Skip to main content

Research Repository

Advanced Search

Automated design and STEP-NC machining of impellers (2012)
Conference Proceeding
ARIVAZHAGAN, A., MEHTA, N.K. and JAIN, P.K. 2012. Automated design and STEP-NC matching of impellers. In Hinduja, S. and Li, L. (eds.) Proceedings of the 37th Manufacturing Automation and Systems Technology, Applications, Design, Organisation and Management, and Research (MATADOR) international conference 2012, 25-27 July 2012, Manchester, UK. London: Springer [online], article ID 2-6, pages 57-60. Available from: https://doi.org/10.1007/978-1-4471-4480-9_2

This paper presents the four stage approach followed for automated design and STEP-NC based machining of impellers. In the first stage, the design calculations are performed to construct the 'Meridional representation' of the radial impeller. Then 3D... Read More about Automated design and STEP-NC machining of impellers.

Integration of CAD/tool path data for 5-axis STEP-NC machining of free form/irrregular controured surfaces. (2010)
Conference Proceeding
ANBALAGAN, A. 2010. Integration of CAD/tool path for 5 axis STEP-NC machining of free form/irrregular contoured surfaces. In Katalinic, B. (ed.) Proceedings of 21st Danube Adria Association for Automation and Manufacturing (DAAAM) international symposium 2010: intelligent manufacturing and automation, 20-23 October 2010, Zadar, Croatia. Vienna: DAAAM International [online], article ID 617, pages 1233-1235. Available from: https://www.daaam.info/...0/24469_Symp_1_head.pdf

This research paper presents the work on feature recognition, tool path data generation and integration with STEP-NC (AP-238 format) for features having Free form/Irregular Contoured Surfaces(s) (FICS). Initially, the FICS features are modelled/impor... Read More about Integration of CAD/tool path data for 5-axis STEP-NC machining of free form/irrregular controured surfaces..

Feature recognition and tool path generation for 5 axis STEP-NC machining of free form/irregular contoured surfaces. (2010)
Conference Proceeding
ANBALAGAN, A. 2010. Feature recognition and tool path generation for 5 axis STEP-NC machining of free form/irregular contoured surfaces. In Katalinic, B. (ed.) Proceedings of 21st Danube Adria Association for Automation and Manufacturing (DAAAM) international symposium 2010: intelligent manufacturing and automation, 20-23 October 2010, Zadar, Croatia. Vienna: DAAAM International [online], article ID 618, pages 1235-1236. Available from: https://www.daaam.info/...0/24469_Symp_2_head.pdf

This research paper presents a five step algorithm to generate tool paths for machining Free form / Irregular Contoured Surface(s) (FICS) by adopting STEP-NC (AP-238) format. In the first step, a parametrized CAD model with FICS is created or importe... Read More about Feature recognition and tool path generation for 5 axis STEP-NC machining of free form/irregular contoured surfaces..