Skip to main content

Research Repository

Advanced Search

All Outputs (33)

Effect of slug characteristics on the nonlinear dynamic response of a long flexible fluid-conveying cylinder. (2024)
Journal Article
MEENAKUMARI, H.N.R., ZANGANEH, H. and HOSSAIN, M. 2024. Effect of slug characteristics on the nonlinear dynamic response of a long flexible fluid-conveying cylinder. Applied ocean research [online], 147, article number 103978. Available from: https://doi.org/10.1016/j.apor.2024.103978

Hydrocarbon flows in a marine riser may appear in multiple phases with varying flow patterns, among which, slug flows are known to exhibit complex flow characteristics due to fluctuations in multiphase mass, velocities, and pressure changes. Bulk of... Read More about Effect of slug characteristics on the nonlinear dynamic response of a long flexible fluid-conveying cylinder..

A comprehensive review on the potential of green hydrogen in empowering the low-carbon economy: development status, ongoing trends and key challenges. (2023)
Journal Article
ATTEYA, A.I., ALI, D., HOSSAIN, M. and SELLAMI, N. 2023. A comprehensive review on the potential of green hydrogen in empowering the low-carbon economy: development status, ongoing trends and key challenges. Green energy and environmental technology [online], 2. Available from: https://doi.org/10.5772/geet.23

Green hydrogen is currently considered a key element for delivering free-carbon energy. This paper provides an extensive assessment of the potential of green hydrogen technology as a pathway to the low-carbon economy while highlighting the major tech... Read More about A comprehensive review on the potential of green hydrogen in empowering the low-carbon economy: development status, ongoing trends and key challenges..

Analytical modelling of the hydraulic effect of hydrate deposition on transportability and plugging location in subsea gas pipelines. (2023)
Journal Article
UMUTEME, O.M., ISLAM, S.Z., HOSSAIN, M. and KARNIK, A. [2023]. Analytical modelling of the hydraulic effect of hydrate deposition on transportability and plugging location in subsea gas pipelines. Proceedings of the Institution of Mechanical Engineers, Part C: journal of mechanical engineering science [online], Online First. Available from: https://doi.org/10.1177/09544062231196986

Accurate prediction of the hydraulic effect of hydrate deposition and plug location is critical to the safety and operability of natural gas transport pipelines, especially for gas-dominant subsea pipelines where maintenance and intervention activiti... Read More about Analytical modelling of the hydraulic effect of hydrate deposition on transportability and plugging location in subsea gas pipelines..

Modelling hydrate deposition in gas-dominant subsea pipelines in operating and shutdown scenarios. (2023)
Journal Article
UMUTEME, O.M., ISLAM, S.Z., HOSSAIN, M. and KARNIK, A. 2023. Modelling hydrate deposition in gas-dominant subsea pipelines in operating and shutdown scenarios. Sustainability [online], 15(18), article number 13824. Available from: https://doi.org/10.3390/su151813824

This study addresses a significant research gap related to hydrate formation in subsea gas pipelines, with a specific focus on deposition rates during shutdown scenarios, which has received limited attention in previous studies. Past research has emp... Read More about Modelling hydrate deposition in gas-dominant subsea pipelines in operating and shutdown scenarios..

Computational fluid dynamics simulation of natural gas hydrate sloughing and pipewall shedding temperature profile: implications for CO2 transportation in subsea pipeline. (2023)
Journal Article
UMUTEME, O.M., ISLAM, S.Z., HOSSAIN, M. and KARNIK, A. 2023. Computational fluid dynamics simulation of natural gas hydrate sloughing and pipewall shedding temperature profile: implications for CO2 transportation in subsea pipeline. Gas science and engineering [online], 116, article number 205048. Available from: https://doi.org/10.1016/j.jgsce.2023.205048

The continuous flow assurance in subsea gas pipelines relies heavily on the assessment of temperature profile during hydrate sloughing and pipewall shedding caused by hydrates, with similar implications for carbon dioxide (CO2) transportation under h... Read More about Computational fluid dynamics simulation of natural gas hydrate sloughing and pipewall shedding temperature profile: implications for CO2 transportation in subsea pipeline..

Numerical investigations of a swirling two-phase air-water upward flow in straight and convergent vertical pipe. (2023)
Journal Article
MANIMARAN, R., KUMAR, M.S., KARUNAMURTHY, K. and HOSSAIN, M. 2023. Numerical investigations of a swirling two-phase air-water upward flow in straight and convergent vertical pipe. International journal of fluid mechanics research [online], 50(2), pages 31-57. Available from: https://doi.org/10.1615/InterJFluidMechRes.2023048031

In this paper, a numerical study is presented to analyze the flow parameters such as longitudinal and transverse velocities, hydrodynamic pressure, and volume fraction inside a vertical pipe. A vertical ascending swirl flow is established with the sp... Read More about Numerical investigations of a swirling two-phase air-water upward flow in straight and convergent vertical pipe..

Numerical prediction of the effect of thermal plume of a standing human on the airborne aerosol flow in a room: assessment of the social distancing rule. (2022)
Journal Article
HOSSAIN, M., CHINENYE-KANU, N., FAISAL, N.H., PRATHURU, A., ASIM, T. and BANIK, S. 2023. Numerical prediction of the effect of thermal plume of a standing human on the airborne aerosol flow in a room: assessment of the social distancing rule. Aerosol science and engineering [online], 7(1), pages 96-106. Available from: https://doi.org/https://doi.org/10.1007/s41810-022-00165-2

The purpose of the study is to investigate the dispersion of droplet nuclei/aerosol which are produced during coughing and continuous talking to quantify the risk of infection due to airborne disease transmission. A three-dimensional modelling of aer... Read More about Numerical prediction of the effect of thermal plume of a standing human on the airborne aerosol flow in a room: assessment of the social distancing rule..

Application of thermal spray coatings in electrolysers for hydrogen production: advances, challenges, and opportunities. (2022)
Journal Article
FAISAL, N.H., PRATHURU, A., AHMED, R. et al. 2022. Application of thermal spray coatings in electrolysers for hydrogen production: advances, challenges, and opportunities. ChemNanoMat [online], 8(12), article number e202200384. Available from: https://doi.org/10.1002/cnma.202200384

Thermal spray coatings have the advantage of providing thick and functional coatings from a range of engineering materials. The associated coating processes provide good control of coating thickness, morphology, microstructure, pore size and porosity... Read More about Application of thermal spray coatings in electrolysers for hydrogen production: advances, challenges, and opportunities..

Numerical analysis of a horizontal pressure differential wave energy converter. (2022)
Journal Article
RENGANATHAN, M. and HOSSAIN, M. 2022. Numerical analysis of a horizontal pressure differential wave energy converter. Energies [online], 15(20), articles 7513. Available from: https://doi.org/10.3390/en15207513

CFD modeling of an innovative wave energy device has been carried out in this study. OpenFoam wave modeling solver interFoam has been employed in order to investigate the energy extraction capability of the wave energy device. The innovative concept... Read More about Numerical analysis of a horizontal pressure differential wave energy converter..

An improved computational fluid dynamics (CFD) model for predicting hydrate deposition rate and wall shear stress in offshore gas-dominated pipeline. (2022)
Journal Article
UMUTEME, O.M., ISLAM, S.Z., HOSSAIN, M. and KARNIK, A. 2022. An improved computational fluid dynamics (CFD) model for predicting hydrate deposition rate and wall shear stress in offshore gas-dominated pipeline. Journal of natural gas science and engineering [online], 107, article 104800. Available from: https://doi.org/10.1016/j.jngse.2022.104800

Gas hydrates in pipelines is still a flow assurance problem in the oil and gas industry, and requires a proactive hydrate plugging risk predicting model. As an active area of research, this work has developed a 3D 10m length by 0.0204m diameter horiz... Read More about An improved computational fluid dynamics (CFD) model for predicting hydrate deposition rate and wall shear stress in offshore gas-dominated pipeline..

Investigation of the effects of pipe diameter of internal multiphase flow on pipe elbow vibration and resonance. (2022)
Journal Article
ASIEGBU, N.M., HOSSAIN, M., DROUBI, G.M. and ISLAM, S.Z. 2023. Investigation of the effects of pipe diameter of internal multiphase flow on pipe elbow vibration and resonance. Proceedings of the Institution of Mechanical Engineers, part E: journal of process mechanical engineering [online], 237(4), pages 1319-1330. Available from: https://doi.org/10.1177/09544089221115520

Computational fluid dynamics modelling of internal two-phase flow induced transient forces at 90° elbows have been carried out to evaluate the effect of pipe diameter on the characteristics of multiphase flow induced vibration. Simulations of two-pha... Read More about Investigation of the effects of pipe diameter of internal multiphase flow on pipe elbow vibration and resonance..

Mathematical model for heat transfer during laser material processing. (2022)
Journal Article
MOSTAFA, A. and HOSSAIN, M. 2022. Mathematical model for heat transfer during laser material processing. Advances in industrial and manufacturing engineering [online], 5, article 100087. Available from: https://doi.org/10.1016/j.aime.2022.100087

The article presents development of a new heat transfer model for calculating temperature distribution in porous and non-porous materials during laser cutting. The novelty of this model lies in incorporating melting and vaporisation progression of po... Read More about Mathematical model for heat transfer during laser material processing..

Computational fluid dynamics modelling of multiphase flows in double elbow geometries. (2021)
Journal Article
OGUNSESAN, O.A., HOSSAIN, M. and DROUBI, M.G. 2021. Computational fluid dynamics modelling of multiphase flows in double elbow geometries. Proceedings of the Institution of Mechanical Engineers, Part E: journal of process mechanical engineering [online], 235(6), pages 1835-1846. Available from: https://doi.org/10.1177/09544089211021744

This study investigates the effects of elbow on the transition and development of multiphase flow using computational fluid dynamics modelling techniques. The Eulerian - Multifluid VOF model coupled with an Interfacial Area Transport Equation has bee... Read More about Computational fluid dynamics modelling of multiphase flows in double elbow geometries..

Modeling aerosol cloud aerodynamics during human coughing, talking, and breathing actions. (2021)
Journal Article
HOSSAIN, M. and FAISAL, N.H. 2021. Modeling aerosol cloud aerodynamics during human coughing, talking, and breathing actions. AIP advances [online], 11(4), article 045111. Available from: https://doi.org/10.1063/5.0042952

In this paper, we investigate the aerosol cloud flow physics during three respiratory actions by humans (such as coughing, talking, and breathing). With given variables (i.e., velocity, duration, particle size and number of particles, and ambient con... Read More about Modeling aerosol cloud aerodynamics during human coughing, talking, and breathing actions..

Computational fluid dynamics modelling to design and optimise power kites for renewable power generation. (2020)
Journal Article
PEGG, C., SURI, Y., ISLAM, S.Z., ASTHANA, A. and HOSSAIN, M. 2020. Computational fluid dynamics modelling to design and optimise power kites for renewable power generation. International journal of design engineering [online], 9(2): energy and sustainable futures, pages 81-100. Available from: https://doi.org/10.1504/IJDE.2020.113057

Power kites provide the potential rewards of obtaining the disused energy supply from high altitude wind. This paper aims to provide a design of power kite and optimise the potential for renewable power generation. The power kite was modelled using c... Read More about Computational fluid dynamics modelling to design and optimise power kites for renewable power generation..

Effect of fracture roughness on the hydrodynamics of proppant transport in hydraulic fractures. (2020)
Journal Article
SURI, Y. ISLAM, S.Z. and HOSSAIN, M. 2020. Effect of fracture roughness on the hydrodynamics of proppant transport in hydraulic fractures. Journal of natural gas science and engineering [online], 80, article ID 103401. Available from: https://doi.org/10.1016/j.jngse.2020.103401

The effect of fracture roughness is investigated on proppant transport in hydraulic fractures using Joint Roughness Coefficient and a three-dimensional multiphase modelling approach. The equations governing the proppant transport physics in the fract... Read More about Effect of fracture roughness on the hydrodynamics of proppant transport in hydraulic fractures..

Proppant transport in dynamically propagating hydraulic fractures using CFD-XFEM approach. (2020)
Journal Article
SURI, Y., ISLAM, S.Z. and HOSSAIN, M. 2020. Proppant transport in dynamically propagating hydraulic fractures using CFD-XFEM approach. International journal of rock mechanics and mining sciences [online], 131, article ID 104356. Available from: https://doi.org/10.1016/j.ijrmms.2020.104356

Numerically modelling the fluid flow with proppant transport and fracture propagation together are one of the significant technical challenges in hydraulic fracturing of unconventional hydrocarbon reservoirs. The existing models either model the prop... Read More about Proppant transport in dynamically propagating hydraulic fractures using CFD-XFEM approach..

Numerical fluid flow modelling in multiple fractured porous reservoirs. (2020)
Journal Article
SURI, Y., ISLAM, S.Z., STEPHEN, K., DONALD, C., THOMPSON, M., DROUBI, M.G. and HOSSAIN, M. 2020. Numerical fluid flow modelling in multiple fractured porous reservoirs. Fluid dynamics and materials processing [online], 16(2), pages 245-266. Available from: https://doi.org/10.32604/fdmp.2020.06505

This paper compares the fluid flow phenomena occurring within a fractured reservoir for three different fracture models using computational fluid dynamics. The effect of the fracture-matrix interface condition is studied on the pressure and velocity... Read More about Numerical fluid flow modelling in multiple fractured porous reservoirs..

Numerical modelling of proppant transport in hydraulic fractures. (2020)
Journal Article
SURI, Y., ISLAM, S.Z. and HOSSAIN, M. 2020. Numerical modelling of proppant transport in hydraulic fractures. Fluid dynamics and materials processing [online], 16(2), pages 297-337. Available from: https://doi.org/10.32604/fdmp.2020.08421

The distribution of proppant injected in hydraulic fractures significantly affects the fracture conductivity and well performance. The proppant transport in thin fracturing fluid used during hydraulic fracturing in the unconventional reservoirs is co... Read More about Numerical modelling of proppant transport in hydraulic fractures..

Investigation of slug-churn flow induced transient excitation forces at pipe bend. (2019)
Journal Article
HOSSAIN, M., CHINENYE-KANU, N.M., DROUBI, G.M. and ISLAM, S.Z. 2019. Investigation of slug-churn flow induced transient excitation forces at pipe bend. Journal of fluids and structures [online], 91, article ID 102733. Available from: https://doi.org/10.1016/j.jfluidstructs.2019.102733

Numerical simulations of two-phase flow induced fluctuating forces at a pipe bend have been carried out to study the characteristics of multiphase flow induced vibration (FIV). The multiphase flow patterns and turbulence were modelled using the volum... Read More about Investigation of slug-churn flow induced transient excitation forces at pipe bend..