All Outputs (126)

Neutron scattering study of strain behaviour of porous rocks subjected to heating and unconfined uniaxial compression. (2018)
Presentation / Conference Contribution
FAISAL, N.H., SANAEE, R., SINGH, R.M., MURRAY, J., MCLAUGHLIN, A., HEALY, D. and LEE, T.-L. 2018. Neutron scattering study of strain behaviour of porous rocks subjected to heating and unconfined uniaxial compression. Journal of physics: conference series [online], 1106: proceedings of the 2018 Modern practice in stress and vibration analysis (MPSVA 2018), 2-4 July 2018, Cambridge, UK, article ID 012011. Available from: https://doi.org/10.1088/1742-6596/1106/1/012011

Neutron scattering (at ENGIN-X) was used to examine strain distributions in two hydrocarbon reservoir rock types (i.e. sandstone and chalk) under uniaxial stress (up to 35 MPa) at temperature as high as 70 °C to utilise the advantages of neutron scat... Read More about Neutron scattering study of strain behaviour of porous rocks subjected to heating and unconfined uniaxial compression..

Comparative study of corrosion performance of HVOF-sprayed coatings produced using conventional and suspension WC-Co feedstock. (2018)
Journal Article
AHMED.R., VOURLIAS, G., ALGOBURI, A., VOGIATZIS, C., CHALIAMPALIAS, D., SKOLIANOS, S., BERGER, L.-M., PAUL, S., FAISAL, N.H., TOMA, F.-L., AL-ANAZI, N.M and GOOSEN, M.F.A. 2018. Comparative study of corrosion performance of HVOF-sprayed coatings produced using conventional and suspension WC-Co feedstock. Journal of thermal spray technology [online], 27(8), pages 1579-1593. Available from: https://doi.org/10.1007/s11666-018-0775-2

Corrosion properties of nanostructured coatings deposited by suspension high-velocity oxy-fuel (S-HVOF) via an aqueous suspension of milled WC-Co powder were compared with conventional HVOF-sprayed coatings. Microstructural evaluations of these coati... Read More about Comparative study of corrosion performance of HVOF-sprayed coatings produced using conventional and suspension WC-Co feedstock..

Diametral compression test method to analyse relative surface stresses in thermally sprayed coated and uncoated circular disc specimens. (2018)
Journal Article
FAISAL, N.H., MANN, L., DUNCAN, C., DUNBAR, E., CLAYTON, M., FROST, M., MCCONNACHIE, J., FARDAN, A. and AHMED, R. 2019. Diametral compression test method to analyse relative surface stresses in thermally sprayed coated and uncoated circular disc specimens. Surface and coatings technology [online], 357, pages 497-514. Available from: https://doi.org/10.1016/j.surfcoat.2018.10.053

In firsts of its investigation, a diametral compression destructive testing method (also known as Brazilian test) was performed on thermally sprayed coated and uncoated circular disc specimens to compare relative surface stresses. The coating investi... Read More about Diametral compression test method to analyse relative surface stresses in thermally sprayed coated and uncoated circular disc specimens..

Neutron diffraction strain analysis of ceramic coatings from suspension thermal spray. [Dataset] (2018)
Data
HUSSAIN, T., TEJERO MARTIN, D., LEE, T.L., DERELIZADE, K., KELLEHER, J., OWOSENI, T., FAISAL, N. and PULSFORD, J. 2018. Neutron diffraction strain analysis of ceramic coatings from suspension thermal spray. [Dataset]. Hosted on STFC ISIS neutron and muon source data journal [online]. Available from: https://doi.org/10.5286/ISIS.E.98023160

Liquid feedstock containing sub-micron to nano-sized particles is used in suspension thermal spray to produce nanostructured ceramic coatings with improved density, strength and durability over conventional powder based thermal sprayed coatings. It h... Read More about Neutron diffraction strain analysis of ceramic coatings from suspension thermal spray. [Dataset].

Modal acoustic emission analysis of mode-I and mode-II fracture of adhesively-bonded joints. (2018)
Presentation / Conference Contribution
CRAWFORD, A.R., DROUBI, M.G. and FAISAL, N.H. 2018. Modal acoustic emission analysis of mode-I and mode-II fracture of adhesively-bonded joints. Presented at the 33rd European Working Group on Acoustic Emission (EWGAE) European acoustic emission testing conference (EWGAE 2018), 12-14 September 2018, Senlis, France [online], pages 218-228. Available from: http://www.ewgae2018.com/wp-content/uploads/2018/09/EWGAE-Conference-Proceedings_2018-1.pdf

Acoustic emission (AE) testing has previously been demonstrated to be well suited to detecting failure in adhesively-bonded joints. In this work, the relationship between the fracture-mode of adhesively-bonded specimens and the acoustic wave-modes ex... Read More about Modal acoustic emission analysis of mode-I and mode-II fracture of adhesively-bonded joints..

Future of nanoindentation in archaeometry. (2018)
Journal Article
FAISAL, N.H., AHMED, R., GOEL, S. and CROSS, G. 2018. Future of nanoindentation in archaeometry. Journal of materials research [online], 33(17), pages 2515-2532. Available from: https://doi.org/10.1557/jmr.2018.280

This review aims to consolidate scarce literature on the use of modern nanomechanical testing technique like instrumented nanoindentation in the field of archaeometry materials research. The review showcase on how can the nanoindentation tests provid... Read More about Future of nanoindentation in archaeometry..

Neutron diffraction residual stress measurements in suspension HVOF sprayed Al2O3 and YSZ coatings. (2018)
Presentation / Conference Contribution
OWOSENI, T., BAI, M., HUSSAIN, T., FAISAL, N.H., LEE, T.L. and KELLEHER, J. 2019. Neutron diffraction residual stress measurements in suspension HVOF sprayed Al2O3 and YSZ coatings. In Azarmi, F., Balani, K., Eden, T., Hussain, T., Li, H., Shinoda, K. and Toma, F.-L. (eds.) Proceedings of the 2018 International thermal spray conference (ITSC 2018), 7-10 May 2018, Orlando, USA. Ohio: ASM International [online], pages 490-495. Available from: http://www.proceedings.com/47648.html

Thermally sprayed coatings have residual stresses due to the processing techniques where the particles go through thermal softening/melting, high velocity impact and rapid solidification. The nature and magnitude of residual stresses in these coating... Read More about Neutron diffraction residual stress measurements in suspension HVOF sprayed Al2O3 and YSZ coatings..

Analysis of acoustic emission propagation in metal-to-metal adhesively-bonded joints. (2018)
Journal Article
CRAWFORD, A., DROUBI, M.G. and FAISAL, N.H. 2018. Analysis of acoustic emission propagation in metal-to-metal adhesively-bonded joints. Journal of nondestructive evaluation [online], 37(2), article number 33. Available from: https://doi.org/10.1007/s10921-018-0488-y

Acoustic emission (AE) monitoring shows promise as one of the most effective methods for condition monitoring of adhesively-bonded joints. Previous research has demonstrated its ability to detect, locate and classify adhesive joint failure, though in... Read More about Analysis of acoustic emission propagation in metal-to-metal adhesively-bonded joints..

Neutron scattering of porous rocks subjected to uniaxial compression in cryogenic conditions for offshore drilling operations in Arctic. [Dataset] (2018)
Data
FAISAL, N., SANAEE, R., LEE, T.L., MCLAUGHLIN, A. and SINGH, R.M. 2018. Neutron scattering of porous rocks subjected to uniaxial compression in cryogenic conditions for offshore drilling operations in Arctic. [Dataset]. Hosted on STFC ISIS neutron and muon source data journal [online]. Available from: https://doi.org/10.5286/ISIS.E.92924528

In August 2015, the oil and gas company (Royal Dutch Shell plc) were granted the final permit it needs to begin drilling below the ocean floor for oil in the Arctic. They have been allowed to drill just the top sections of two wells, off the coast of... Read More about Neutron scattering of porous rocks subjected to uniaxial compression in cryogenic conditions for offshore drilling operations in Arctic. [Dataset].

Residual strain measurement in suspension based thermal sprayed nanostructured alumina coatings: part two. [Dataset] (2018)
Data
HUSSAIN, T., MURRAY, J., LEE, T.L., OWOSENI, T., BAI, M., FAISAL, N., MARTIN, D.T., DERELIZADE, K. and KELLEHER, J. 2018. Residual strain measurement in suspension based thermal sprayed nanostructured alumina coatings: part two. [Dataset]. Hosted on STFC ISIS neutron and muon source [online]. Available from: https://doi.org/10.5286/ISIS.E.90880498

Suspension and solution precursor (SSP) spraying is an emerging thermal spraying technology which utilises liquid feedstock containing sub-micrometre and nanoparticles. Alumina (Al2O3) is a widely used engineering ceramic and it has excellent dielect... Read More about Residual strain measurement in suspension based thermal sprayed nanostructured alumina coatings: part two. [Dataset].

Molten metal anode solid oxide fuel cell for transportation-related auxiliary power units. (2017)
Patent
FAISAL, N.H., AHMED, R., GOOSEN, M.F., KATIKANENI, S.P. and SOUENTIE, S. 2020. Molten metal anode solid oxide fuel cell for transportation-related auxiliary power units. US patent 10,661,736, granted 26.05.2020. US publication number US20170334379, first published 23.11.2017. Available from: http://patft.uspto.gov/netacgi/nph-Parser?patentnumber=10661736

A vehicular power system, a vehicle and a method of providing auxiliary power to a vehicle using an auxiliary power unit that uses a molten metal anode solid oxide fuel cell rather than an internal combustion engine. The auxiliary power unit includes... Read More about Molten metal anode solid oxide fuel cell for transportation-related auxiliary power units..

Corrosion properties of anodized titanium. (2017)
Journal Article
HLINKA, J., LASEK, S. and FAISAL, N. 2017. Corrosion properties of anodized titanium. Acta metallurgica Slovaca [online], 23(3), pages 270-275. Available from: https://doi.org/10.12776/ams.v23i3.982

In this paper corrosion properties and microstructure features of amorphous self-organised TiO2 nanotubes electrochemically deposited on titanium are discussed. There was titanium of second grade used as a substrate for these experiments. There was a... Read More about Corrosion properties of anodized titanium..

Neutron scattering study of stress-strain behaviour of porous geological materials. [Dataset] (2017)
Data
FAISAL, N., KABRA, S., SANAEE, R. and SINGH, R.M. 2017. Neutron scattering study of stress-strain behaviour of porous geological materials. [Dataset]. Hosted on STFC ISIS neutron and muon source [online]. Available from: https://doi.org/10.5286/ISIS.E.87813334

Quantifying the relationship between stress-strain and fracture is important to the perfection of fracture capability if it is to be used as a tool for guiding failure operations in geological materials drilling. The development of fracture predictio... Read More about Neutron scattering study of stress-strain behaviour of porous geological materials. [Dataset].

Mixed-mode fracture characteristics of metal-to-metal adhesively bonded joints: experimental and simulation methods. (2017)
Presentation / Conference Contribution
DROUBI, M.G., MCAFEE, J., HORNE, R.C., WALKER, S., KLAASSEN, C., CRAWFORD, A., PRATHURU, A.K. and FAISAL, N.H. 2017. Mixed-mode fracture characteristics of metal-to-metal adhesively bonded joints: experimental and simulation methods. Procedia structural integrity [online], 5: proceedings of the 2nd International conference on structural integrity (ICSI 2017), 4-7 September 2017, Funchal, Portugal, pages 40-47. Available from: https://doi.org/10.1016/j.prostr.2017.07.059

Fracture behavior of adhesively bonded joints subjected to mixed-mode (i.e. mode I+II) loading conditions is of importance in many industrial applications. This research therefore aims to characterise the failure behaviour of metal-to-metal (i.e. bot... Read More about Mixed-mode fracture characteristics of metal-to-metal adhesively bonded joints: experimental and simulation methods..

Application of acoustic emission to predict corrosion. (2017)
Presentation / Conference Contribution
DROUBI, M.G. and FAISAL, N.H. 2017. Application of acoustic emission to predict corrosion. In Proceedings of the 14th International conference of the Slovenian Society for Non-Destructive Testing: application of contemporary non-destructive testing in engineering (NDT-Slovenia 2017), 4-6 September 2017, Bernardin, Slovenia. Mayen: NDT.net [online], pages 271-278. Available from: https://www.ndt.net/article/ndt-slovenia2017/papers/271.pdf

Non-destructive testing (NDT) techniques used for petroleum pipelines and offshore wind-turbines can only detect corrosion after it has occurred. Therefore, intrusive inspections are required regularly, potentially causing disruption to operation and... Read More about Application of acoustic emission to predict corrosion..

Assessment of nanoparticles release into the environment during drilling of carbon nanotubes/epoxy and carbon nanofibres/epoxy nanocomposites. (2017)
Journal Article
STAROST, K., FRIJNS, E., VAN LAER, J., FAISAL, N., EGIZABAL, A., ELIZEXTEA, C., BLAZQUEZ, M., NELISSEN, I. and NJUGUNA, J. 2017. Assessment of nanoparticles release into the environment during drilling of carbon nanotubes/epoxy and carbon nanofibres/epoxy nanocomposites. Journal of hazardous materials [online], 340, pages 57-66. Available from: https://doi.org/10.1016/j.jhazmat.2017.06.057

The risk assessment, exposure and understanding of the release of embedded carbon nanotubes (CNTs) and carbon nanofibers (CNFs) from commercial high performance composites during machining processes is yet to be fully evaluated and quantified. In thi... Read More about Assessment of nanoparticles release into the environment during drilling of carbon nanotubes/epoxy and carbon nanofibres/epoxy nanocomposites..

Comparison of wear performance of thermal sprayed cermet (WC-Co) coatings from suspension and feedstock powders. (2017)
Presentation / Conference Contribution
ALI, O., AHMED, R., ALAWADHI, H., SHAMEER, M., FAISAL, N., AL-ANAZI, N. and GOOSEN, M. 2017. Comparison of wear performance of thermal sprayed cermet (WC-Co) coatings from suspension and feedstock powders. In Proceedings of the 2017 International thermal spray conference and exposition (ITSC 2017), 7-9 June 2017, Düsseldorf, Germany. Düsseldorf: DVS Media, pages 681-686.

WC-Co coatings were deposited using conventional High Velocity Oxy-Fuel Jet-Kote (HVOF-JK) and Suspension HVOF (S-HVOF) methods. Microstructural and mechanical properties along with the wear resistance of coatings were investigated. Reciprocating sli... Read More about Comparison of wear performance of thermal sprayed cermet (WC-Co) coatings from suspension and feedstock powders..

Fuel cells as an energy source for desalination applications. (2017)
Book Chapter
FAISAL, N.H., AHMED, R., ISLAM, S.K., HOSSAIN, M., GOOSEN, M.F.A. and KATIKANENI, S.P. 2017. Fuel cells as an energy source for desalination applications. In Mahmoudi, H., Ghaffour, N., Goosen, M.F.A. and Bundschuh, J. (eds.) Renewable energy technologies for water desalination. Boca Raton: CRC Press [online], chapter 7, pages 131-145. Available from: https://doi.org/10.1201/9781315643915-7

Nowadays, there is a renewed interest in fuel cell technology from industry and academia, electrochemistry and catalysis scientists. This interest is due to environmental legislations for CO2 and other greenhouse gases emissions (United Nations Envir... Read More about Fuel cells as an energy source for desalination applications..

Neutron diffraction residual strain measurements of molybdenum carbide-based solid oxide fuel cell anode layers with metal oxides on Hastelloy X. (2017)
Journal Article
FAISAL, N.H., AHMED, R., PRATHURU, A.K., KATIKANENI, S.P., GOOSEN, M.F.A. and ZHANG, S-Y. 2018. Neutron diffraction residual strain measurements of molybdenum carbide-based solid oxide fuel cell anode layers with metal oxides on Hastelloy X. Experimental mechanics [online], 58(4), pages 585-603. Available from: https://doi.org/10.1007/s11340-017-0298-7

Thermal spray deposition processes impart residual stress in layered Solid Oxide Fuel Cells (SOFC) materials and hence influence the durability and efficiency of the cell. The current study which is the first of its kind, reports results on using a n... Read More about Neutron diffraction residual strain measurements of molybdenum carbide-based solid oxide fuel cell anode layers with metal oxides on Hastelloy X..

The effect of nanosilica (SiO2) and nanoalumina (Al2O3) reinforced polyester nanocomposites on aerosol nanoparticle emissions into the environment during automated drilling. (2017)
Journal Article
STAROST, K., FRIJNS, E., VAN LAER, J., FAISAL, N., EGIZABAL, A., ELIZEXTEA, C., NEILSSEN, I., BALZQUEZ, M. and NJUGUNA, J. 2017. The effect of nanosilica (SiO2) and nanoalumina (Al2O3) reinforced polyester nanocomposites on aerosol nanoparticle emissions into the environment during automated drilling. Aerosol science and technology [online], 51(9), pages 1035-1046. Available from: https://doi.org/10.1080/02786826.2017.1330535

The aim of this study is to investigate the effect nanosilica and nanoalumina has on nanoparticle release from industrial nanocomposites due to drilling for hazard reduction whilst simultaneously obtaining the necessary mechanical performance. This s... Read More about The effect of nanosilica (SiO2) and nanoalumina (Al2O3) reinforced polyester nanocomposites on aerosol nanoparticle emissions into the environment during automated drilling..