All Outputs (605)

Women in circuits and systems (WiCAS) and young professionals (YP) at ICECS 2020. (2021)
Journal Article
DI CAPUA, G., PAYVAND, M., COVI, E. and FOUGH, N. 2021. Women in circuits and systems (WiCAS) and young professionals (YP) at ICECS 2020. IEEE circuits and systems magazine [online], 21(2), pages 122-125. Available from: https://doi.org/10.1109/MCAS.2021.3071634

A 'Women in Circuits and Systems' (WiCAS) event and a 'Young Professionals' (YP) event took place during the 27th Institute of Electrical and Electronics Engineers (IEEE) International conference on electronics circuits and systems (ICECS), the flags... Read More about Women in circuits and systems (WiCAS) and young professionals (YP) at ICECS 2020..

Quality of surface texture and mechanical properties of PLA and PA-based material reinforced with carbon fibers manufactured by FDM and CFF 3D printing technologies. (2021)
Journal Article
SAHARUDIN, M.S., HAJNYS, J., KOZIOR, T., GOGOLEWSKI, D. and ZMARZŁY, P. 2021. Quality of surface texture and mechanical properties of PLA and PA-based material reinforced with carbon fibers manufactured by FDM and CFF 3D printing technologies. Polymers [online], 13(11), article 1671. Available from: https://doi.org/10.3390/polym13111671

The paper presents the results of mechanical tests of models manufactured with two 3D printing technologies, FDM and CFF. Both technologies use PLA or PA-based materials reinforced with carbon fibers. The work includes both uniaxial tensile tests of... Read More about Quality of surface texture and mechanical properties of PLA and PA-based material reinforced with carbon fibers manufactured by FDM and CFF 3D printing technologies..

Development of reaction kinetics model for the production of synthesis gas from dry methane reforming. (2021)
Journal Article
INAYAT, A., AHMAD, M.A.B., RAZA, M., GHENAI, C., NAQVI, S.R. and AYOUB, M. 2021. Development of reaction kinetics model for the production of synthesis gas from dry methane reforming. Bulletin of chemical reaction engineering and catalysis [online], 16(2), pages 440-445. Available from: https://doi.org/10.9767/bcrec.16.2.10510.440-445

The energy supply systems dependent on fossils and municipal solid waste (MSW) materials are primarily responsible for releasing greenhouse (GHG) gases and their related environmental hazards. The increasing amount of methane (CH4) and carbon dioxide... Read More about Development of reaction kinetics model for the production of synthesis gas from dry methane reforming..

Co-combustion of blends of coal and underutilised biomass residues for environmental friendly electrical energy production. (2021)
Journal Article
KANWAL, F., AHMED, A., JAMIL, F., RAFIQ, S., AYUB, H.M.U., GHAURI, M., KHURRAM, M.S., MUNIR, S., INAYAT, A., ABU BAKAR, M.S., MOOGI, S., LAM, S.S., and PARK, Y.-K. 2021. Co-combustion of blends of coal and underutilised biomass residues for environmental friendly electrical energy production. Sustainability [online], 13(9), article number 4881. Available from: https://doi.org/10.3390/su13094881

This study investigated the co-combustion of the blends of coal and biomass residues from poplar sawdust, rice husk, pine nut shells, and sunflower residues for ecofriendly energy production. Proximate and ultimate analyses and calorific values of th... Read More about Co-combustion of blends of coal and underutilised biomass residues for environmental friendly electrical energy production..

Mathematical modelling of a static concentrating photovoltaic: simulation and experimental validation. (2021)
Journal Article
MUHAMMAD-SUKKI, F., FAROOQ, H., ABU-BAKAR, S.H., ARDILA-REY, J.A., SELLAMI, N., KILPATRICK, C., MUHTAZARUDDIN, M.N., BANI, N.A. and ZULKIPLI, M. 2021. Mathematical modelling of a static concentrating photovoltaic: simulation and experimental validation. Applied sciences [online], 11(9), article 3894. Available from: https://doi.org/10.3390/app11093894

For the past twenty years, there has been increasing interest and investment in solar photovoltaic (PV) technology. One particular area of interest is the development of concentrating PV (CPV), especially for use in building integration. Many CPV des... Read More about Mathematical modelling of a static concentrating photovoltaic: simulation and experimental validation..

Experimental investigation of the displacement flow mechanism and oil recovery in primary polymer flood operations. (2021)
Journal Article
MAHON, R., OLUYEMI, G., OYENEYIN, B. and BALOGUN, Y. 2021. Experimental investigation of the displacement flow mechanism and oil recovery in primary polymer flood operations. SN applied sciences [online], 3(5), article 557. Available from: https://doi.org/10.1007/s42452-021-04360-7

Polymer flooding is a mature chemical enhanced oil recovery method employed in oilfields at pilot testing and field scales. Although results from these applications empirically demonstrate the higher displacement efficiency of polymer flooding over w... Read More about Experimental investigation of the displacement flow mechanism and oil recovery in primary polymer flood operations..

Modeling aerosol cloud aerodynamics during human coughing, talking, and breathing actions. (2021)
Journal Article
HOSSAIN, M. and FAISAL, N.H. 2021. Modeling aerosol cloud aerodynamics during human coughing, talking, and breathing actions. AIP advances [online], 11(4), article 045111. Available from: https://doi.org/10.1063/5.0042952

In this paper, we investigate the aerosol cloud flow physics during three respiratory actions by humans (such as coughing, talking, and breathing). With given variables (i.e., velocity, duration, particle size and number of particles, and ambient con... Read More about Modeling aerosol cloud aerodynamics during human coughing, talking, and breathing actions..

Drilling oil-based mud waste as a resource for raw materials: a case study on clays reclamation and their application as fillers in polyamide 6 composites. (2021)
Journal Article
SIDDIQUE, S., LEUNG, P.S. and NJUGUNA, J. 2021. Drilling oil-based mud waste as a resource for raw materials: a case study on clays reclamation and their application as fillers in polyamide 6 composites. Upstream oil and gas technology [online], 7, article ID 100036. Available from: https://doi.org/10.1016/j.upstre.2021.100036

To convert the hazardous oil-based mud waste into a resource, this study has addressed reclaimed nanoclays and its application as a filler material for reinforcing polyamide 6 polymer matrix into a novel polymer composite material. This work focuses... Read More about Drilling oil-based mud waste as a resource for raw materials: a case study on clays reclamation and their application as fillers in polyamide 6 composites..

Experimental investigation of the effect of temperature on two-phase oil-water relative permeability. (2021)
Journal Article
BALOGUN, Y., IYI, D., FAISAL, N., OYENEYIN, B., OLUYEMI, G. and MAHON, R. 2021. Experimental investigation of the effect of temperature on two-phase oil-water relative permeability. Journal of petroleum science and engineering [online], 203, article ID 108645. Available from: https://doi.org/10.1016/j.petrol.2021.108645

Relative permeability is affected by several flow parameters, mainly the operating temperature and fluid viscosity. Fluid viscosities change with temperature, which correspondingly affects the relative permeability. Temperature is believed to have a... Read More about Experimental investigation of the effect of temperature on two-phase oil-water relative permeability..

Flexible low-density polyethylene–BaTiO3 nanoparticle composites for monitoring leakage current in high-tension equipment. (2021)
Journal Article
GUPTA, R., BADEL, B., GUPTA, P., BUCKNALL, D.G., FLYNN, D. and PANCHOLI, K. 2021. Flexible low-density polyethylene–BaTiO3 nanoparticle composites for monitoring leakage current in high-tension equipment. ACS applied nano materials [online], 4(3), pages 2413-2422. Available from: https://doi.org/10.1021/acsanm.0c02719

Polymer–nanoparticle composites prepared using a low-density polyethylene (LDPE) matrix with BaTiO3 nanoparticle compositions of 6, 9, 12, and 15 wt % have shown insulating behavior and are evaluated for their applicability as flexible strain sensors... Read More about Flexible low-density polyethylene–BaTiO3 nanoparticle composites for monitoring leakage current in high-tension equipment..

Numerical modelling of the effect of wettability, interfacial tension and temperature on oil recovery at pore-scale level. (2021)
Journal Article
IYI, D., BALOGUN, Y., OYENEYIN, B. and FAISAL, N. 2021. Numerical modelling of the effect of wettability, interfacial tension and temperature on oil recovery at pore-scale level. Journal of petroleum science and engineering [online], 201, article ID 108453. Available from: https://doi.org/10.1016/j.petrol.2021.108453

A numerical investigation into the effect of wettability and temperature on oil recovery with a hot water injection at different temperatures is reported in this paper. The computational domain is a two-dimensional porous medium (reservoir) maintaine... Read More about Numerical modelling of the effect of wettability, interfacial tension and temperature on oil recovery at pore-scale level..

Impacts of lateral boundary condition resolution in tropical urban climate modelling for Kuala Lumpur. (2021)
Journal Article
ISA, N.A., SALLEH, S.A., WAN MOHD, W.M.N., OOI, M.C.G., CHAN, A. and ISLAM, M.A. 2021. Impacts of lateral boundary condition resolution in tropical urban climate modelling for Kuala Lumpur. Engineering journal [online], 25(1), pages 165-175. Available from: https://doi.org/10.4186/ej.2021.25.1.165

Choosing the best LBCs is still debated among researchers due to the errors resulted. However, several recommendations have been documented to control the errors propagated by LBCs. One of the recommendations is employing higher resolutions LBCs. In... Read More about Impacts of lateral boundary condition resolution in tropical urban climate modelling for Kuala Lumpur..

A flipped classroom: learning experiences in programming. (2021)
Journal Article
YONG, S.T., TIONG, K.M., CHAN, A. and KHIEW, P.S. 2021. A flipped classroom: learning experiences in programming. International journal of virtual and personal learning environments [online], 11(1), pages 23-37. Available from: https://doi.org/10.4018/IJVPLE.2021010102

This study explored students' perceptions of a flipped classroom for an introductory programming class. Students were required to watch video lectures and read lecture notes in advance (pre-class self-study) to prepare themselves for the in-class lec... Read More about A flipped classroom: learning experiences in programming..

Impact of layered and delaminated zeolites on catalytic fast pyrolysis of microalgae using fixed-bed reactor and Py-GC/MS. (2021)
Journal Article
NAQVI, S.R., NAQVI, M., INAYAT, A. and BLANCO-SANCHEZ, P. 2021. Impact of layered and delaminated zeolites on catalytic fast pyrolysis of microalgae using fixed-bed reactor and Py-GC/MS. Journal of analytical and applied pyrolysis [online], 155, article number 105025. Available from: https://doi.org/10.1016/j.jaap.2021.105025

The aim of this work is to exploit the pyrolysis characteristics of microalgae Botryococcus braunii (BB) with a medium pore framework zeolite (MCM-22) and its delaminated counterpart with a higher external surface area zeolite (ITQ-2) using pyrolysis... Read More about Impact of layered and delaminated zeolites on catalytic fast pyrolysis of microalgae using fixed-bed reactor and Py-GC/MS..

The innovative design of air caps for improving the thermal efficiency of CFB boilers. (2021)
Journal Article
LIU, X., ZHU, G., ASIM, T., ZHANG, Y. and MISHRA, R. 2021. The innovative design of air caps for improving the thermal efficiency of CFB boilers. Energy [online], 221, article ID 119844. Available from: https://doi.org/10.1016/j.energy.2021.119844

Air caps are an effective way of ensuring uniformity of air flow in Circulating Fluidized Bed (CFB) boilers. Published literature on the design and configuration of these air caps is severely limited. In this study, extensive theoretical as well as e... Read More about The innovative design of air caps for improving the thermal efficiency of CFB boilers..

Design of an environmental stress cracking (ESC) tester using fracture mechanics approach. (2021)
Journal Article
MOHAMAD NOR AZLI, M.S., MOHD RADZI, M.F., AHMAD NAZRI, M.N., SAHARUDIN, M.S. and INAM, F. 2021. Design of an environmental stress cracking (ESC) tester using fracture mechanics approach. Journal of mechanical engineering [online], 18(1), pages 123-136. Available from: https://jmeche.uitm.edu.my/wp-content/uploads/2021/01/8-RI-18-1-P20-50.pdf

In this research, an ESC tester machine was built by utilising a fracture mechanics approach. The machine consists of critical components such as an aluminium frame, 3D printed pulley and bracket, DC motor, Arduino microcontroller, and fasteners. The... Read More about Design of an environmental stress cracking (ESC) tester using fracture mechanics approach..

Development and analysis of tool wear and energy consumption maps for turning of titanium alloy (Ti6Al4V). (2021)
Journal Article
YOUNAS, M., JAFFERY, S.H.I., KHAN, A. and KHAN, M. 2021. Development and analysis of tool wear and energy consumption maps for turning of titanium alloy (Ti6Al4V). Journal of manufacturing processes [online], 62, pages 613-622. Available from: https://doi.org/10.1016/j.jmapro.2020.12.060

Machine tools are the main source of electric power consumption in industrial operations. Thus, in manufacturing, energy-efficient and cleaner production methods are preferred to mitigate production costs. Titanium alloys are known for their poor mac... Read More about Development and analysis of tool wear and energy consumption maps for turning of titanium alloy (Ti6Al4V)..

Computational fluid dynamics modelling to design and optimise power kites for renewable power generation. (2020)
Journal Article
PEGG, C., SURI, Y., ISLAM, S.Z., ASTHANA, A. and HOSSAIN, M. 2020. Computational fluid dynamics modelling to design and optimise power kites for renewable power generation. International journal of design engineering [online], 9(2): energy and sustainable futures, pages 81-100. Available from: https://doi.org/10.1504/IJDE.2020.113057

Power kites provide the potential rewards of obtaining the disused energy supply from high altitude wind. This paper aims to provide a design of power kite and optimise the potential for renewable power generation. The power kite was modelled using c... Read More about Computational fluid dynamics modelling to design and optimise power kites for renewable power generation..

Shock propagation behaviour and determination of Gruneisen state of equation for pultruded polyester/glass fibre-reinforced composites.   (2020)
Journal Article
MUKHERJI, A. and NJUGUNA, J. 2021. Shock propagation behaviour and determination of Gruneisen state of equation for pultruded polyester/glass fibre-reinforced composites. Composite structures [online], 262, article ID 113444. Available from: https://doi.org/10.1016/j.compstruct.2020.113444

Polyester fibres reinforced with glass fibres hybridised polyester resin composite (PFR/GFHC) is a unconventional complex high-molecular weight crosslinked network polymer composite. This novel composite can be used in the manufacture of structural b... Read More about Shock propagation behaviour and determination of Gruneisen state of equation for pultruded polyester/glass fibre-reinforced composites.  .

Sand failure: effect of biocide on the geomechanical properties of outcrop carbonate rock under static condition. (2020)
Journal Article
WUYEP, E., OLUYEMI, G., YATES, K. and AKISANYA, A.R. 2020. Sand failure: effect of biocide on the geomechanical properties of outcrop carbonate rock under static condition. Arabian journal of geosciences [online], 13(23), article ID 1239. Available from: https://doi.org/10.1007/s12517-020-06176-y

The effects of chemical interaction of a biocide with formation rocks on the rock geomechanical properties are examined. A combination of analytical tests (Scanning Electron Microscopy/Energy-Dispersive X-Ray Analysis, X-Ray Powder Diffraction and Pa... Read More about Sand failure: effect of biocide on the geomechanical properties of outcrop carbonate rock under static condition..