Dr Shahneel Saharudin's Outputs (23)

Advances in sustainable nanocomposites. (2023)
Journal Article
SAHARUDIN, M.S., ILYAS, R.A., AWANG, N., HASBI, S., SHYHA, I. and INAM, F. 2023. Advances in sustainable nanocomposites. Sustainability [online], 15(6), article number 5125. Available from: https://doi.org/10.3390/su15065125

Advances in Sustainable Nanocomposites is a newly opened Special Issue of Sustainability, which aims to publish original and review papers on the new scientific development of sustainable nanocomposite materials that are accelerated by zero-carbon po... Read More about Advances in sustainable nanocomposites..

Quality of surface texture and mechanical properties of PLA and PA-based material reinforced with carbon fibers manufactured by FDM and CFF 3D printing technologies. (2021)
Journal Article
SAHARUDIN, M.S., HAJNYS, J., KOZIOR, T., GOGOLEWSKI, D. and ZMARZŁY, P. 2021. Quality of surface texture and mechanical properties of PLA and PA-based material reinforced with carbon fibers manufactured by FDM and CFF 3D printing technologies. Polymers [online], 13(11), article 1671. Available from: https://doi.org/10.3390/polym13111671

The paper presents the results of mechanical tests of models manufactured with two 3D printing technologies, FDM and CFF. Both technologies use PLA or PA-based materials reinforced with carbon fibers. The work includes both uniaxial tensile tests of... Read More about Quality of surface texture and mechanical properties of PLA and PA-based material reinforced with carbon fibers manufactured by FDM and CFF 3D printing technologies..

Design of an environmental stress cracking (ESC) tester using fracture mechanics approach. (2021)
Journal Article
MOHAMAD NOR AZLI, M.S., MOHD RADZI, M.F., AHMAD NAZRI, M.N., SAHARUDIN, M.S. and INAM, F. 2021. Design of an environmental stress cracking (ESC) tester using fracture mechanics approach. Journal of mechanical engineering [online], 18(1), pages 123-136. Available from: https://jmeche.uitm.edu.my/wp-content/uploads/2021/01/8-RI-18-1-P20-50.pdf

In this research, an ESC tester machine was built by utilising a fracture mechanics approach. The machine consists of critical components such as an aluminium frame, 3D printed pulley and bracket, DC motor, Arduino microcontroller, and fasteners. The... Read More about Design of an environmental stress cracking (ESC) tester using fracture mechanics approach..

Performance optimisation of solid oxide electrolyser cell (SOEC) using response surface method (RSM) for thermal gradient reduction. (2025)
Journal Article
HASBI, S., AMBER, I., HOSSAIN, M. and SAHARUDIN, M.S. 2025. Performance optimisation of solid oxide electrolyser cell (SOEC) using response surface method (RSM) for thermal gradient reduction. International journal of sustainable energy [online], 43(1), article number 2482837. Available from: https://doi.org/10.1080/14786451.2025.2482837

The Solid Oxide Electrolyser Cell (SOEC) offers high-efficiency hydrogen production due to favourable thermodynamics and reaction kinetics at elevated temperatures. However, high operating temperatures increase energy consumption and thermal gradient... Read More about Performance optimisation of solid oxide electrolyser cell (SOEC) using response surface method (RSM) for thermal gradient reduction..

Transforming manufacturing quality management with cognitive twins: a data-driven, predictive approach to real-time optimization of quality. (2025)
Journal Article
ULLAH, A., YOUNAS, M. and SAHARUDIN, M.S. 2025. Transforming manufacturing quality management with cognitive twins: a data-driven, predictive approach to real-time optimization of quality. Journal of manufacturing and materials processing [online], 9(3), article number 79. Available from: https://doi.org/10.3390/jmmp9030079

In the ever-changing world of modern manufacturing, maintaining product quality is of great importance, yet extremely difficult due to complexities and the dynamic production paradigm. Currently, quality is rather reactively measured through periodic... Read More about Transforming manufacturing quality management with cognitive twins: a data-driven, predictive approach to real-time optimization of quality..

Numerical analysis and life cycle assessment of type V hydrogen pressure vessels. (2025)
Journal Article
SAHARUDIN, M.S., HASBI, S., SAHU, S.K., MA, Q. and YOUNAS, M. 2025. Numerical analysis and life cycle assessment of type V hydrogen pressure vessels. Journal of composites science [online], 9(2), article number 75. Available from: https://doi.org/10.3390/jcs9020075

The growing concern about greenhouse gas emissions and global warming has heightened the focus on sustainability across industrial sectors. As a result, hydrogen energy has emerged as a versatile and promising solution for various engineering applica... Read More about Numerical analysis and life cycle assessment of type V hydrogen pressure vessels..

Innovative and sustainable advances in polymer composites for additive manufacturing: processing, microstructure, and mechanical properties. (2025)
Journal Article
SAHARUDIN, M.S., ULLAH, A. and YOUNAS, M. 2025. Innovative and sustainable advances in polymer composites for additive manufacturing: processing, microstructure, and mechanical properties. Journal of manufacturing and materials processing [online], 9(2), article number 51. Available from: https://doi.org/10.3390/jmmp9020051

Additive manufacturing (AM) has revolutionised the production of customised components across industries such as the aerospace, automotive, healthcare, electronics, and renewable energy industries. Offering unmatched design freedom, reduced time-to-m... Read More about Innovative and sustainable advances in polymer composites for additive manufacturing: processing, microstructure, and mechanical properties..

Heat-responsive PLA/PU/MXene shape memory polymer blend nanocomposite: mechanical, thermal, and shape memory properties. (2025)
Journal Article
SANAKA, R., SAHU, S.K., SREEKANTH, P.S.R., GIRI, J., MOHAMMAD, F., AL-LOHEDAN, H.A., SAHARUDIN, M.S. and MA, Q. 2025. Heat-responsive PLA/PU/MXene shape memory polymer blend nanocomposite: mechanical, thermal, and shape memory properties. Polymers [online], 17(3), article 338. Available from: https://doi.org/10.3390/polym17030338

This study investigates the fabrication and characterization of heat-responsive PLA/PU/MXene shape memory polymer blend nanocomposites with varying PLA content (10, 20, 30, and 50%) and a fixed MXene content of 0.5 wt.%. The results indicate signific... Read More about Heat-responsive PLA/PU/MXene shape memory polymer blend nanocomposite: mechanical, thermal, and shape memory properties..

Digital twin framework using real-time asset tracking for smart flexible manufacturing system. (2025)
Journal Article
ULLAH, A., YOUNAS, M. and SAHARUDIN, M.S. 2025. Digital twin framework using real-time asset tracking for smart flexible manufacturing system. Machines [online], 13(1), article 37. Available from: https://doi.org/10.3390/machines13010037

This research article proposes a new method for an enhanced Flexible Manufacturing System (FMS) using a combination of smart methods. These methods use a set of three technologies of Industry 4.0, namely Artificial Intelligence (AI), Digital Twin (DT... Read More about Digital twin framework using real-time asset tracking for smart flexible manufacturing system..

Comparative analysis of mechanical response in epoxy nanocomposites reinforced with MXene and other carbon-based nano-fillers: an experimental and numerical study. (2024)
Journal Article
SAHARUDIN, M.S., HASBI, S., AHMAD, E.Z., SAGAR, S., DAOUSH, W.M. and INAM, F. 2024. Comparative analysis of mechanical response in epoxy nanocomposites reinforced with MXene and other carbon-based nano-fillers: an experimental and numerical study. Journal of advanced research in micro and nano engineering [online], 26(1), pages 54-65. Available from: https://doi.org/10.37934/armne.26.1.5465

This research introduces a finite element model tailored explicitly to assess the mechanical characteristics inherent in MXene/polymer nano-composite. The primary focus revolves around elucidating the performance attributes through numerical simulati... Read More about Comparative analysis of mechanical response in epoxy nanocomposites reinforced with MXene and other carbon-based nano-fillers: an experimental and numerical study..

Advanced functional materials based on nanocellulose/Mxene: a review. (2024)
Journal Article
AL-FAKIH, G.O.A., ILYAS, R.A., ATIQAH, A., ATIKAH, M.S.N., SAIDUR, R., DUFRESNE, A., SAHARUDIN, M.S., ABRAL, H. and SAPUAN, S.M. 2024. Advanced functional materials based on nanocellulose/Mxene: a review. International journal of biological macromolecules [online], 278(4), article number 135207. Available from: https://doi.org/10.1016/j.ijbiomac.2024.135207

The escalating need for a sustainable future has driven the advancement of renewable functional materials. Nanocellulose, derived from the abundant natural biopolymer cellulose, demonstrates noteworthy characteristics, including high surface area, cr... Read More about Advanced functional materials based on nanocellulose/Mxene: a review..

Optimizing DMF utilization for improved MXene dispersions in epoxy nanocomposites. (2024)
Journal Article
JANJUA, A.A., YOUNAS, M., ILYAS, R.A., SHYHA, I., FAISAL, N.H., INAM, F. and SAHARUDIN, M.S. 2024. Optimizing DMF utilization for improved MXene dispersions in epoxy nanocomposites. Journal of composites science [online], 8(9), article 340. Available from: https://doi.org/10.3390/jcs8090340

Dimethylformamide (DMF), a polar solvent, is commonly used for preparing graphene/epoxy nanocomposites. While previous research has commonly predominantly highlighted the improvement in physio-mechanical properties of these nanocomposites, the effect... Read More about Optimizing DMF utilization for improved MXene dispersions in epoxy nanocomposites..

Enhanced mechanical, thermal, and morphological properties of waste PET plastics reinforced with coated biodegradable kenaf fibers for infrastructure applications. (2024)
Journal Article
OWEN, M.M., WONG, L.S., ACHUKWU, E.O., SAHARUDIN, M.S. and AKIL, H.M. 2024. Enhanced mechanical, thermal, and morphological properties of waste PET plastics reinforced with coated biodegradable kenaf fibers for infrastructure applications. Construction and building materials [online], 442, article number 137659. Available from: https://doi.org/10.1016/j.conbuildmat.2024.137659

The surge in polyethylene terephthalate (PET) plastic bottle production has led to a rise in waste PET plastics. Recycling these waste PET plastics for infrastructural purposes offers a feasible solution to curb environmental pollution and the climat... Read More about Enhanced mechanical, thermal, and morphological properties of waste PET plastics reinforced with coated biodegradable kenaf fibers for infrastructure applications..

Design and fabrication of a wrist splint for burn patient rehabilitation using 3D printing technologies. (2023)
Journal Article
CANN, C. and SAHARUDIN, M.S. 2023. Design and fabrication of a wrist splint for burn patient rehabilitation using 3D printing technologies. Journal of physics: conference series [online], 2643: proceedings of the 8th International conference on applications and design in mechanical engineering 2023 (ICADME 2023), 4-5 September 2023, Kuala Lumpur, Malaysia, article 012003. Available from: https://doi.org/10.1088/1742-6596/2643/1/012003

Severe and common injuries involving burns to the hands and wrists can often lead to permanent loss of motion. The issue is exacerbated by the delicate nature of tendons and muscles in the hands, along with the formation of scar tissue. While rehabil... Read More about Design and fabrication of a wrist splint for burn patient rehabilitation using 3D printing technologies..

Carbon fibers/nickel nanocomposite particles reinforced ethylene vinyl acetate stretchable conductive polymer: fabrication, microstructure, electrical and mechanical properties. (2023)
Journal Article
DAOUSH, W.M., AL-ZUAIR, A.F., SAHARUDIN, M.S. and INAM, F. 2024. Carbon fibers/nickel nanocomposite particles reinforced ethylene vinyl acetate stretchable conductive polymer: fabrication, microstructure, electrical and mechanical properties. Carbon letters [online], 34(5), pages 1301-1316. Available from: https://doi.org/10.1007/s42823-023-00630-z

Carbon fibers of polyacrylonitrile (PAN) type were coated with nickel nanoparticles using a chemical reduction method in alkaline hydrazine bath. The carbon fibers were firstly heated at 400°C and then chemically treated in hydrochloric acid followed... Read More about Carbon fibers/nickel nanocomposite particles reinforced ethylene vinyl acetate stretchable conductive polymer: fabrication, microstructure, electrical and mechanical properties..

Development of coconut oil/capric acid eutectic phase change material with graphene as latent thermal energy storage. (2023)
Journal Article
HASBI, S., LEONG, K.Y., KU AHMAD, K.Z., ABDUL RAHIM, N. and SAHARUDIN, M.S. 2023. Development of coconut oil/capric acid eutectic phase change material with graphene as latent thermal energy storage. International journal of automotive and mechanical engineering [online], 20(1), pages 10247-10257. Available from: https://doi.org/10.15282/ijame.20.1.2023.07.0792

In this study, a eutectic mixture of coconut oil (CO)-capric acid (CA) was synthesised and investigated with the aim of producing newly eutectic phase change materials (PCMs) with improved thermal properties as thermal energy storage (TES). Although... Read More about Development of coconut oil/capric acid eutectic phase change material with graphene as latent thermal energy storage..

Carbon nanotubes after 30 years of research, development and commercialisation. (2022)
Journal Article
SAHARUDIN, M.S., SAGAR IQBAL, S. and INAM, F. [2022]. Carbon nanotubes after 30 years of research, development and commercialisation. Nanomedicine and nanotechnology journal [online], Rapid Release. Available from: https://www.scientificliterature.org/Nanomedicine/Nanomedicine-22-131.pdf

The commentary discusses the last three decades of research, development and successful commercialisation of Carbon Nanotubes (CNTs) and their related composites. Whilst the number of publications are on the decline and despite of major technical cha... Read More about Carbon nanotubes after 30 years of research, development and commercialisation..

The processing of epoxy/multi-layer graphene nanocomposites: effects of acetone on properties. (2019)
Journal Article
SAHARUDIN, M.S., HASBI, S., OKOLO, C., WEI, J. and JUSOH, A.R. 2019. The processing of epoxy/multi-layer graphene nanocomposites: effects of acetone on properties. Journal of engineering science and technology [online], 14(6), pages 3131-3142. Available from: https://tinyurl.com/57nrhehp

Epoxy/multi-layer graphene nanocomposites prepared with different acetone dosages (0 ml, 25 ml and 50 ml) were successfully produced. This study investigates the effectiveness of short-term dispersion and small dosages of acetone on the properties of... Read More about The processing of epoxy/multi-layer graphene nanocomposites: effects of acetone on properties..

The processing of epoxy/1 wt%-graphene nanocomposites: effects of ethanol on flexural properties. (2019)
Journal Article
SAHARUDIN, M.S., HASBI, S., ZULKIFLI, A. and ZAILANI, N.F. 2019. The processing of epoxy/1 wt%-graphene nanocomposites: effects of ethanol on flexural properties. International journal of innovative technology and exploring engineering [online], 9(1), pages 5440-5444. Available from: https://doi.org/10.35940/ijitee.A8105.119119

Four different types of nanocomposites were successfully produced using solution casting technique. Graphene was dispersed in four different ethanol concentrations; 0g, 1g, 2.5g, and 5g. In general, it can be observed that ethanol is an excellent age... Read More about The processing of epoxy/1 wt%-graphene nanocomposites: effects of ethanol on flexural properties..

Synergistic effects of halloysite and carbon nanotubes (HNTs + CNTs) on the mechanical properties of epoxy nanocomposites. (2019)
Journal Article
SAHARUDIN, M.S., ATIF, R., HASBI, S., NAZRI, M.N.A., SAIDIN, N.U. and ABDULLAH, Y. 2019. Synergistic effects of halloysite and carbon nanotubes (HNTs + CNTs) on the mechanical properties of epoxy nanocomposites. AIMS materials science [online], 6(6), pages 900-910. Available from: https://doi.org/10.3934/matersci.2019.6.900

The synergistic effects of halloysite nanotubes (HNTs) and carbon nanotubes (CNTs) on the mechanical properties of epoxy nanocomposites were investigated. The addition of hybrid nanofillers (0.5 wt% HNTs-0.5 wt% CNTs) has significantly increased the... Read More about Synergistic effects of halloysite and carbon nanotubes (HNTs + CNTs) on the mechanical properties of epoxy nanocomposites..