Dr Muhammad Younas' Outputs (3)

Effects of cutting conditions on the cutting forces in machining additively manufactured Ti6Al4V alloy. (2024)
Presentation / Conference Contribution
SAMBO, A.M., YOUNAS, M. and NJUGUNA, J. 2024. Effects of cutting conditions on the cutting forces in machining additively manufactured Ti6Al4V alloy. MATEC web of conferences [online], 401: proceedings of the 21st International conference on manufacturing research (ICMR 2024), 28-30 August 2024, Glasgow, UK, article number 06003. Available from: https://doi.org/10.1051/matecconf/202440106003

Machining of additive manufacturing (AM) process results in excessive consumption of the cutting power due to the high strength and hardness of the material produced that led to high cutting forces and short tool life during machining process. This p... Read More about Effects of cutting conditions on the cutting forces in machining additively manufactured Ti6Al4V alloy..

Assessment of machinability of Ti6Al4V alloy under dry conditions. (2024)
Presentation / Conference Contribution
YOUNAS, M., SAMBO, A.M., ASIM, T. and SAHARUDIN, S. 2024. Assessment of machinability of Ti6Al4V alloy under dry conditions. MATEC web of conferences [online], 401: proceedings of the 21st International conference on manufacturing research (ICMR 2024), 28-30 August 2024, Glasgow, UK, article number 06005. Available from: https://doi.org/10.1051/matecconf/202440106005

Titanium alloys pose significant challenges during machining, necessitates a thorough investigation into the impact of process parameters on machining Ti6Al4V alloy. This study investigates into the machinability of Ti6Al4V alloy under dry machining... Read More about Assessment of machinability of Ti6Al4V alloy under dry conditions..

Energy consumption analysis in turning Ti-6Al-4V alloy. (2020)
Presentation / Conference Contribution
JAFFERY, S.H.I., YOUNAS, M., KHAN, M. and ALI, L. 2020. Energy Consumption Analysis in Turning Ti-6Al-4V alloy. In Proceedings of the 11th IEEE (Institute of Electrical and Electronics Engineers) International conference on mechanical and intelligent manufacturing technologies 2020 (ICMIMT 2020), 20-22 January 2020, Cape Town, South Africa. Piscataway: IEEE [online], pages 18-21. Available from: https://doi.org/10.1109/ICMIMT49010.2020.9041194

One of the major concerns in manufacturing industries include the amount of energy consumed during machining processes. Therefore, the study of the specific energy during machining must be analyzed in relation to the process parameters (feed rate, sp... Read More about Energy consumption analysis in turning Ti-6Al-4V alloy..