Outputs (1239)

Nanomechanical and structural characteristics of nanodiamond composite films dependent on target-substrate distance. (2024)
Journal Article
EGIZA, M., DIAB, M.R., MURASAWA, K., NARAGINO, H. and YOSHITAKE, T. [2024]. Nanomechanical and structural characteristics of nanodiamond composite films dependent on target-substrate distance. Arabian journal for science and engineering [online], Latest Articles. Available from: https://doi.org/10.1007/s13369-024-09161-9

This study explores the optimization of target-substrate distance (TSD) in coaxial arc plasma deposition technique for depositing nanodiamond composite (NDC) films on unheated WC–Co substrates, with a focus on enhancing properties relevant to cutting... Read More about Nanomechanical and structural characteristics of nanodiamond composite films dependent on target-substrate distance..

Thermal spray coatings for molten salt facing structural parts and enabling opportunities for thermochemical cycle electrolysis. (2024)
Journal Article
FAISAL, N.H., RAJENDRAN, V., PRATHURU, A., HOSSAIN, M., MUTHUKRISHNAN, R., BALOGUN, Y., PANCHOLI, K., HUSSAIN, T., LOKACHARI, S., HORRI, B.A. and BANKHEAD, M. 2024. Thermal spray coatings for molten salt facing structural parts and enabling opportunities for thermochemical cycle electrolysis. Engineering reports [online], Early View. Available from: https://doi.org/10.1002/eng2.12947

Thermochemical water splitting stands out as the most efficient techniques to produce hydrogen through electrolysis at a high temperature, relying on a series of chemical reactions within a loop. However, achieving a durable thermochemical cycle sys... Read More about Thermal spray coatings for molten salt facing structural parts and enabling opportunities for thermochemical cycle electrolysis..

Surface area‐enhanced cerium and sulfur‐modified hierarchical bismuth oxide nanosheets for electrochemical carbon dioxide reduction to formate. (2024)
Journal Article
PALANTIMUTHU, N., SUBRAMANIAM, M.R., P, M.A., SHARMA, P.K., RAMALINGAM, V., PERAMAIAH, K., RAMAKRISHNAN, S., GU, G.H., YU, E.H. and YOO, D.J. 2024. Surface area-enhanced cerium and sulfur-modified hierarchical bismuth oxide nanosheets for electrochemical carbon dioxide reduction to formate. Small [online], Early View. Available from: https://doi.org/10.1002/smll.202400913

Electrochemical carbon dioxide reduction reaction (ECO2RR) is a promising approach to synthesize fuels and value-added chemical feedstocks while reducing atmospheric CO2 levels. Here, high surface area cerium and sulfur-doped hierarchical bismuth oxi... Read More about Surface area‐enhanced cerium and sulfur‐modified hierarchical bismuth oxide nanosheets for electrochemical carbon dioxide reduction to formate..

Unveiling a 72.5 GPa peak hardness in sustainable nanodiamond composite hard coatings via discharge energy control: a nanoindentation-Raman approach. (2024)
Journal Article
EGIZA, M., DIAB, M.R., ATTA, H., ABDELFATAH, M.M., EL-SHAER, A. and YOSHITAKE, T. 2024. Unveiling a 72.5 GPa peak hardness in sustainable nanodiamond composite hard coatings via discharge energy control: a nanoindentation-Raman approach. Materials letters [online], 369, article number 136684. Available from: https://doi.org/10.1016/j.matlet.2024.136684

Sustainable nanodiamond composite (NDC) films hold promise for high-performance hard coatings thanks to coaxial arc plasma deposition (CAPD). This eco-friendly technique eliminates the need for external heating, chemical reactions, or Co substrate pr... Read More about Unveiling a 72.5 GPa peak hardness in sustainable nanodiamond composite hard coatings via discharge energy control: a nanoindentation-Raman approach..

Tracking and estimation of surgical tool relative-pose and angle based on the vision system for surgical robot. (2024)
Presentation / Conference
MUTHUKRISHNAN, R., KANNAN, S., ZHAO, Y. and PRABHU, R. 2024. Tracking and estimation of surgical tool relative-pose and angle based on the vision system for sugical robot. Poster presented at the 3rd Medical device manufacturing centre annual conference 2024 (MDMC 2024), 23 May 2024, Glasgow, UK.

This research presents a Virtual Dynamic Tri crossbar and a Virtual Stable Graph (VDT VSG) which simplifies the task of tracing the needle angle and location in 2 D plane. In addition, Virtual Dynamic Line (helps to quantify the displacement between... Read More about Tracking and estimation of surgical tool relative-pose and angle based on the vision system for surgical robot..

Effects of CO2 geosequestration on opalinus clay. (2024)
Journal Article
ASIM, T. and HAWEZ, H.K. 2024. Effects of CO2 geosequestration on opalinus clay. Energies [online], 17(10), article number 2431. Available from: https://doi.org/10.3390/en17102431

CO2 geosequestration is an important contributor to United Nations Sustainable Development Goal 13, i.e., Climate Action, which states a global Net-Zero CO2 emissions by 2050. A potential impact of CO2 geosequestration in depleted oil and gas reservo... Read More about Effects of CO2 geosequestration on opalinus clay..

Wear-resistant and adherent nanodiamond composite thin film for durable and sustainable silicon carbide mechanical seals. (2024)
Journal Article
EGIZA, M., DIAB, M.R., ZIA, A.W., MURASAWA, K., FAISAL, N. and YOSHITAKE, T. 2024. Wear-resistant and adherent nanodiamond composite thin film for durable and sustainable silicon carbide mechanical seals. Wear [online], 550-551, article number 205394. Available from: https://doi.org/10.1016/j.wear.2024.205394

In response to environmental concerns, there is a growing demand for durable and sustainable mechanical seals, particularly in high-risk industries like chemical, petroleum, and nuclear sectors. This work proposes augmenting the durability and sustai... Read More about Wear-resistant and adherent nanodiamond composite thin film for durable and sustainable silicon carbide mechanical seals..

Formation integrity evaluation for geosequestration of CO2 in depleted petroleum reservoirs under cyclic stress conditions. (2024)
Journal Article
AMINAHO, E.N., HOSSAIN, M., FAISAL, N.H. and SANAEE, R. 2024. Formation integrity evaluation for geosequestration of CO2 in depleted petroleum reservoirs under cyclic stress conditions. Geoenergy science and engineering [online], 238, article 212892. Available from: https://doi.org/10.1016/j.geoen.2024.212892

The geological storage of carbon dioxide (CO2), also referred to as CO2 geosequestration, represents one of the most promising options for reducing greenhouse gases in the atmosphere. However, most of the time, CO2 is captured with small amounts of o... Read More about Formation integrity evaluation for geosequestration of CO2 in depleted petroleum reservoirs under cyclic stress conditions..

Impact of regional pressure dissipation on carbon capture and storage projects: a comprehensive review. (2024)
Journal Article
HAWEZ, H.K. and ASIM, T. 2024. Impact of regional pressure dissipation on carbon capture and storage projects: a comprehensive review. Energies [online], 17(8), article number 1889. Available from: https://doi.org/10.3390/en17081889

Carbon capture and storage (CCS) is a critical technology for mitigating greenhouse gas emissions and combating climate change. CCS involves capturing CO2 emissions from industrial processes and power plants and injecting them deep underground for lo... Read More about Impact of regional pressure dissipation on carbon capture and storage projects: a comprehensive review..

Investigation of tool wear and energy consumption in machining Ti6Al4V alloy with uncoated tools. (2024)
Journal Article
YOUNAS, M., KHAN, M., JAFFERY, S.H.I., KHAN, Z. and KHAN, N. 2024. Investigation of tool wear and energy consumption in machining Ti6Al4V alloy with uncoated tools. International journal of advanced manufacturing technology [online], 132(7-8), pages 3785-3799. Available from: https://doi.org/10.1007/s00170-024-13548-1

This research studies the energy consumption and wear mechanism of carbide cutting tools in dry machining of Ti6Al4V alloy. In the first phase of experiments, full factorial design experiments were employed to study the tool wear rate (R) and specifi... Read More about Investigation of tool wear and energy consumption in machining Ti6Al4V alloy with uncoated tools..