Skip to main content

Research Repository

See what's under the surface

Experimental investigation on micro milling of polyester/halloysite nano-clay nanocomposites.

Fu, Guoyu; Huo, Dehong; Shyha, Islam; Pancholi, Ketan; Saharudin, Mohd Shahneel

Authors

Guoyu Fu

Dehong Huo

Islam Shyha

Ketan Pancholi

Mohd Shahneel Saharudin



Abstract

Efficient machining of the polyester nanocomposite components requires a better understanding of machinability characteristics of such material, which has become an urgent requirement for modern industrial production. In this research, the micro-milling of polyester/halloysite nano-clay (0.1, 0.3, 0.7, 1.0 wt%) nanocomposites were carried out and the outcomes in terms of tool wear, cutting force, the size effect, surface morphology, and surface roughness were compared with those for plain polyester. In order to accomplish the machining of the material in ductile mode, the required feed per tooth was found to be below 0.3 µm. The degree of surface breakage was also found to decrease in ductile mode. A maximum flank wear VB of 0.012 mm after removing 196 mm3 of workpiece material was measured.

Journal Article Type Article
Publication Date Jul 31, 2019
Journal Nanomaterials
Electronic ISSN 2079-4991
Publisher MDPI
Peer Reviewed Peer Reviewed
Volume 9
Issue 7
Article Number 917
Institution Citation FU, G., HUO, D., SHYHA, I., PANCHOLI, K. and SAHARUDIN, M.S. 2019. Experimental investigation on micro milling of polyester/halloysite nano-clay nanocomposites. Nanomaterials [online], 9(7), article number 917. Available from: https://doi.org/10.3390/nano9070917
DOI https://doi.org/10.3390/nano9070917
Keywords Polymeric nanocomposites; Polyester; Halloysite nano clay; Size effect; Micro-milling

Files







Downloadable Citations