Skip to main content

Research Repository

Advanced Search

Neutron scattering study of strain behaviour of porous rocks subjected to heating and unconfined uniaxial compression. (2018)
Journal Article
FAISAL, N.H., SANAEE, R., SINGH, R.M., MURRAY, J., MCLAUGHLIN, A., HEALY, D. and LEE, T.-L. 2018. Neutron scattering study of strain behaviour of porous rocks subjected to heating and unconfined uniaxial compression. Journal of physics: conference series [online], 1106: proceedings of the 2018 Modern practice in stress and vibration analysis (MPSVA 2018), 2-4 July 2018, Cambridge, UK, article ID 012011. Available from: https://doi.org/10.1088/1742-6596/1106/1/012011

Neutron scattering (at ENGIN-X) was used to examine strain distributions in two hydrocarbon reservoir rock types (i.e. sandstone and chalk) under uniaxial stress (up to 35 MPa) at temperature as high as 70 °C to utilise the advantages of neutron scat... Read More about Neutron scattering study of strain behaviour of porous rocks subjected to heating and unconfined uniaxial compression..

Comparative study of corrosion performance of HVOF-sprayed coatings produced using conventional and suspension WC-Co feedstock. (2018)
Journal Article
AHMED.R., VOURLIAS, G., ALGOBURI, A., VOGIATZIS, C., CHALIAMPALIAS, D., SKOLIANOS, S., BERGER, L.-M., PAUL, S., FAISAL, N.H., TOMA, F.-L., AL-ANAZI, N.M and GOOSEN, M.F.A. 2018. Comparative study of corrosion performance of HVOF-sprayed coatings produced using conventional and suspension WC-Co feedstock. Journal of thermal spray technology [online], 27(8), pages 1579-1593. Available from: https://doi.org/10.1007/s11666-018-0775-2

Corrosion properties of nanostructured coatings deposited by suspension high-velocity oxy-fuel (S-HVOF) via an aqueous suspension of milled WC-Co powder were compared with conventional HVOF-sprayed coatings. Microstructural evaluations of these coati... Read More about Comparative study of corrosion performance of HVOF-sprayed coatings produced using conventional and suspension WC-Co feedstock..

Diametral compression test method to analyse relative surface stresses in thermally sprayed coated and uncoated circular disc specimens. (2018)
Journal Article
FAISAL, N.H., MANN, L., DUNCAN, C., DUNBAR, E., CLAYTON, M., FROST, M., MCCONNACHIE, J., FARDAN, A. and AHMED, R. 2019. Diametral compression test method to analyse relative surface stresses in thermally sprayed coated and uncoated circular disc specimens. Surface and coatings technology [online], 357, pages 497-514. Available from: https://doi.org/10.1016/j.surfcoat.2018.10.053

In firsts of its investigation, a diametral compression destructive testing method (also known as Brazilian test) was performed on thermally sprayed coated and uncoated circular disc specimens to compare relative surface stresses. The coating investi... Read More about Diametral compression test method to analyse relative surface stresses in thermally sprayed coated and uncoated circular disc specimens..

Neutron diffraction strain analysis of ceramic coatings from suspension thermal spray. [Dataset] (2018)
Dataset
HUSSAIN, T., MARTIN, D.T., LEE, T.L., DERELIZADE, K., KELLEHER, J., OWOSENI, T., FAISAL, N. and PULSFORD, J. 2018. Neutron diffraction strain analysis of ceramic coatings from suspension thermal spray. [Dataset]. Hosted on STFC ISIS neutron and muon source data journal [online]. Available from: https://doi.org/10.5286/ISIS.E.98023160

Liquid feedstock containing sub-micron to nano-sized particles is used in suspension thermal spray to produce nanostructured ceramic coatings with improved density, strength and durability over conventional powder based thermal sprayed coatings. It h... Read More about Neutron diffraction strain analysis of ceramic coatings from suspension thermal spray. [Dataset].

Modal acoustic emission analysis of mode-I and mode-II fracture of adhesively-bonded joints. (2018)
Presentation / Conference
CRAWFORD, A.R., DROUBI, M.G. and FAISAL, N.H. 2018. Modal acoustic emission analysis of mode-I and mode-II fracture of adhesively-bonded joints. Presented at the 33rd European Working Group on Acoustic Emission (EWGAE) European acoustic emission testing conference (EWGAE 2018), 12-14 September 2018, Senlis, France [online], pages 218-228. Available from: http://www.ewgae2018.com/wp-content/uploads/2018/09/EWGAE-Conference-Proceedings_2018-1.pdf

Acoustic emission (AE) testing has previously been demonstrated to be well suited to detecting failure in adhesively-bonded joints. In this work, the relationship between the fracture-mode of adhesively-bonded specimens and the acoustic wave-modes ex... Read More about Modal acoustic emission analysis of mode-I and mode-II fracture of adhesively-bonded joints..

Future of nanoindentation in archaeometry. (2018)
Journal Article
FAISAL, N.H., AHMED, R., GOEL, S. and CROSS, G. 2018. Future of nanoindentation in archaeometry. Journal of materials research [online], 33(17), pages 2515-2532. Available from: https://doi.org/10.1557/jmr.2018.280

This review aims to consolidate scarce literature on the use of modern nanomechanical testing technique like instrumented nanoindentation in the field of archaeometry materials research. The review showcase on how can the nanoindentation tests provid... Read More about Future of nanoindentation in archaeometry..

Neutron diffraction residual stress measurements in suspension HVOF sprayed Al2O3 and YSZ coatings. (2018)
Conference Proceeding
OWOSENI, T., BAI, M., HUSSAIN, T., FAISAL, N.H., LEE, T.L. and KELLEHER, J. 2019. Neutron diffraction residual stress measurements in suspension HVOF sprayed Al2O3 and YSZ coatings. In Azarmi, F., Balani, K., Eden, T., Hussain, T., Li, H., Shinoda, K. and Toma, F.-L. (eds.) Proceedings of the 2018 International thermal spray conference (ITSC 2018), 7-10 May 2018, Orlando, USA. Ohio: ASM International [online], pages 490-495. Available from: http://www.proceedings.com/47648.html

Thermally sprayed coatings have residual stresses due to the processing techniques where the particles go through thermal softening/melting, high velocity impact and rapid solidification. The nature and magnitude of residual stresses in these coating... Read More about Neutron diffraction residual stress measurements in suspension HVOF sprayed Al2O3 and YSZ coatings..

Analysis of acoustic emission propagation in metal-to-metal adhesively-bonded joints. (2018)
Journal Article
CRAWFORD, A., DROUBI, M.G. and FAISAL, N.H. 2018. Analysis of acoustic emission propagation in metal-to-metal adhesively-bonded joints. Journal of nondestructive evaluation [online], 37(2), article number 33. Available from: https://doi.org/10.1007/s10921-018-0488-y

Acoustic emission (AE) monitoring shows promise as one of the most effective methods for condition monitoring of adhesively-bonded joints. Previous research has demonstrated its ability to detect, locate and classify adhesive joint failure, though in... Read More about Analysis of acoustic emission propagation in metal-to-metal adhesively-bonded joints..

Neutron scattering of porous rocks subjected to uniaxial compression in cryogenic conditions for offshore drilling operations in Arctic. [Dataset] (2018)
Dataset
FAISAL, N., SANAEE, R., LEE, T.L., MCLAUGHLIN, A. and SINGH, R.M. 2018. Neutron scattering of porous rocks subjected to uniaxial compression in cryogenic conditions for offshore drilling operations in Arctic. [Dataset]. Hosted on STFC ISIS neutron and muon source data journal [online]. Available from: https://doi.org/10.5286/ISIS.E.92924528

In August 2015, the oil and gas company (Royal Dutch Shell plc) were granted the final permit it needs to begin drilling below the ocean floor for oil in the Arctic. They have been allowed to drill just the top sections of two wells, off the coast of... Read More about Neutron scattering of porous rocks subjected to uniaxial compression in cryogenic conditions for offshore drilling operations in Arctic. [Dataset].

Residual strain measurement in suspension based thermal sprayed nanostructured alumina coatings: part two. [Dataset] (2018)
Dataset
HUSSAIN, T., MURRAY, J., LEE, T.L., OWOSENI, T., BAI, M., FAISAL, N., MARTIN, D.T., DERELIZADE, K. and KELLEHER, J. 2018. Residual strain measurement in suspension based thermal sprayed nanostructured alumina coatings: part two. [Dataset]. Hosted on STFC ISIS neutron and muon source [online]. Available from: https://doi.org/10.5286/ISIS.E.90880498

Suspension and solution precursor (SSP) spraying is an emerging thermal spraying technology which utilises liquid feedstock containing sub-micrometre and nanoparticles. Alumina (Al2O3) is a widely used engineering ceramic and it has excellent dielect... Read More about Residual strain measurement in suspension based thermal sprayed nanostructured alumina coatings: part two. [Dataset].