Outputs (48)

Characterization of synthesized polyurethane/montmorillonite nanocomposites foams. (2014)
Journal Article
ANSARI, F., SACHSE, S., MICHALOWSKI, S., KAVOSH, M., PIELICHOWSKI, K. and NJUGUNA, J. 2014. Characterization of synthesized polyurethane/montmorillonite nanocomposite foams. IOP conference series: materials science and engineering [online], 64(1), Article 012039. Available from: https://doi.org/10.1088/1757-899X/64/1/012039

Nanophased hybrid composites based on polyurethane/montmorillonite (PU/MMT) have been fabricated. The nanocomposite which was formed by the addition of a polyol premix with 4,4′-diphenylmethane diisocyanate to obtain nanophased polyurethane foams whi... Read More about Characterization of synthesized polyurethane/montmorillonite nanocomposites foams..

Highly transparent and luminescent nanostructured Eu203 doped ZnO films. (2014)
Journal Article
SREEDHARAN, R.S., GANASAN, V., SUDARSANAKUMAR, C., PRABHU, R. and PILLAI, V.P.M., 2014. Highly transparent and luminescent nanostructured Eu203 doped ZnO films. IOP conference series: materials science and engineering [online], 64, Article 012027. Available from: https://doi.org/10.1088/1757-899X/64/1/012027

Zinc oxide is a wide, direct band gap II-VI oxide semiconductor. Pure and Eu-doped ZnO films are prepared by RF Magnetron sputtering at different doping concentrations (0.5, 1, 3 and 5 wt %). The films are annealed at 500 0C in air for two hours. The... Read More about Highly transparent and luminescent nanostructured Eu203 doped ZnO films..

Investigations on surface wettability of ZnO nanowires using UV LEDs for biosensing applications. (2014)
Journal Article
BHAVSAR, K., PRABHU, R. and POLLARD, P. 2014. Investigations on surface wettability of ZnO nanowires using UV LEDs for biosensing applications. IOP conference series: materials science and engineering [online], 64, Article 012033. Available from: https://doi.org/10.1088/1757-899X/64/1/012033

ZnO is a biocompatible material suitable for biosensors and microfluidic devices. Nanowires of ZnO tend to show hydrophobic nature which decelerates the adhesion/adsorption of biomolecules on the surface. This paper discusses the investigations on tu... Read More about Investigations on surface wettability of ZnO nanowires using UV LEDs for biosensing applications..

Waste to want: polymer nanocomposites using nanoclays extracted from oil based drilling mud waste. (2014)
Journal Article
ADEGBOTOLU, U.V., NJUGUNA, J., POLLARD, P. and YATES, K. 2014. Waste to want: polymer nanocomposites using nanoclays extracted from oil based drilling mud waste. IOP conference series: materials science and engineering [online], 64, Article 012023. Available from: https://doi.org/10.1088/1757-899X/64/1/012023

Due to the European Union (EU) waste frame work directive (WFD), legislations have been endorsed in EU member states such as UK for the Recycling of wastes with a vision to prevent and reduce landfilling of waste. Spent oil based drilling mud (drilli... Read More about Waste to want: polymer nanocomposites using nanoclays extracted from oil based drilling mud waste..

Experimental study of gas flux characteristics in a CO2 selective silica based modified membrane. (2014)
Journal Article
NWOGU, N.C., KAJAMA, M.N. and GOBINA, E. 2014. Experimental study of gas flux characteristics in a CO2 selective silica based modified membrane. International journal of advanced research in engineering and technology (IJARET) [online], 5(8), pages 1-9. Available from: http://www.iaeme.com/MasterAdmin/Journal_uploads/IJARET/VOLUME_5_ISSUE_8/IJARET_05_08_001.pdf

The purpose of membrane gas separation for CO2 capture from flue gas process is to reduce greenhouse emissions as well as associated environmental challenges globally. This study looks at gas separation in a single gas permeation experiment using CO2... Read More about Experimental study of gas flux characteristics in a CO2 selective silica based modified membrane..

Mechanical and impact performance of three-phase polyamide 6 nanocomposites. (2014)
Journal Article
GENDRE, L., NJUGUNA, J., ABHYANKAR, H. and ERMINI, V. 2015. Mechanical and impact performance of three-phase polyamide 6 nanocomposites. Materials and design [online], 66(Part B), pages 486-491. Available from: https://doi.org/10.1016/j.matdes.2014.08.005

In this work, three-phase nanocomposites using multiscale reinforcements were studied to evaluate the influence of nanofillers on static and dynamic mechanical properties at varying temperature conditions. In particular, short-fibres reinforced polya... Read More about Mechanical and impact performance of three-phase polyamide 6 nanocomposites..

Too enthusiastic to care for safety: present status and recent developments of nanosafety in ASEAN countries. (2014)
Journal Article
KARIM, M.E., MUNIR, A.B., REZA, A.W., MUHAMMAD-SUKKI, F., YASIN, S.H.M., ABU-BAKAR, S.H. and RAHIM, R.A. 2015. Too enthusiastic to care for safety: present status and recent developments of nanosafety in ASEAN countries. Technological forecasting and social change [online], 92, pages 168-181. Available from: https://doi.org/10.1016/j.techfore.2014.07.003

Nanotechnology has the prospect to vibrate the imagination of human being and has the ability to be used in almost every sector of human need. With its limitless potentials, there are many environmental, health and safety related concerns due to extr... Read More about Too enthusiastic to care for safety: present status and recent developments of nanosafety in ASEAN countries..

Significance of effective lubrication in mitigating system failures: a wind turbine gearbox case study. (2014)
Journal Article
SINHA, Y., STEEL, J.A., ANDRAWUS, J.A. and GIBSON, K. 2014. Significance of effective lubrication in mitigating system failures: a wind turbine gearbox case study. Wind engineering [online], 38(4), pages 441-449. Available from: https://doi.org/10.1260/0309-524x.38.4.441

The effectiveness of lubrication in machines mainly depends on the physical and chemical properties of lubricating oil, like quantity, level of suspended particles, effect of external load/shear forces, temperature amongst others. Periodic inspection... Read More about Significance of effective lubrication in mitigating system failures: a wind turbine gearbox case study..

Thermo-mechanical performance of poly(lactic acid)/flax fibre-reinforced biocomposites. (2014)
Journal Article
NASSIOPOULOS, E. and NJUGUNA, J. 2015. Thermo-mechanical performance of poly(lactic acid)/flax fibre-reinforced biocomposites. Materials and design [online], 66(Part B), pages 473-485. Available from: https://doi.org/10.1016/j.matdes.2014.07.051

In this study, the thermo-mechanical performance of flax fibre reinforced poly lactic acid (PLA) biocomposites was investigated for the potential use in load bearing application such as body-in-white and body structures in the automotive sector. Focu... Read More about Thermo-mechanical performance of poly(lactic acid)/flax fibre-reinforced biocomposites..

An improved Vickers indentation fracture toughness model to assess the quality of thermally sprayed coatings. (2014)
Journal Article
FAISAL, N.H., AHMED, R., PRATHURU, A.K., SPENCE, S., HOSSAIN, M. and STEEL, J.A. 2014. An improved Vickers indentation fracture toughness model to assess the quality of thermally sprayed coatings. Engineering fracture mechanics [online], 128, pages 189-204. Available from: https://doi.org/10.1016/j.engfracmech.2014.07.015

This study presents an improved approach to the quality assessment of thermally sprayed coatings. Measurements were carried out on five different coatings. Since it is the overall extent of surface cracking during Vickers indentation that is indicati... Read More about An improved Vickers indentation fracture toughness model to assess the quality of thermally sprayed coatings..