Skip to main content

Research Repository

Advanced Search

Outputs (7)

Characteristics of gas transport through inorganic ceramic membranes as porous media using air and nitrogen. (2022)
Conference Proceeding
IGBAGARA, W., HASHM, I.A., AISUENI, F., OGUNLUDE, P., RAMALAN, M., OGOUN, E., ASIM, T. and GOBINA, E. 2022. Characteristics of gas transport through inorganic ceramic membranes as porous media using air and nitrogen. In Proceedings of the 2nd International congress on scientific advances 2022 (ICONSAD'22), 21-24 December 2022, [virtual conference]. Turkey: ICONSAD [online], pages 417-425. Available from: https://en.iconsad.org/_files/ugd/1dd905_c45aeddf416d497e93113f00f465739b.pdf

Permeation experiments have been conducted using porous ceramic membranes having different pore sizes of 200nm and 6000nm respectively. Air and N2 gases were used as the characterizing fluids and experiments were carried out at temperatures of 20 C,... Read More about Characteristics of gas transport through inorganic ceramic membranes as porous media using air and nitrogen..

Numerical prediction of the effect of thermal plume of a standing human on the airborne aerosol flow in a room: assessment of the social distancing rule. (2022)
Journal Article
HOSSAIN, M., CHINENYE-KANU, N., FAISAL, N.H., PRATHURU, A., ASIM, T. and BANIK, S. 2023. Numerical prediction of the effect of thermal plume of a standing human on the airborne aerosol flow in a room: assessment of the social distancing rule. Aerosol science and engineering [online], 7(1), pages 96-106. Available from: https://doi.org/https://doi.org/10.1007/s41810-022-00165-2

The purpose of the study is to investigate the dispersion of droplet nuclei/aerosol which are produced during coughing and continuous talking to quantify the risk of infection due to airborne disease transmission. A three-dimensional modelling of aer... Read More about Numerical prediction of the effect of thermal plume of a standing human on the airborne aerosol flow in a room: assessment of the social distancing rule..

Effect of stator blades on the startup dynamics of a vertical axis wind turbine. (2022)
Journal Article
ASIM, T., SINGH, D., SIDDIQUI, M.S. and MCGLINCHEY, D. 2022. Effect of stator blades on the startup dynamics of a vertical axis wind turbine. Energies [online], 15(21), 8135. Available from: https://doi.org/10.3390/en15218135

Vertical Axis Wind Turbines (VAWTs) are omni-directional, low-cost, low-efficiency wind power extractors. A conventional drag-based VAWT consists of multiple thin rotor blades with a typical peak Tip Speed Ratio (λ) of less than 1. Their lower cut-in... Read More about Effect of stator blades on the startup dynamics of a vertical axis wind turbine..

Combustion characterization of hybrid methane-hydrogen gas in domestic swirl stoves. (2022)
Journal Article
LIU, X., ZHU, G., ASIM, T. and MISHRA, R. 2022. Combustion characterization of hybrid methane-hydrogen gas in domestic swirl stoves. Fuel [online], 333(Part 2), article 126413. Available from: https://doi.org/10.1016/j.fuel.2022.126413

Combustion of hybrid natural gas (methane) and hydrogen mixture in domestic swirl stoves has been characterized using hot-state experiments and numerical analysis. The detailed combustion mechanism of methane and hydrogen (GRI-Mech 3.0) has been simp... Read More about Combustion characterization of hybrid methane-hydrogen gas in domestic swirl stoves..

Application of momentum flux method for the design of an α-shaped flame incinerator fueled with two-component solid waste. (2022)
Journal Article
LIU, X., ZHU, G., ASIM, T. and MISHRA, R. 2022. Application of momentum flux method for the design of an α-shaped flame incinerator fueled with two-component solid waste. Energy [online], 248, article 123647. Available from: https://doi.org/10.1016/j.energy.2022.123647

Kitchen waste and tree branches are two of the most common solid waste materials suitable for on-site disposal. Quantification of combustion characteristics of these waste materials is vital for designing an appropriate incinerator. In this paper, th... Read More about Application of momentum flux method for the design of an α-shaped flame incinerator fueled with two-component solid waste..

A review of recent advancements in offshore wind turbine technology. (2022)
Journal Article
ASIM, T., ISLAM, S.Z., HEMMATI, A. and KHALID, M.S.U. 2022. A review of recent advancements in offshore wind turbine technology. Energies [online], 15(2), article 579. Available from: https://doi.org/10.3390/en15020579

Offshore wind turbines are becoming increasingly popular due to their higher wind energy harnessing capabilities and lower visual pollution. Researchers around the globe have been reporting significant scientific advancements in offshore wind turbine... Read More about A review of recent advancements in offshore wind turbine technology..

Parametric analysis using CFD to study the impact of geometric and numerical modeling on the performance of a small scale horizontal axis wind turbine. (2022)
Journal Article
SIDDIQUI, M.S., KHALID, M.H., BADAR, A.W., SAEED, M. and ASIM, T. 2022. Parametric analysis using CFD to study the impact of geometric and numerical modeling on the performance of a small scale horizontal axis wind turbine. Energies [online], 15(2), article 505. Available from: https://doi.org/10.3390/en15020505

The reliance on Computational Fluid Dynamics (CFD) simulations has drastically increased over time to evaluate the aerodynamic performance of small-scale wind turbines. With the rapid variability in customer demand, industrial requirements, economic... Read More about Parametric analysis using CFD to study the impact of geometric and numerical modeling on the performance of a small scale horizontal axis wind turbine..