Numerical prediction of the effect of thermal plume of a standing human on the airborne aerosol flow in a room: assessment of the social distancing rule.

Hossain, Mamdud; Chinenye-Kanu, Nkemjika; Faisal, Nadimul H.; Prathuru, Anil; Asim, Taimoor; Banik, Snehashish

doi:10.1007/s41810-022-00165-2

Air plasma sprayed multi-material composite coatings for enhanced light absorption and thermal emission. (2025)
Journal Article
FAISAL, N.H., RAJENDRAN, V., KANIAPAN, S., RAMALINGAM, V., PRATHURU, A., AHMED, R., KATIYAR, N.K., BANSAL, A., WHITTAKER, T., ISHERWOOD, P., WHITTOW, W., EGIZA, M. and GOEL, S. 2025. Air plasma sprayed multi-material composite coatings for enhanced light absorption and thermal emission. Surface and coatings technology [online], 498, article number 131854. Available from: https://doi.org/10.1016/j.surfcoat.2025.131854

This study pioneers a transformative approach to solar thermal technology by leveraging air plasma-sprayed (APS) multi-material composite coatings. It is to achieve unprecedented light absorption and thermal emission, redefining the design paradigm f... Read More about Air plasma sprayed multi-material composite coatings for enhanced light absorption and thermal emission..

Design of a hybrid artificial intelligence system for real-time quantification of impurities in gas streams: application in CO2 capture and storage. (2025)
Journal Article
AMINAHO, E.N., AMINAHO, N.S., HOSSAIN, M., FAISAL, N.H. and AMINAHO, K.A. 2025. Design of a hybrid artificial intelligence system for real-time quantification of impurities in gas streams: application in CO2 capture and storage. Gas science and engineering [online], 134, article number 205546. Available from: https://doi.org/10.1016/j.jgsce.2025.205546

The concentration of gases in gas streams can be monitored using sensors. However, gas sensors can lose their response accuracy due to mechanical wear or damage, and environmental factors such as exposure to unusual temperature and pressure condition... Read More about Design of a hybrid artificial intelligence system for real-time quantification of impurities in gas streams: application in CO2 capture and storage..

Performance enhancement of a modified solar still with inverted pyramid aluminum basin geometry: experimental optimization, thermal and economic assessment. (2024)
Journal Article
DIAB, M.R., ROZZA, M., ALHOSARY, M., NASSAR, S., FAISAL, N., ELSHEIKH, A.H. and EGIZA, M. 2025. Performance enhancement of a modified solar still with inverted pyramid aluminum basin geometry: experimental optimization, thermal and economic assessment. Process safety and environmental protection [online], 193, pages 1173-1187. Available from: https://doi.org/10.1016/j.psep.2024.11.104

Desalination is a promising solution to address the global challenges of water scarcity and energy demand, aided by industrialization and population growth. This study explores the potential to enhance solar still performance by redesigning the basin... Read More about Performance enhancement of a modified solar still with inverted pyramid aluminum basin geometry: experimental optimization, thermal and economic assessment..

Analytical model for laser cutting in porous media. (2024)
Journal Article
MOSTAFA, A., HOSSAIN, M. and FAISAL, N. 2025. Analytical model for laser cutting in porous media. International journal of thermal sciences [online], 208, article number 109513. Available from: https://doi.org/10.1016/j.ijthermalsci.2024.109513

Laser cutting in porous media presents both challenges and opportunities for various applications. Laser cutting requires a deep understanding of heat transfer, materials and laser physics, and can involve nonlinear and transient effects. There is a... Read More about Analytical model for laser cutting in porous media..

Natural fibers for enhanced efficiency and sustainability in solar desalination: a review. (2024)
Journal Article
EGIZA, M., DIAB, M.R., FAISAL, N. and ELSHEIKH, A.H. 2024. Natural fibers for enhanced efficiency and sustainability in solar desalination: a review. Solar energy [online], 282, article number 112963. Available from: https://doi.org/10.1016/j.solener.2024.112963

Global water scarcity, accelerated by inefficient wastewater treatment and the high cost of conventional desalination technologies such as reverse osmosis, necessitates sustainable solutions. Solar stills, harnessing solar energy, offer a promising l... Read More about Natural fibers for enhanced efficiency and sustainability in solar desalination: a review..

Machine learning approach to investigate high temperature corrosion of critical infrastructure materials. (2024)
Journal Article
MUTHUKRISHNAN, R., BALOGUN, Y., RAJENDRAN, V., PRATHURU, A., HOSSAIN, M. and FAISAL, N.H. 2024. Machine learning approach to investigate high temperature corrosion of critical infrastructure materials. High temperature corrosion of materials [online], 101(Suppl 1), pages 309-331. Available from: https://doi.org/10.1007/s11085-024-10312-4

Degradation of coatings and structural materials due to high temperature corrosion in the presence of molten salt environment is a major concern for critical infrastructure applications to meet its commercial viability. The choice of high value coati... Read More about Machine learning approach to investigate high temperature corrosion of critical infrastructure materials..

Applications of artificial intelligence in geothermal resource exploration: a review. (2024)
Journal Article
ALGAIAR, M., HOSSAIN, M., PETROVSKI, A., LASHIN, A. and FAISAL, N. 2024. Applications of artificial intelligence in geothermal resource exploration: a review. Deep underground science and engineering [online], 3(3): geothermal energy, pages 269-285. Available from: https://doi.org/10.1002/dug2.12122

Artificial intelligence (AI) has become increasingly important in geothermal exploration, significantly improving the efficiency of resource identification. This review examines current AI applications, focusing on the algorithms used, the challenges... Read More about Applications of artificial intelligence in geothermal resource exploration: a review..

Optimizing DMF utilization for improved MXene dispersions in epoxy nanocomposites. (2024)
Journal Article
JANJUA, A.A., YOUNAS, M., ILYAS, R.A., SHYHA, I., FAISAL, N.H., INAM, F. and SAHARUDIN, M.S. 2024. Optimizing DMF utilization for improved MXene dispersions in epoxy nanocomposites. Journal of composites science [online], 8(9), article 340. Available from: https://doi.org/10.3390/jcs8090340

Dimethylformamide (DMF), a polar solvent, is commonly used for preparing graphene/epoxy nanocomposites. While previous research has commonly predominantly highlighted the improvement in physio-mechanical properties of these nanocomposites, the effect... Read More about Optimizing DMF utilization for improved MXene dispersions in epoxy nanocomposites..

Acoustic emission wave propagation in pipeline sections and analysis of the effect of coating and sensor location. (2024)
Journal Article
RAJENDRAN, V., PRATHURU, A., FERNANDEZ, C. and FAISAL, N. [2024]. Acoustic emission wave propagation in pipeline sections and analysis of the effect of coating and sensor location. Nondestructive testing and evaluation [online], Latest Articles. Available from: https://doi.org/10.1080/10589759.2024.2390996

This paper presents an experimental investigation in which acoustic emission (AE) wave was generated through a pencil lead break (PLB) as a point source on two pipeline sections made of mild steel and titanium. The pipelines (bare, epoxy phenolic coa... Read More about Acoustic emission wave propagation in pipeline sections and analysis of the effect of coating and sensor location..

Recent developments in mechanical ultraprecision machining for nano/micro device manufacturing. (2024)
Journal Article
OLANIYAN, T., FAISAL, N. and NJUGUNA, J. 2024. Recent developments in mechanical ultraprecision machining for nano/micro device manufacturing. Micromachines [online], 15(8), article number 1030. Available from: https://doi.org/10.3390/mi15081030

The production of many components used in MEMS or NEMS devices, especially those with com-plex shapes, requires machining as the best option among manufacturing techniques. Ultraprecision machining is normally employed to achieve the required shapes,... Read More about Recent developments in mechanical ultraprecision machining for nano/micro device manufacturing..

Wear-resistant and adherent nanodiamond composite thin film for durable and sustainable silicon carbide mechanical seals. (2024)
Journal Article
EGIZA, M., DIAB, M.R., ZIA, A.W., MURASAWA, K., FAISAL, N. and YOSHITAKE, T. 2024. Wear-resistant and adherent nanodiamond composite thin film for durable and sustainable silicon carbide mechanical seals. Wear [online], 550-551, article number 205394. Available from: https://doi.org/10.1016/j.wear.2024.205394

In response to environmental concerns, there is a growing demand for durable and sustainable mechanical seals, particularly in high-risk industries like chemical, petroleum, and nuclear sectors. This work proposes augmenting the durability and sustai... Read More about Wear-resistant and adherent nanodiamond composite thin film for durable and sustainable silicon carbide mechanical seals..

Formation integrity evaluation for geosequestration of CO2 in depleted petroleum reservoirs under cyclic stress conditions. (2024)
Journal Article
AMINAHO, E.N., HOSSAIN, M., FAISAL, N.H. and SANAEE, R. 2024. Formation integrity evaluation for geosequestration of CO2 in depleted petroleum reservoirs under cyclic stress conditions. Geoenergy science and engineering [online], 238, article 212892. Available from: https://doi.org/10.1016/j.geoen.2024.212892

The geological storage of carbon dioxide (CO2), also referred to as CO2 geosequestration, represents one of the most promising options for reducing greenhouse gases in the atmosphere. However, most of the time, CO2 is captured with small amounts of o... Read More about Formation integrity evaluation for geosequestration of CO2 in depleted petroleum reservoirs under cyclic stress conditions..

Machine learning model of acoustic signatures: towards digitalised thermal spray manufacturing. (2023)
Journal Article
VISWANATHAN, V., MCCLOSKEY, A., MATHUR, R., NGUYEN, D.T., FAISAL, N.H., PRATHURU, A., LLAVORI, I., MURPHY, A., TIWARI, A., MATTHEWS, A., AGRAWAL, A. and GOEL, S. 2024. Machine learning model of acoustic signatures: towards digitalised thermal spray manufacturing. Mechanical systems and signal processing [online], 208, article number 111030. Available from: https://doi.org/10.1016/j.ymssp.2023.111030

Thermal spraying, an important industrial surface manufacturing process in sectors such as aerospace, energy and biomedical, remains a skill intensive process often involving multiple trial runs impacting the yield. The core research challenge in dig... Read More about Machine learning model of acoustic signatures: towards digitalised thermal spray manufacturing..

Valorisation of whisky distillery waste as a sustainable source of antioxidant and antibacterial properties with neuroprotective potential. (2023)
Journal Article
BLAIKIE, L., WELGAMAGE DON, A., FRANZEN, X., FERNANDEZ, C., FAISAL, N. and KONG THOO LIN, P. 2024. Valorisation of whisky distillery waste as a sustainable source of antioxidant and antibacterial properties with neuroprotective potential. Waste and biomass valorization [online], 15(4), pages 2333-2343. Available from: https://doi.org/10.1007/s12649-023-02292-4

Waste by-products such as pot ale are abundantly produced during the whisky distillation process and are conventionally used as livestock feed, however a significant proportion continues to require land and sea disposal. Here, the novel potential of... Read More about Valorisation of whisky distillery waste as a sustainable source of antioxidant and antibacterial properties with neuroprotective potential..

Acoustic emission sensor-assisted process monitoring of air plasma-sprayed titanium deposition. (2023)
Journal Article
VISWANATHAN, V., PRATHURU, A., FAISAL, N.H. and GOEL, S. 2023. Acoustic emission sensor-assisted process monitoring of air plasma-sprayed titanium deposition. Journal of thermal spray technology [online], 32(8), pages 2763-2777. Available from: https://doi.org/10.1007/s11666-023-01663-6

Acoustic emission is a sensing technique that offers the potential benefit for its use as an in situ monitoring tool for a wide range of manufacturing processes. This work attempts to highlight the robustness of using acoustic emission (AE) data for... Read More about Acoustic emission sensor-assisted process monitoring of air plasma-sprayed titanium deposition..

A comprehensive review of pre- and post-treatment approaches to achieve sustainable desalination for different water streams. (2023)
Journal Article
POIRIER, K., LOTFI, M., GARG, K., PATCHIGOLLA, K., ANTHONY, E.J., FAISAL, N.H., MULGUNDMATH, V., SAHITH, J.K., JADHAWAR, P., KOH, L., MOROSUK, T. and AL MHANNA, N. 2023. A comprehensive review of pre- and post-treatment approaches to achieve sustainable desalination for different water streams. Desalination [online], 566, article 116944. Available from: https://doi.org/10.1016/j.desal.2023.116944

Desalination is an energy intensive process requiring adequate pre- and post- treatment. The novelty of this paper is that it jointly reviews the technologies for pre-treatment, desalination and post-treatment and bridges the gap between them while c... Read More about A comprehensive review of pre- and post-treatment approaches to achieve sustainable desalination for different water streams..

Advances in structural analysis and process monitoring of thermoplastic composite pipes. (2023)
Journal Article
OKOLIE, O., LATTO, J., FAISAL, N., JAMIESON, H., MUKHERJI, A. and NJUGUNA, J. 2023. Advances in structural analysis and process monitoring of thermoplastic composite pipes. Heliyon [online], 9(7), e17918. Available from: https://doi.org/10.1016/j.heliyon.2023.e17918

Thermoplastic composite pipes (TCP) in comparison to other pipes have proven beneficial features due to its flexibility which includes being fit for purpose, lightweight and no corrosion. However, during the manufacturing of TCP which involves the co... Read More about Advances in structural analysis and process monitoring of thermoplastic composite pipes..

Influence of feedstock and thermal spray process on the phase composition of alumina coatings and their sliding wear. (2023)
Journal Article
ALI, O., AHMED, R., TOMA, F.-L., BERGER, L.-M., MATTHEY, B., FAISAL, N. and AHMED, K. 2023. Influence of feedstock and thermal spray process on the phase composition of alumina coatings and their sliding wear. Journal of thermal spray technology [online], 32(7), pages 2028-2053. Available from: https://doi.org/10.1007/s11666-023-01597-z

Suspension thermal spraying is an emerging coating technology that enables the deposition of dense-structured ceramic coatings. As wear resistance is a main application field of alumina (Al2O3) coatings, this study aimed to evaluate the dry reciproca... Read More about Influence of feedstock and thermal spray process on the phase composition of alumina coatings and their sliding wear..

Manufacturing defects in thermoplastic composite pipes and their effect on the in-situ performance of thermoplastic composite pipes in oil and gas applications. (2022)
Journal Article
OKOLIE, O., LATTO, J., FAISAL, N., JAMIESON, H., MUKHERJI, A. and NJUGUNA, J. 2023. Manufacturing defects in thermoplastic composite pipes and their effect on the in-situ performance of thermoplastic composite pipes in oil and gas applications. Applied composite materials [online], 30(1), pages 231-306. Available from: https://doi.org/10.1007/s10443-022-10066-9

Thermoplastic composite pipes (TCP), which are a form of fibre reinforced thermoplastic pipes, have proven benefits such as being lightweight and non-corrosive. However, during manufacturing, certain defects are induced because of certain parameters,... Read More about Manufacturing defects in thermoplastic composite pipes and their effect on the in-situ performance of thermoplastic composite pipes in oil and gas applications..

Numerical prediction of the effect of thermal plume of a standing human on the airborne aerosol flow in a room: assessment of the social distancing rule. (2022)
Journal Article
HOSSAIN, M., CHINENYE-KANU, N., FAISAL, N.H., PRATHURU, A., ASIM, T. and BANIK, S. 2023. Numerical prediction of the effect of thermal plume of a standing human on the airborne aerosol flow in a room: assessment of the social distancing rule. Aerosol science and engineering [online], 7(1), pages 96-106. Available from: https://doi.org/https://doi.org/10.1007/s41810-022-00165-2

The purpose of the study is to investigate the dispersion of droplet nuclei/aerosol which are produced during coughing and continuous talking to quantify the risk of infection due to airborne disease transmission. A three-dimensional modelling of aer... Read More about Numerical prediction of the effect of thermal plume of a standing human on the airborne aerosol flow in a room: assessment of the social distancing rule..

All Outputs (63)