Outputs (18)

Measuring residual strain and stress in thermal spray coatings using neutron diffractometers. (2021)
Journal Article
FAISAL, N.H., AHMED, R., PRATHURU, A.K., PARADOWSKA, A. and LEE, T.L. 2022. Measuring residual strain and stress in thermal spray coatings using neutron diffractometers. Experimental mechanics [online], 62(3), pages 369-392. Available from: https://doi.org/10.1007/s11340-021-00803-9

Background: During thermal spray coating, residual strain is formed within the coating and substrates due to thermo-mechanical processes and microstructural phase changes. Objective: This paper provides a comprehensive guide to researchers planning t... Read More about Measuring residual strain and stress in thermal spray coatings using neutron diffractometers..

Computational fluid dynamics modelling of multi-phase flow transition in presence of solid particles. (2021)
Thesis
ALAITA, D.A. 2021. Computational fluid dynamics modelling of multi-phase flow transition in presence of solid particles. Robert Gordon University, PhD thesis. Hosted on OpenAIR [online]. Available from: https://doi.org/10.48526/rgu-wt-1603672

Multi-phase flow is the type of flow common in the oil and gas industry, as oil reservoirs contain mixtures of oil, gas and water with sand particles from sandstone reservoirs. Accurate design of oil and gas production equipment greatly depends on de... Read More about Computational fluid dynamics modelling of multi-phase flow transition in presence of solid particles..

Strain monitoring. (2021)
Book Chapter
VANLANDUIT, S., SORGENTE, M., ZADEH, A.R., GÜEMES, A. and FAISAL, N. 2021. Strain monitoring. In Sause, M.G.R. and Jasiūnienė, E. (eds.) Structural health monitoring damage detection systems for aerospace. Springer aerospace technology. Cham: Springer [online], chapter 8, pages 219-241. Available from: https://doi.org/10.1007/978-3-030-72192-3_8

This chapter provides an overview of the use of strain sensors for structural health monitoring. Compared to acceleration-based sensors, strain sensors can measure the deformation of a structure at very low frequencies (up to DC) and enable the measu... Read More about Strain monitoring..

Defect types. (2021)
Book Chapter
FAISAL, N., CORA, Ö.N., BEKCI, M.L., ŚLIWA, R.E., STERNBERG, Y., PANT, S., DEGENHARDT, R. and PRATHURU, A. 2021. Defect types. In Sause, M.G.R. and Jasiūnienė, E. (eds.) Structural health monitoring damage detection systems for aerospace. Springer aerospace technology. Cham: Springer [online], chapter 3, pages 15-72. Available from: https://doi.org/10.1007/978-3-030-72192-3_3

This chapter provides an overview of the common types of defects found in various structural materials and joints in aircraft. Materials manufacturing methods (including large-scale production) have been established in the aircraft industry. However,... Read More about Defect types..

Defect detection and condition assessment of adhesively-bonded joints using acoustic emission techniques. (2021)
Thesis
CRAWFORD, A.R. 2021. Defect detection and condition assessment of adhesively-bonded joints using acoustic emission techniques. Robert Gordon University, PhD thesis. Hosted on OpenAIR [online]. Available from: https://doi.org/10.48526/rgu-wt-1603651

The aim of this study is to investigate the application of acoustic emission (AE) techniques to the defect detection and monitoring of adhesively-bonded joints. Pencil Lead Breaks (PLBs) have been used as a simulated AE source to experimentally inves... Read More about Defect detection and condition assessment of adhesively-bonded joints using acoustic emission techniques..

A critical review on coupled geomechanics and fluid flow in naturally fractured reservoirs. (2021)
Journal Article
HAWEZ, H.K., SANAEE, R. and FAISAL, N.H. 2021. A critical review on coupled geomechanics and fluid flow in naturally fractured reservoirs. Journal of natural gas science and engineering [online], 95, article 104150. Available from: https://doi.org/10.1016/j.jngse.2021.104150

Naturally fractured reservoirs have been a source of challenging issues with regard to field development, well stability, drilling, and enhanced oil recovery, as a connected fracture system can totally dominate the flow patterns. Because of the high... Read More about A critical review on coupled geomechanics and fluid flow in naturally fractured reservoirs..

The impact of thermal ageing on sealing performance of HNBR packing elements in downhole installations in oilfield wellhead applications. (2021)
Journal Article
HASSANI, F., FAISAL, N.H., NISH, R., ROTHNIE, S. and NJUGUNA, J. 2022. The impact of thermal ageing on sealing performance of HNBR packing elements in downhole installations in oilfield wellhead applications. Journal of petroleum science and engineering [online], 208(part B), article 109200. Available from: https://doi.org/10.1016/j.petrol.2021.109200

Hydrogenated nitrile butyl rubber (HNBR) elastomers are highly resistant to chemicals and degradation, and they are good candidates to be adopted in aggressive environmental conditions of high temperature and pressure. As these service parameters are... Read More about The impact of thermal ageing on sealing performance of HNBR packing elements in downhole installations in oilfield wellhead applications..

Large scale manufacturing route to metamaterial coatings using thermal spray techniques and their response to solar radiation. [Dataset] (2021)
Dataset
FAISAL, N.H., SELLAMI, N., VENTURI, F., HUSSAIN, T., MALLICK, T., MUHAMMAD-SUKKI, F., BISHOP, A., UPADHYAYA, H., KATIYAR, N.K. and GOEL, S. 2021. Large scale manufacturing route to metamaterial coatings using thermal spray techniques and their response to solar radiation. [Dataset]. Hosted on OpenAIR [online]. Available from: https://doi.org/10.48526/rgu-wt-1369280

Metamaterials, an artificial periodic two- or three-dimensional configuration can change propagation characteristics of electromagnetic waves (i.e., reflection, transmission, absorption). The current challenges in the field of metamaterial coatings a... Read More about Large scale manufacturing route to metamaterial coatings using thermal spray techniques and their response to solar radiation. [Dataset].

Large scale manufacturing route to metamaterial coatings using thermal spray techniques and their response to solar radiation. (2021)
Journal Article
FAISAL, N.H., SELLAMI, N., VENTURI, F., HUSSAIN, T., MALLICK, T., MUHAMMAD-SUKKI, F., BISHOP, A., UPADHYAYA, H., KATIYAR, N.K. and GOEL, S. 2021. Large scale manufacturing route to metamaterial coatings using thermal spray techniques and their response to solar radiation. Emergent materials [online], 4(6), pages 1619-1633. Available from: https://doi.org/10.1007/s42247-021-00252-z

Metamaterials, an artificial periodic two- or three-dimensional configuration can change propagation characteristics of electromagnetic waves (i.e., reflection, transmission, absorption). The current challenges in the field of metamaterial coatings a... Read More about Large scale manufacturing route to metamaterial coatings using thermal spray techniques and their response to solar radiation..

Investigating the influence of the core material on the mechanical performance of a nitinol wire wrapped helical auxetic yarn. (2021)
Journal Article
FAISAL, N.H., FOWLIE, A., CONNELL, J., MACKENZIE, S., NOBLE, R. and PRATHURU, A.K. 2022. Investigating the influence of the core material on the mechanical performance of a nitinol wire wrapped helical auxetic yarn. Journal of strain analysis for engineering design [online], 57(5), pages 377-391. Available from: https://doi.org/10.1177/03093247211027085

Helical Auxetic Yarns (HAYs) can be used in a variety of applications, from healthcare to blast and impact resistance. This work focuses on the effect of the use of different core materials (e.g. rubber, polyurethane, polytetrafluoroethylene/teflon,... Read More about Investigating the influence of the core material on the mechanical performance of a nitinol wire wrapped helical auxetic yarn..