All Outputs (10)

A comprehensive case study of climate change impacts on the cooling load in an air-conditioned office building in Malaysia. (2017)
Journal Article
YAU, Y.H. and HASBI, S. 2017. A comprehensive case study of climate change impacts on the cooling load in an air-conditioned office building in Malaysia. Energy procedia [online], 143: proceedings of the 2017 World engineers summit joint conference of applied energy symposium and forum and low carbon urban energies (WES-CUE 2017), 18-21 July 2017, Singapore, pages 295-300. Available from: https://doi.org/10.1016/j.egypro.2017.12.687

In an earlier paper [1], the authors had comprehensively reviewed the climate change impacts for commercial buildings and their technical services in the tropics, and it revealed that numerous studies have been conducted to assess the climate change... Read More about A comprehensive case study of climate change impacts on the cooling load in an air-conditioned office building in Malaysia..

Experimental evaluation of a solar window incorporating rotationally asymmetrical compound parabolic concentrators (RACPC). (2017)
Journal Article
RAMIREZ-INIGUEZ, R., DECIGA-GUSI, J., FREIER, D., ABU-BAKAR, S.H. and MUHAMMAD-SUKKI, F. 2017. Experimental evaluation of a solar window incorporating rotationally asymmetrical compound parabolic concentrators (RACPC). Energy procedia [online], 130: proceedings of the 11th SNEC international photovoltaic power generation conference and exhibition (SNEC 2017), 17-20 April 2017, Shanghai, China, pages 102-107. Available from: https://doi.org/10.1016/j.egypro.2017.09.402

Building integrated photovoltaic (BIPV) systems have been proposed to make solar photovoltaic systems more attractive. These systems are not only capable of generating electricity, but can also contribute to minimise energy consumption in buildings b... Read More about Experimental evaluation of a solar window incorporating rotationally asymmetrical compound parabolic concentrators (RACPC)..

Mixed-mode fracture characteristics of metal-to-metal adhesively bonded joints: experimental and simulation methods. (2017)
Journal Article
DROUBI, M.G., MCAFEE, J., HORNE, R.C., WALKER, S., KLAASSEN, C., CRAWFORD, A., PRATHURU, A.K. and FAISAL, N.H. 2017. Mixed-mode fracture characteristics of metal-to-metal adhesively bonded joints: experimental and simulation methods. Procedia structural integrity [online], 5: proceedings of the 2nd International conference on structural integrity (ICSI 2017), 4-7 September 2017, Funchal, Portugal, pages 40-47. Available from: https://doi.org/10.1016/j.prostr.2017.07.059

Fracture behavior of adhesively bonded joints subjected to mixed-mode (i.e. mode I+II) loading conditions is of importance in many industrial applications. This research therefore aims to characterise the failure behaviour of metal-to-metal (i.e. bot... Read More about Mixed-mode fracture characteristics of metal-to-metal adhesively bonded joints: experimental and simulation methods..

Efficiency improvement of vertical axis wind turbines with an upstream deflector. (2017)
Journal Article
STOUT, C., ISLAM, S., WHITE, A., ARNOTT, S., KOLLOVOZI, E., SHAW, M., DROUBI, G., SINHA, Y. and BIRD, B. 2017. Efficiency improvement of vertical axis wind turbines with an upstream deflector. Energy procedia [online], 118: proceedings of the 2nd International conference on advances on clean energy research (ICACER 2017), 7-9 April 2017, Berlin, Germany, pages 141-148. Available from: https://doi.org/10.1016/j.egypro.2017.07.032

The suitability of using an upstream deflector to improve the efficiency of a vertical axis wind turbine is presented in this study. A two-dimensional vertical axis wind turbine (VAWT) was modelled and simulated using ANSYS Fluent 14.0 computational... Read More about Efficiency improvement of vertical axis wind turbines with an upstream deflector..

Computational study of nanostructured composite materials for photonic crystal fibre sensors. (2017)
Journal Article
JOHNY, J., PRABHU, R. and FUNG, W.-K. 2016. Computational study of nanostructured composite materials for photonic crystal fibre sensors. IOP conference series: materials science and engineering [online], 195: proceedings of the 3rd International conference on structural nano composites (NANOSTRUC 2016), 12-16 September 2016, Aberdeen, UK, article number 012012. Available from: https://doi.org/10.1088/1757-899X/195/1/012012

Photonic Crystal Fibres (PCFs) developed using nanostructured composite materials provides special optical properties which can revolutionise current optical sensing technologies. The modal and propagation characteristics of the PCF can be tailored b... Read More about Computational study of nanostructured composite materials for photonic crystal fibre sensors..

Synthesis, structural and morphological property of BaSnO3 nanopowder prepared by solid state ceramic method. (2017)
Journal Article
JOHN, J., PILLAI, V.P.M., THOMAS, A.R., PHILIP, R., JOSEPH, J., MUTHUNATESAN, S., RAGAVENDRAN, V. and PRABHU, R. 2016. Synthesis, structural and morphological property of BaSnO3 nanopowder prepared by solid state ceramic method. IOP conference series: materials science and engineering [online], 195: proceedings of the 3rd International conference on structural nano composites (NANOSTRUC 2016), 12-16 September 2016, Aberdeen, UK, article number 012007. Available from: https://doi.org/10.1088/1757-899X/195/1/012007

BaSnO3 is a cubic perovskite-type oxide that behaves as an n-type semiconductor with a wide band gap of 3.4 eV and remains stable at temperatures up to 1000{deg}C. It has wide applications such as thermally stable capacitors, humidity sensors, gas se... Read More about Synthesis, structural and morphological property of BaSnO3 nanopowder prepared by solid state ceramic method..

Tensile and flexural properties of hybrid graphene oxide/epoxy carbon fibre reinforced composites. (2017)
Journal Article
WATSON, G., STAROST, K., BARI, P., FAISAL, N., MISHRA, S. and NJUGUNA, J. 2016. Tensile and flexural properties of hybrid graphene oxide/epoxy carbon fibre reinforced composites. IOP conference series: materials science and engineering [online], 195: proceedings of the 3rd International conference on structural nano composites (NANOSTRUC 2016), 12-16 September 2016, Aberdeen, UK, article number 012009. Available from: https://doi.org/10.1088/1757-899X/195/1/012009

In this study, nano-sized graphene oxide sheets were homogenously dispersed via sonication methods in epoxy followed by vacuum resin infusion for the fabrication of the epoxy, graphene oxide (GO) and micro-sized carbon fibre reinforced nanocomposites... Read More about Tensile and flexural properties of hybrid graphene oxide/epoxy carbon fibre reinforced composites..

Environmental particle emissions due to automated drilling of polypropylene composites and nanocomposites reinforced with talc, montmorillonite and wollastonite. (2017)
Journal Article
STAROST, K., FRIJNS, E., LAER, J.V., FAISAL, N., EGIZABAL, A., ELIZEXTEA, C., NELISSEN, I., BLAZQUEZ, M. and NJUGUNA, J. 2016. Environmental particle emissions due to automated drilling of polypropylene composites and nanocomposites reinforced with talc, montmorillonite and wollastonite. IOP conference series: materials science and engineering [online], 195: proceedings of the 3rd International conference on structural nano composites (NANOSTRUC 2016), 12-16 September 2016, Aberdeen, UK, article number 012011. Available from: https://doi.org/10.1088/1757-899X/195/1/012011

In this study, the effect on nanoparticle emissions due to drilling on Polypropylene (PP) reinforced with 20% talc, 5% montmorillonite (MMT) and 5% Wollastonite (WO) is investigated. The study is the first to explore the nanoparticle release from WO... Read More about Environmental particle emissions due to automated drilling of polypropylene composites and nanocomposites reinforced with talc, montmorillonite and wollastonite..

Oil based drilling fluid waste: an overview on environmentally persistent pollutants. (2017)
Journal Article
SIDDIQUE, S., KWOFFIE, L., ADDAE-AFOAKWA, K., YATES, K. and NJUGUNA, J. 2016. Oil based drilling fluid waste: an overview on environmentally persistent pollutants. IOP conference series: materials science and engineering [online], 195: proceedings of the 3rd International conference on structural nano composites (NANOSTRUC 2016), 12-16 September 2016, Aberdeen, UK, article number 012008. Available from: https://doi.org/10.1088/1757-899X/195/1/012008

Operational discharges of spent drilling fluid, produced water, and accumulated drill cuttings from oil and gas industry are a continuous point source of environmental pollution. To meet the strict environmental standard for waste disposal, oil and g... Read More about Oil based drilling fluid waste: an overview on environmentally persistent pollutants..

Development of novel vehicle design modelling functions for quantifying vehicles’ shapes. (2017)
Journal Article
SENDANAYAKE, I., ASIM, T. and MISHRA, R. 2017. Development of novel vehicle design modelling functions for quantifying vehicles' shapes. International journal of research, science, technology and management: proceedings of 2017 International conference mechanical, energy and power systems (ICMEPS 2017), 20-21 January 2017, Bhopal, India [online], 7(1), pages 26-31. Available from: http://ijrstm.net/?ddownload=517

The inland goods transportation sector has become dominant by high fuel consuming heavy goods vehicles, which are more commonly known as truck-trailer units. Manufacturers have been trying to design aerodynamically efficient truck-trailer units to re... Read More about Development of novel vehicle design modelling functions for quantifying vehicles’ shapes..