Performance evaluation of (AlCrN) PVD-coated cBN inserts on machining of Inconel 718.

Jeyapandiarajan, P.; Xavior, M. Anthony; Anbalagan, Arivazhagan

Abstract

This research work focuses on the experimental investigations conducted using uncoated cBN tool and (AlCrN) PVD Coated cBN tool for turning Inconel 718. Two different sets of experiments – one with uncoated cBN and another with coated cBN inserts were conducted considering three different levels of cutting speeds, feed rates and depth of cuts. The performance of the coated cBN over the uncoated inserts were evaluated and it was found that the AlCrN coated cBN inserts can produce 10-12% drop in the cutting force, 15% reduction in the flank wear and 10% reduction in the surface roughness.

Citation

JEYAPANDIARAJAN, P., XAVIOR, M.A. and ANBALAGAN, A. 2021. Performance evaluation of (AlCrN) PVD-coated cBN inserts on machining of Inconel 718. MM science journal [online], 2021(November): proceedings of the 16th International conference on high speed machining (HSM 2021), 26-27 October 2021, Damstadt, Germany, pages 5219-5227. Available from: http://doi.org./10.17973/MMSJ.2021_11_2021178

• Presentation Conference Type: Conference Paper (published)
• Conference Name: 16th International conference on high speed machining (HSM 2021)
• Acceptance Date: Oct 26, 2021
• Online Publication Date: Nov 30, 2021
• Publication Date: Nov 30, 2021
• Deposit Date: Nov 25, 2021
• Publicly Available Date: Nov 25, 2021
• Journal: MM science journal
• Print ISSN: 1803-1269
• Electronic ISSN: 1805-0476
• Publisher: MM Science
• Peer Reviewed: Peer Reviewed
• Volume: 2021
• Issue: November
• Pages: 5219-5227
• DOI: https://doi.org/10.17973/mmsj.2021_11_2021178
• Keywords: Inconel 718; Machining; cBN; AlCrN PVD coatings; Wear; Surface roughness
• Public URL: https://rgu-repository.worktribe.com/output/1534750