Skip to main content

Research Repository

Advanced Search

Doctor Taimoor Asim


Effect of manufacturing method of a centrifugal fan hub on its heat dissipation characteristics. (2018)
Conference Proceeding
SWINTON, J., ESHAAFI, T., ASIM, T., IRONS, J. and MISHRA, R. 2017. Effect of manufacturing method of a centrifugal fan hub on its heat dissipation characteristics. In Sherrington, I., Onsy, A., Brooks, H., George, J. and Rao, R. (eds.) Proceedings of the 30th International conference on condition monitoring and diagnostic engineering management (COMADEM 2017), 10-13 July 2017, Preston, UK. Preston: University of Central Lancashire [online], pages 355-360. Available from: http://clok.uclan.ac.uk/24444/

As the process temperature of a fan system increases, the amount of heat that gets transmitted to the bearings and/or motor increases. If this is not accounted for, it can lead to catastrophic failure. The main heat conduction path is through the sha... Read More about Effect of manufacturing method of a centrifugal fan hub on its heat dissipation characteristics..

Development of an integrated connectedness model to evaluate the effectiveness of teaching and learning. (2016)
Conference Proceeding
AL-HAMAD, S., KOLLAR, L.E., ASIM, T. and MISHRA, R. 2016. Development of an integrated connectedness model to evaluate the effectiveness of teaching and learning. In Dwivedi, Y.K., Mäntymäki, M., Ravishankar, M.N., Janssen, M., Clement, M., Slade, E.L., Rana, N.P., Al-Sharhan, S. and Simintiras, A.C. (eds.) Social media: the good, the bad and the ugly: proceedings of the 15th International Federation of Information Processing (IFIP) e-Business, e-services and e-society conference (I3E 2016), 13-15 September, 2016, Swansea, UK. Lecture notes in computer science, 9844. Cham: Springer [online], pages 707-716. Available from: https://doi.org/10.1007/978-3-319-45234-0_64

Use of blended learning system in a structured manner results in achieving higher order skills in cognitive domain. However, there is a need to quantify skills improvements as the students go through lower level skills to higher level skills. To asce... Read More about Development of an integrated connectedness model to evaluate the effectiveness of teaching and learning..

Numerical analysis of a railway compartment fire. (2015)
Conference Proceeding
ENBAYA, A., ASIM, T., MISHRA, R. and RAO, R.B.K.N. 2015. Numerical analysis of a railway compartment fire. In Kumar, U., Ahmadi, A., Verma, A.K. and Varde, P. (eds.) Current trends in reliability, availability, maintainability and safety: an industry perspective; selected papers from 2015 Joint international conference on reliability, safety and hazard - advances in reliability, maintenance and safety (ICRESH-ARMS 2015), 1-4 June 2015, Luleå, Sweden. Lecture notes in mechanical engineering, 11236. Cham: Springer [online], pages 471-484. Available from: https://doi.org/10.1007/978-3-319-23597-4_34

Trains are considered to be the safest on-land transportation means for both passengers and cargo. Train accidents have been mainly disastrous, especially in case of fire, where the consequences are extensive loss of life and goods. The fire would ge... Read More about Numerical analysis of a railway compartment fire..

Effect of solar heat flux and thermal loading on the flow distribution within the riser pipes of a closed-loop solar thermo-syphon hot water system. (2015)
Conference Proceeding
FREEGAH, B., ASIM, T. and MISHRA, R. 2015. Effect of solar heat flux and thermal loading on the flow distribution within the riser pipes of a closed-loop solar thermo-syphon hot water system. In Proceedings of 28th Condition monitoring and diagnostic engineering management international congress 2015 (COMADEM 2015), co-located with 10th regional Congress on non-destructive and structural testing (X CORENDE), 1-4 December 2015, Buenos Aires, Argentina. Birmingham: COMADEM International, pages 398-405.

Solar energy is one of the main sources of renewable energy that is abundantly available throughout the world. Solar energy can be used for useful purposes through a number of mechanical artefacts. One such artefact is known as Thermo-syphon, which t... Read More about Effect of solar heat flux and thermal loading on the flow distribution within the riser pipes of a closed-loop solar thermo-syphon hot water system..

Optimal vaneless diffuser design for a high-end centrifugal compressor. (2015)
Conference Proceeding
AHMED, N., ASIM, T., MISHRA, R., SIVAGNANASUNDARAM, S. and EYNON, P. 2015. Optimal vaneless diffuser design for a high-end centrifugal compressor. In Proceedings of 28th Condition monitoring and diagnostic engineering management international congress 2015 (COMADEM 2015), co-located with 10th regional Congress on non-destructive and structural testing (X CORENDE), 1-4 December 2015, Buenos Aires, Argentina. Birmingham: COMADEM International, pages 406-413.

Turbochargers are widely used in the automotive industry to reduce engine emissions and to increase the power. Centrifugal compressors are an integral part of turbochargers. Centrifugal compressors comprises primarily of inducer, impeller, diffuser a... Read More about Optimal vaneless diffuser design for a high-end centrifugal compressor..

Effect of the shape of stator blades on the performance output of a vertical axis marine current turbine. (2013)
Conference Proceeding
ASIM, T., MISHRA, R. and UBBI, K.S. 2013. Effect of the shape of stator blades on the performance output of a vertical axis marine current turbine. In Proceedings of 26th Condition monitoring and diagnostic engineering management international congress 2013 (COMADEM 2013), 11-­13 June 2013, Helsinki, Finland. Birmingham: COMADEM International.

Due to the diminishing reserves of fossil fuels and increased pollution from exploitation of these fuels, the world is focusing on the renewable energy sources. Energy from tidal waves is one of the most exciting forms of renewable energy because of... Read More about Effect of the shape of stator blades on the performance output of a vertical axis marine current turbine..

Effect of blade faults on the performance characteristics of a vertical axis wind turbine. (2013)
Conference Proceeding
PARK, K.-S., ASIM, T. and MISHRA, R. 2013. Characteristics of a vertical axis wind turbine. In Proceedings of 26th Condition monitoring and diagnostic engineering management international congress 2013 (COMADEM 2013), 11­-13 June 2013, Helsinki, Finland. Birmingham: COMADEM International.

Due to the diminishing reserves of fossil fuels and increased pollution from exploitation of these fuels, the world is focusing on the renewable energy sources. Wind is being considered as one of the prime next generation energy sources. Considerable... Read More about Effect of blade faults on the performance characteristics of a vertical axis wind turbine..

Computational fluid dynamics based analysis of a closed thermo-siphon hot water solar system. (2013)
Conference Proceeding
FREEGAH, B., ASIM, T. and MISHRA, R. 2013. Computational fluid dynamics based analysis of a closed thermo­siphon hot water solar system. In Proceedings of 26th Condition monitoring and diagnostic engineering management international congress 2013 (COMADEM 2013), 11-­13 June 2013, Helsinki, Finland. Birmingham: COMADEM International.

One of the alternative sources of energy is solar energy which is available in abundance throughout the world. The energy contained within the solar rays is capable of starting natural convection within closed mechanical systems containing a suitable... Read More about Computational fluid dynamics based analysis of a closed thermo-siphon hot water solar system..

Computational fluid dynamics based performance optimisation of vertical axis marine current turbines. (2012)
Conference Proceeding
PARK, K.-S., ASIM, T., MISHRA, R., SHAHZAD, A. and MIRANGWANDA, G. 2012. Computational fluid dynamics based performance optimisation of vertical axis marine current turbines. Proceedings of 2nd international workshop and congress eMaintenance 2012 (eMaintenance 2012): trends in technologies and methodologies challenges, possibilities and applications, 12-14 December 2012, Luleå, Sweden. Luleå: Luleå University of Technology, pages 119-124. Hosted on pdfcoffee.com [online]. Available from: https://pdfcoffee.com/qdownload/proceedings-emaintenance-pdf-free.html

Rapid decrease in the fossil fuels in the last couple of decades has stirred the researchers to find alternative sources for the production of power. Wind and tidal energies are the two most promising alternatives to the fossil fuels. While most of t... Read More about Computational fluid dynamics based performance optimisation of vertical axis marine current turbines..

Numerical simulations of effects of faults in a vertical axis wind turbine’s performance. (2012)
Conference Proceeding
SHAHZAD, A., ASIM, T., PARK, K.-S., PRADHAN, S. and MISHRA, R. 2012. Numerical simulations of effects of faults in a vertical axis wind turbine's performance. Proceedings of 2nd international workshop and congress eMaintenance 2012 (eMaintenance 2012): trends in technologies and methodologies challenges, possibilities and applications, 12-14 December 2012, Luleå, Sweden. Luleå: Luleå University of Technology, pages 113-117. Hosted on pdfcoffee.com [online]. Available from: https://pdfcoffee.com/qdownload/proceedings-emaintenance-pdf-free.html

Renewable sources of energy are being developed globally to overcome the present excessive dependence on fossil fuels. Wind energy is one of the important sources of renewable energy. Considerable amount of research is being carried out on the innova... Read More about Numerical simulations of effects of faults in a vertical axis wind turbine’s performance..