Outputs (85)

Structural and thermal degradation behaviour of reclaimed clay nano-reinforced low density polyethylene nanocomposites. (2019)
Journal Article
SIDDIQUE, S., SMITH, G.D., YATES, K., MISHRA, A.K., MATTHEWS, K., CSETENYI, L.J. and NJUGUNA, J. 2019. Structural and thermal degradation behaviour of reclaimed clay nano-reinforced low-density polyethylene nanocomposites. Journal of polymer research [online], 26, article ID 154. Available from: https://doi.org/10.1007/s10965-019-1802-9

In this study, a novel reclaimed clay nanofiller used to manufacture low-density polyethylene (LDPE)/Oil based mud fillers (OBMFs) nanocomposites by a melt compounding process. The mechanical testing samples were manufactured using injection mouldin... Read More about Structural and thermal degradation behaviour of reclaimed clay nano-reinforced low density polyethylene nanocomposites..

Influence of reduced graphene oxide on epoxy/carbon fibre-reinforced hybrid composite: flexural and shear properties under varying temperature conditions. (2019)
Journal Article
JENKINS, P., SIDDIQUE, S., KHAN, S., USMAN, A., STAROST, K., MACPHERSON, A., BARI, P., MISHRA, S. and NJUGUNA, J. 2019. Influence of reduced graphene oxide on epoxy/carbon fibre-reinforced hybrid composite: flexural and shear properties under varying temperature conditions. Advanced engineering materials [online], 21(6), article ID 1800614. Available from: https://doi.org/10.1002/adem.201800614

This study investigated the effectiveness of reduced graphene oxide as nanofiller in enhancing epoxy/carbon fibre-reinforced composite at varying temperature conditions. The graphene oxide was synthesised using modified Hummer’s method and then chemi... Read More about Influence of reduced graphene oxide on epoxy/carbon fibre-reinforced hybrid composite: flexural and shear properties under varying temperature conditions..

The crystallinity and thermal degradation behaviour of polyamide 6/oil based mud fillers (PA6/OBMFs) nanocomposites. (2018)
Journal Article
SIDDIQUE, S., KWOFFIE, L., ADDAE-AFOAKWA, K., YATES, K. and NJUGUNA, J. 2019. The crystallinity and thermal degradation behaviour of polyamide 6/oil based mud fillers (PA6/OBMFs) nanocomposites. Polymer degradation and stability [online], 159, pages 139-152. Available from: https://doi.org/10.1016/j.polymdegradstab.2018.11.004

The crystallinity and thermal degradation behaviours of Polyamide 6/Oil Based Mud Fillers (PA6/OBMFs) nanocomposites have been investigated using DSC and TGA. TGA indicates the onset decomposition temperature of D1/2 (half-decomposition) is 16º C hig... Read More about The crystallinity and thermal degradation behaviour of polyamide 6/oil based mud fillers (PA6/OBMFs) nanocomposites..

Mechanical structural design of a MEMS-based piezoresistive accelerometer for head injuries monitoring: a computational analysis by increments of the sensor mass moment of inertia. (2018)
Journal Article
MESSINA, M., NJUGUNA, J. and PALAS, C. 2018. Mechanical structural design of a MEMS-based piezoresistive accelerometer for head injuries monitoring: a computational analysis by increments of the sensor mass moment of inertia. Sensors [online], 18(1), article number 289. Available from: https://doi.org/10.3390/s18010289

This work focuses on the proof-mass mechanical structural design improvement of a tri-axial piezoresistive accelerometer specifically designed for head injuries monitoring where medium-G impacts are common; for example, in sports such as racing cars... Read More about Mechanical structural design of a MEMS-based piezoresistive accelerometer for head injuries monitoring: a computational analysis by increments of the sensor mass moment of inertia..

Removal of lead (II) from aqeouos waste using (CD-PCL-TiO2) bio-nanocomposites. (2017)
Journal Article
SEEMA, K.M., MAMBA, B.B., NJUGUNA, J., BAKHTIZIN, R.Z. and MISHRA, A.K. 2018. Removal of lead (II) from aqeouos waste using (CD-PCL-TiO2) bio-nanocomposites. International journal of biological macromolecules [online], 109, pages 136-142. Available from: https://doi.org/10.1016/j.ijbiomac.2017.12.046

Lead (Pb) pollution is our water system is a major concern, as this metal is toxic even at low concentration. This study aim to fabricate a bio-nanocomposite (cyclodextrin-polycaprolactone titanium dioxide) that will be used as an adsorbent for the r... Read More about Removal of lead (II) from aqeouos waste using (CD-PCL-TiO2) bio-nanocomposites..

Assessment of nanoparticles release into the environment during drilling of carbon nanotubes/epoxy and carbon nanofibres/epoxy nanocomposites. (2017)
Journal Article
STAROST, K., FRIJNS, E., VAN LAER, J., FAISAL, N., EGIZABAL, A., ELIZEXTEA, C., BLAZQUEZ, M., NELISSEN, I. and NJUGUNA, J. 2017. Assessment of nanoparticles release into the environment during drilling of carbon nanotubes/epoxy and carbon nanofibres/epoxy nanocomposites. Journal of hazardous materials [online], 340, pages 57-66. Available from: https://doi.org/10.1016/j.jhazmat.2017.06.057

The risk assessment, exposure and understanding of the release of embedded carbon nanotubes (CNTs) and carbon nanofibers (CNFs) from commercial high performance composites during machining processes is yet to be fully evaluated and quantified. In thi... Read More about Assessment of nanoparticles release into the environment during drilling of carbon nanotubes/epoxy and carbon nanofibres/epoxy nanocomposites..

The effect of nanosilica (SiO2) and nanoalumina (Al2O3) reinforced polyester nanocomposites on aerosol nanoparticle emissions into the environment during automated drilling. (2017)
Journal Article
STAROST, K., FRIJNS, E., VAN LAER, J., FAISAL, N., EGIZABAL, A., ELIZEXTEA, C., NEILSSEN, I., BALZQUEZ, M. and NJUGUNA, J. 2017. The effect of nanosilica (SiO2) and nanoalumina (Al2O3) reinforced polyester nanocomposites on aerosol nanoparticle emissions into the environment during automated drilling. Aerosol science and technology [online], 51(9), pages 1035-1046. Available from: https://doi.org/10.1080/02786826.2017.1330535

The aim of this study is to investigate the effect nanosilica and nanoalumina has on nanoparticle release from industrial nanocomposites due to drilling for hazard reduction whilst simultaneously obtaining the necessary mechanical performance. This s... Read More about The effect of nanosilica (SiO2) and nanoalumina (Al2O3) reinforced polyester nanocomposites on aerosol nanoparticle emissions into the environment during automated drilling..

Elaboration of properties of graphene oxide reinforced epoxy nanocomposites. (2017)
Journal Article
BARI, P., KHAN, S., NJUGUNA, J. and MISHRA, S. 2017. Elaboration of properties of graphene oxide reinforced epoxy nanocomposites. International journal of plastics technology [online], 21(1), pages 194-208. Available from: https://doi.org/10.1007/s12588-017-9180-9

In this research work, properties of graphene oxide (GO) based epoxy nanocomposites, prepared via the solution blending method, are elaborated. Different loadings (0.1-0.5 wt%) of GO were added into epoxy resin, and their effects were studied on thei... Read More about Elaboration of properties of graphene oxide reinforced epoxy nanocomposites..

Oil based drilling fluid waste: an overview on environmentally persistent pollutants. (2017)
Journal Article
SIDDIQUE, S., KWOFFIE, L., ADDAE-AFOAKWA, K., YATES, K. and NJUGUNA, J. 2016. Oil based drilling fluid waste: an overview on environmentally persistent pollutants. IOP conference series: materials science and engineering [online], 195: proceedings of the 3rd International conference on structural nano composites (NANOSTRUC 2016), 12-16 September 2016, Aberdeen, UK, article number 012008. Available from: https://doi.org/10.1088/1757-899X/195/1/012008

Operational discharges of spent drilling fluid, produced water, and accumulated drill cuttings from oil and gas industry are a continuous point source of environmental pollution. To meet the strict environmental standard for waste disposal, oil and g... Read More about Oil based drilling fluid waste: an overview on environmentally persistent pollutants..

Tensile and flexural properties of hybrid graphene oxide/epoxy carbon fibre reinforced composites. (2017)
Journal Article
WATSON, G., STAROST, K., BARI, P., FAISAL, N., MISHRA, S. and NJUGUNA, J. 2016. Tensile and flexural properties of hybrid graphene oxide/epoxy carbon fibre reinforced composites. IOP conference series: materials science and engineering [online], 195: proceedings of the 3rd International conference on structural nano composites (NANOSTRUC 2016), 12-16 September 2016, Aberdeen, UK, article number 012009. Available from: https://doi.org/10.1088/1757-899X/195/1/012009

In this study, nano-sized graphene oxide sheets were homogenously dispersed via sonication methods in epoxy followed by vacuum resin infusion for the fabrication of the epoxy, graphene oxide (GO) and micro-sized carbon fibre reinforced nanocomposites... Read More about Tensile and flexural properties of hybrid graphene oxide/epoxy carbon fibre reinforced composites..