist role in the screening of MetS has been shown to be effective in at risk populations. Despite migrants being an at risk group for the development of MetS, no literature has described screening of migrants by pharmacists. The... Read More about Is there a role for the pharmacist in screening for metabolic syndrome?.