Skip to main content

Research Repository

Advanced Search

All Outputs (1196)

Investigation of wave propagation pattern in a multilayer planar structure. (2023)
Journal Article
RAJENDRAN, V., PRATHURU, A., FERNANDEZ, C. and FAISAL, N.H. 2023. Investigation of wave propagation pattern in a multilayer planar structure. e-Journal of nondestructive testing [online], Special Issue NDE-Nuclear-2023: proceedings of the 2nd Non-destructive examination in nuclear international conference (NDE in Nuclear 2023), 27-29 June 2023, Sheffield, UK, article number 28270. Available from: https://www.ndt.net/search/docs.php3?id=28270

Acoustic emission (AE) is used to monitor conditions of various structures across many industrial sectors, including containment vessels or storage tanks of nuclear materials. Periodic monitoring, inspection and analysis of structure conditions can h... Read More about Investigation of wave propagation pattern in a multilayer planar structure..

Tracking and estimation of surgical tool pose based on the vision system for surgical robot. (2023)
Presentation / Conference
MUTHUKRISHNAN, R., KANNAN, S., ZHAO, Y. and PRABHU, R. 2023. Tracking and estimation of surgical tool pose based on the vision system for surgical robot. Presented at the 2nd MDMC (Medical device manufacturing centre) annual conference 2023, 31 May 2023, Dundee, UK.

The aim of this research is to customise a surgical robot. This research presents a Virtual Dynamic Tri-crossbar and a Virtual Stable Graph (VDT-VSG) which simplifies the task of tracing the needle angle and location.

A model-based tracking control scheme for nonlinear industrial processes involving joint unscented Kalman filter. (2023)
Journal Article
BHADRA, S., PANDA, A., BHOWMICK, P. and KANNAN, S. 2023. A model-based tracking control scheme for nonlinear industrial processes involving joint unscented Kalman filter. Journal of control and decision [online], Latest Articles. Available from: https://doi.org/10.1080/23307706.2023.2202183

This paper proposes a model-based reference tracking scheme for stable, MIMO, nonlinear processes. A Joint Unscented Kalman Filtering technique is exploited here to develop a stochastic model of the physical process via simultaneous estimation of the... Read More about A model-based tracking control scheme for nonlinear industrial processes involving joint unscented Kalman filter..

A rough Dombi Bonferroni based approach for public charging station type selection. (2023)
Journal Article
DEVECI, M., ERDOGAN, N., PAMUCAR, D., KUCUKSARI, S. and CALI, U. 2023. A rough Dombi Bonferroni based approach for public charging station type selection. Applied energy [online], 345, article 121258. Available from: https://doi.org/10.1016/j.apenergy.2023.121258

As the transition to electric mobility accelerates, charging infrastructure is rapidly expanding. Publicly accessible chargers, also known as electric vehicle supply equipment (EVSE), are critical not only for further promoting the transition but als... Read More about A rough Dombi Bonferroni based approach for public charging station type selection..

Materials for molten salt facing parts: challenges and opportunities for nuclear thermochemical cycle electrolysis. (2023)
Presentation / Conference
FAISAL, N., RAJENDRAN, V., PRATHURU, A. and HOSSAIN, M. 2023. Materials for molten salt facing parts: challenges and opportunities for nuclear thermochemical cycle electrolysis. Presented at the 5th International conference on structural nano composites 2023 (NANOSTRUC 2023), 24-26 May 2023, Nicosia, Cyprus: [virtual event].

One of the important challenges is to develop coating materials for thermochemical containment vessels and pipes that encounters the highly corrosive and harsh environment produced by the molten salt at high temperature. The aim of this review is to... Read More about Materials for molten salt facing parts: challenges and opportunities for nuclear thermochemical cycle electrolysis..

Modelling, optimisation and analysis of tubular high temperature solid oxide steam electrolysis cell. (2023)
Presentation / Conference
KURUSHINA, V., SOMAN, A., RAJENDRAN, V., PRATHURU, A., HOSSAIN, M., AMINI HORRI, B., CAI, Q. and FAISAL, N. 2023. Modelling, optimisation and analysis of tubular high temperature solid oxide steam electrolysis cell. Presented at the 36th Scottish fluid mechanics meetings, 24 May 2023, Glasgow, UK.

High temperature solid oxide steam electrolysis (HTSOSE) is an efficient and ecologically-friendly method of hydrogen production through conversion of the water substance into hydrogen and oxygen, using the heat and electrical energy. The HT SOSE is... Read More about Modelling, optimisation and analysis of tubular high temperature solid oxide steam electrolysis cell..

Bio-based sustainable polymers and materials: from processing to biodegradation. (2023)
Journal Article
OKOLIE, O., KUMAR, A., EDWARDS, C., LAWTON, L.A., OKE, A., MCDONALD, S., THAKUR, V.K. and NJUGUNA, J. 2023. Bio-based sustainable polymers and materials: from processing to biodegradation. Journal of composites science [online], 7(6), article 213. Available from: https://doi.org/10.3390/jcs7060213

In the life cycle of a material, there will be either chemical or physical change due to varying environmental factors such as biological activity, light, heat, moisture, and chemical conditions. This process leads to polymer property change as perta... Read More about Bio-based sustainable polymers and materials: from processing to biodegradation..

The effect of ice floe on the strength, stability, and fatigue of hybrid flexible risers in the Arctic sea. (2023)
Journal Article
KOROTYGIN, D., NAMMI, S.K. and PANCHOLI, K. 2023. The effect of ice floe on the strength, stability, and fatigue of hybrid flexible risers in the Artic sea. Journal of composites science [online], 7(6), article 212. Available from: https://doi.org/10.3390/jcs7060212

Flexible risers have proven to be a popular choice for deepwater exploration due to their ability to withstand functional and environmental stress while maintaining system integrity. In the challenging arctic conditions, lightweight hybrid composite... Read More about The effect of ice floe on the strength, stability, and fatigue of hybrid flexible risers in the Arctic sea..

Effect of ice floe on the strength, stability and fatigue of hybrid flexible risers in Artic sea. [Dataset] (2023)
Dataset
KOROTYGIN, D., NAMMI, S.K. and PANCHOLI, K. 2023. Effect of ice floe on the strength, stability and fatigue of hybrid flexible risers in Arctic sea. [Dataset]. Journal of composites science [online], 7(6), article 212. Available from: https://www.mdpi.com/article/10.3390/jcs7060212/s1

The harsh and extreme conditions in the Arctic region pose new challenges for the technologies and standards established for traditional open water fields, as they may not be suitable for developments in ice-covered waters. Due to the unique challeng... Read More about Effect of ice floe on the strength, stability and fatigue of hybrid flexible risers in Artic sea. [Dataset].

Materials and meta-data for thermochemical electrolysis. (2023)
Presentation / Conference
RAJENDRAN, V., MUTHUKRISHNAN, R., BALOGUN, Y., KURUSHINA, V., PRATHURU, A., HOSSAIN, M. and FAISAL, N.H. 2023. Materials and meta-data for thermochemical electrolysis. Presented at the 2023 Scotland's hydrogen economy and the chemical sciences, 23 May 2023, St Andrews, UK.

One of the important challenges is to develop coating materials for thermochemical containment vessels and pipes that encounters the highly corrosive and harsh environment produced by the molten salt at high temperature. Overall assessment based on t... Read More about Materials and meta-data for thermochemical electrolysis..

A study of the effect of open biomass burning aerosol on rainfall event over Malaysia by using EOF analysis. (2023)
Journal Article
CHEN, Y., CHAN, A., YENN, T.F., OOI, C.G. and LI, L. 2023. A study of the effect of open biomass burning aerosol on rainfall event over Malaysia by using EOF analysis. IOP conference series: earth and environmental science [online], 1167: proceedings of the 2022 International conference on science and technology applications in climate change (STACLIM-2022), 29-30 November 2022, [virtual event], article number 012006. Available from: https://doi.org/10.1088/1755-1315/1167/1/012006

Significant biomass burning aerosols resulted from biomass burning activities from Sumatra and Kalimantan Island transported to Malaysia every year from August to October by the southeast monsoon. These transboundary haze changes the precipitation pa... Read More about A study of the effect of open biomass burning aerosol on rainfall event over Malaysia by using EOF analysis..

Flow-induced forces for a group of one large and several small structures in the sheared turbulent flow. (2023)
Journal Article
ANNAPEH, H.F. and KURUSHINA, V. 2023. Flow-induced forces for a group of one large and several small structures in the sheared turbulent flow. Fluids [online], 8(5), article number 158. Available from: https://doi.org/10.3390/fluids8050158

Evaluating the hydrodynamic force fluctuations acting on each structure in a group of subsea objects of different cross-section shapes, sizes and relative positions represents a challenge due to the sensitivity of the vortex shedding process, especia... Read More about Flow-induced forces for a group of one large and several small structures in the sheared turbulent flow..

Modelling real-world renewable hydrogen energy systems for enabling Scotland zero-carbon ambition. (2023)
Presentation / Conference
ATTEYA, A.I. and ALI, D. 2023. Modelling real-world renewable hydrogen energy systems for enabling Scotland zero-carbon ambition. Presented at the 2023 All-energy and dcarbonise conference, 10-11 May 2023, Glasgow, UK.

Hydrogen is described as one of the most indicative scenarios for meeting Scotland Net-Zero carbon ambition set out for 2045. According to the 2021 Scottish Government’s hydrogen policy statement, the target is to invest 5 GW of renewable and low-car... Read More about Modelling real-world renewable hydrogen energy systems for enabling Scotland zero-carbon ambition..

Modelling, optimisation and analysis of tubular high temperature solid oxide steam electrolysis cell. (2023)
Presentation / Conference
KURUSHINA, V., SOMAN, A., RAJENDRAN, V., PRATHURU, A., HOSSAIN, M., HORRI, B.A., CAI, Q. and FAISAL, N. 2023. Modelling, optimisation and analysis of tubular high temperature solid oxide steam electrolysis cell. Presented at the 2023 All-energy and dcarbonise conference, 10-11 May 2023, Glasgow, UK.

Developing electrolyser cells with enhanced hydrogen production and their scalable manufacturing can play an important role in enabling not only eco-friendly development but also cost-effective, reliable, and sustainable opportunities. Thermomechanic... Read More about Modelling, optimisation and analysis of tubular high temperature solid oxide steam electrolysis cell..

Numerical investigations of a swirling two-phase air-water upward flow in straight and convergent vertical pipe. (2023)
Journal Article
MANIMARAN, R., KUMAR, M.S., KARUNAMURTHY, K. and HOSSAIN, M. 2023. Numerical investigations of a swirling two-phase air-water upward flow in straight and convergent vertical pipe. International journal of fluid mechanics research [online], 50(2), pages 31-57. Available from: https://doi.org/10.1615/InterJFluidMechRes.2023048031

In this paper, a numerical study is presented to analyze the flow parameters such as longitudinal and transverse velocities, hydrodynamic pressure, and volume fraction inside a vertical pipe. A vertical ascending swirl flow is established with the sp... Read More about Numerical investigations of a swirling two-phase air-water upward flow in straight and convergent vertical pipe..

Role of interface in optimisation of polyamide-6/Fe3O4 nanocomposite properties suitable for induction heating. [Dataset] (2023)
Dataset
GUPTA, R., PANCHOLI, P.V., YU, X., GUPTA, L., STENNING, G.B.G., BUCKNALL, D., FLYNN, D. and PANCHOLI, K. 2023. Role of interface in optimisation of polyamide-6/Fe3O4 nanocomposite properties suitable for induction heating. [Dataset]. Nano-structures and nano-objects [online], 34, article number 100973. Available from: https://tinyurl.com/47tkuzks

Induction heating of magnetic nanoparticles (MNPs) and localised melting of the surrounding high temperature engineering polymer matrix by generating microscopic or macroscopic eddy currents during magnetisation of a polymer nanocomposite (PMC) is cr... Read More about Role of interface in optimisation of polyamide-6/Fe3O4 nanocomposite properties suitable for induction heating. [Dataset].

Role of interface in optimisation of polyamide-6/Fe3O4 nanocomposite properties suitable for induction heating. (2023)
Journal Article
GUPTA, R., PANCHOLI, P.V., YU, X., GUPTA, L., STENNING, G.B.G., BUCKNALL, D., FLYNN, D. and PANCHOLI, K. 2023. Role of interface in optimisation of polyamide-6/Fe3O4 nanocomposite properties suitable for induction heating. Nano-structures and nano-objects [online], 34, article number 100973. Available from: https://doi.org/10.1016/j.nanoso.2023.100973

Induction heating of magnetic nanoparticles (MNPs) and localised melting of the surrounding high temperature engineering polymer matrix by generating microscopic or macroscopic eddy currents during magnetisation of a polymer nanocomposite (PMC) is cr... Read More about Role of interface in optimisation of polyamide-6/Fe3O4 nanocomposite properties suitable for induction heating..

Models of work-based learning with examples of practice in petroleum engineering: a university-employer partnership. (2023)
Conference Proceeding
AMISH, M., JIHAN, S. and WYATT, A. 2023. Models of work-based learning with examples of practice in petroleum engineering: a university-employer partnership. In Proceedings of the 4th Global conference on education and teaching (GLOBALET 2023), 21-23 April 2023, Athens, Greece. Vilnius: Mokslines Leidybos Deimantas (Diamond Scientific Publishing) [online], pages 33-49. Available from: https://doi.org/10.33422/4th.globalet.2023.04.103

Work-based learning (WBL) is a collaborative tool employed by educational institutions and industry to educate and develop their students or workforce in all three strands of learning: for, at, and through work. This paper presents petroleum engineer... Read More about Models of work-based learning with examples of practice in petroleum engineering: a university-employer partnership..

Developing collaborative online project-based learning model to enhance learning in engineering. (2023)
Conference Proceeding
AMISH, M. and JIHAN, S. 2023. Developing collaborative online project-based learning model to enhance learning in engineering. In Proceedings of the 4th Global conference on education and teaching 2023 (GlobalET 2023), 21-23 April 2023, Athens, Greece. Vilnius: Diamond scientific publishing [online], pages 59-75. Available from: https://doi.org/10.33422/4th.globalet.2023.04.105

It has been widely reported that knowledge and skills gained in formal Higher Education Institute courses are different from those required at work. Students lack soft skills, according to feedback from employers. Many universities have become proact... Read More about Developing collaborative online project-based learning model to enhance learning in engineering..

Waste bone char-derived adsorbents: characteristics, adsorption mechanism and model approach. (2023)
Journal Article
HART, A., PORBENI, D.W., OMONMHENLE, S. and PERETOMODE, E. 2023. Waste bone char-derived adsorbents: characteristics, adsorption mechanism and model approach. Environmental technology reviews [online], 12(1), pages 175-204. Available from: https://doi.org/10.1080/21622515.2023.2197128

The increase in meat consumption will result in a significant amount of bone being generated as solid waste and causing pollution to the environment. By pyrolysis or gasification, waste bones can be converted into bone char (BC), which can be used as... Read More about Waste bone char-derived adsorbents: characteristics, adsorption mechanism and model approach..