All Outputs (24)

Comparative analysis of mechanical response in epoxy nanocomposites reinforced with MXene and other carbon-based nano-fillers: an experimental and numerical study. (2024)
Journal Article
SAHARUDIN, M.S., HASBI, S., AHMAD, E.Z., SAGAR, S., DAOUSH, W.M. and INAM, F. 2024. Comparative analysis of mechanical response in epoxy nanocomposites reinforced with MXene and other carbon-based nano-fillers: an experimental and numerical study. Journal of advanced research in micro and nano engineering [online], 26(1), pages 54-65. Available from: https://doi.org/10.37934/armne.26.1.5465

This research introduces a finite element model tailored explicitly to assess the mechanical characteristics inherent in MXene/polymer nano-composite. The primary focus revolves around elucidating the performance attributes through numerical simulati... Read More about Comparative analysis of mechanical response in epoxy nanocomposites reinforced with MXene and other carbon-based nano-fillers: an experimental and numerical study..

Advanced functional materials based on nanocellulose/Mxene: a review. (2024)
Journal Article
AL-FAKIH, G.O.A., ILYAS, R.A., ATIQAH, A., ATIKAH, M.S.N., SAIDUR, R., DUFRESNE, A., SAHARUDIN, M.S., ABRAL, H. and SAPUAN, S.M. 2024. Advanced functional materials based on nanocellulose/Mxene: a review. International journal of biological macromolecules [online], 278(4), article number 135207. Available from: https://doi.org/10.1016/j.ijbiomac.2024.135207

The escalating need for a sustainable future has driven the advancement of renewable functional materials. Nanocellulose, derived from the abundant natural biopolymer cellulose, demonstrates noteworthy characteristics, including high surface area, cr... Read More about Advanced functional materials based on nanocellulose/Mxene: a review..

Optimizing DMF utilization for improved MXene dispersions in epoxy nanocomposites. (2024)
Journal Article
JANJUA, A.A., YOUNAS, M., ILYAS, R.A., SHYHA, I., FAISAL, N.H., INAM, F. and SAHARUDIN, M.S. 2024. Optimizing DMF utilization for improved MXene dispersions in epoxy nanocomposites. Journal of composites science [online], 8(9), article 340. Available from: https://doi.org/10.3390/jcs8090340

Dimethylformamide (DMF), a polar solvent, is commonly used for preparing graphene/epoxy nanocomposites. While previous research has commonly predominantly highlighted the improvement in physio-mechanical properties of these nanocomposites, the effect... Read More about Optimizing DMF utilization for improved MXene dispersions in epoxy nanocomposites..

Assessment of machinability of Ti6Al4V alloy under dry conditions. (2024)
Presentation / Conference Contribution
YOUNAS, M., SAMBO, A.M., ASIM, T. and SAHARUDIN, S. 2024. Assessment of machinability of Ti6Al4V alloy under dry conditions. MATEC web of conferences [online], 401: proceedings of the 21st International conference on manufacturing research (ICMR 2024), 28-30 August 2024, Glasgow, UK, article number 06005. Available from: https://doi.org/10.1051/matecconf/202440106005

Titanium alloys pose significant challenges during machining, necessitates a thorough investigation into the impact of process parameters on machining Ti6Al4V alloy. This study investigates into the machinability of Ti6Al4V alloy under dry machining... Read More about Assessment of machinability of Ti6Al4V alloy under dry conditions..

Enhanced mechanical, thermal, and morphological properties of waste PET plastics reinforced with coated biodegradable kenaf fibers for infrastructure applications. (2024)
Journal Article
OWEN, M.M., WONG, L.S., ACHUKWU, E.O., SAHARUDIN, M.S. and AKIL, H.M. 2024. Enhanced mechanical, thermal, and morphological properties of waste PET plastics reinforced with coated biodegradable kenaf fibers for infrastructure applications. Construction and building materials [online], 442, article number 137659. Available from: https://doi.org/10.1016/j.conbuildmat.2024.137659

The surge in polyethylene terephthalate (PET) plastic bottle production has led to a rise in waste PET plastics. Recycling these waste PET plastics for infrastructural purposes offers a feasible solution to curb environmental pollution and the climat... Read More about Enhanced mechanical, thermal, and morphological properties of waste PET plastics reinforced with coated biodegradable kenaf fibers for infrastructure applications..

Design and fabrication of a wrist splint for burn patient rehabilitation using 3D printing technologies. (2023)
Journal Article
CANN, C. and SAHARUDIN, M.S. 2023. Design and fabrication of a wrist splint for burn patient rehabilitation using 3D printing technologies. Journal of physics: conference series [online], 2643: proceedings of the 8th International conference on applications and design in mechanical engineering 2023 (ICADME 2023), 4-5 September 2023, Kuala Lumpur, Malaysia, article 012003. Available from: https://doi.org/10.1088/1742-6596/2643/1/012003

Severe and common injuries involving burns to the hands and wrists can often lead to permanent loss of motion. The issue is exacerbated by the delicate nature of tendons and muscles in the hands, along with the formation of scar tissue. While rehabil... Read More about Design and fabrication of a wrist splint for burn patient rehabilitation using 3D printing technologies..

Carbon fibers/nickel nanocomposite particles reinforced ethylene vinyl acetate stretchable conductive polymer: fabrication, microstructure, electrical and mechanical properties. (2023)
Journal Article
DAOUSH, W.M., AL-ZUAIR, A.F., SAHARUDIN, M.S. and INAM, F. 2024. Carbon fibers/nickel nanocomposite particles reinforced ethylene vinyl acetate stretchable conductive polymer: fabrication, microstructure, electrical and mechanical properties. Carbon letters [online], 34(5), pages 1301-1316. Available from: https://doi.org/10.1007/s42823-023-00630-z

Carbon fibers of polyacrylonitrile (PAN) type were coated with nickel nanoparticles using a chemical reduction method in alkaline hydrazine bath. The carbon fibers were firstly heated at 400°C and then chemically treated in hydrochloric acid followed... Read More about Carbon fibers/nickel nanocomposite particles reinforced ethylene vinyl acetate stretchable conductive polymer: fabrication, microstructure, electrical and mechanical properties..

Development of coconut oil/capric acid eutectic phase change material with graphene as latent thermal energy storage. (2023)
Journal Article
HASBI, S., LEONG, K.Y., KU AHMAD, K.Z., ABDUL RAHIM, N. and SAHARUDIN, M.S. 2023. Development of coconut oil/capric acid eutectic phase change material with graphene as latent thermal energy storage. International journal of automotive and mechanical engineering [online], 20(1), pages 10247-10257. Available from: https://doi.org/10.15282/ijame.20.1.2023.07.0792

In this study, a eutectic mixture of coconut oil (CO)-capric acid (CA) was synthesised and investigated with the aim of producing newly eutectic phase change materials (PCMs) with improved thermal properties as thermal energy storage (TES). Although... Read More about Development of coconut oil/capric acid eutectic phase change material with graphene as latent thermal energy storage..

Advances in sustainable nanocomposites. (2023)
Journal Article
SAHARUDIN, M.S., ILYAS, R.A., AWANG, N., HASBI, S., SHYHA, I. and INAM, F. 2023. Advances in sustainable nanocomposites. Sustainability [online], 15(6), article number 5125. Available from: https://doi.org/10.3390/su15065125

Advances in Sustainable Nanocomposites is a newly opened Special Issue of Sustainability, which aims to publish original and review papers on the new scientific development of sustainable nanocomposite materials that are accelerated by zero-carbon po... Read More about Advances in sustainable nanocomposites..

Recent advances in MXene composites research, applications and opportunities. (2023)
Presentation / Conference Contribution
SAHARUDIN, M.S., AYUB, A., HASBI, S., MUHAMMAD-SUKKI, F., SHYHA, I. and INAM, F. [2023]. Recent advances in MXene composites research, applications and opportunities. Materials today: proceedings [online], In Press. Proceedings of the 2022 Composite sciences and technology international conference (COMSAT2022), 22-23 August 2022, Johor, Malaysia. Available from: https://doi.org/10.1016/j.matpr.2023.02.435

MXene composites have emerged as a promising class of materials due to their exceptional properties and versatility in various applications. In recent years, researchers have made significant progress in the development and characterization of MXene... Read More about Recent advances in MXene composites research, applications and opportunities..

Effects of titanium oxide and graphene as nano-fillers on the thermal conductivity of biobased phase change materials as latent thermal heat storage. (2022)
Presentation / Conference Contribution
HASBI, S., NORAZMAN, N. and SAHARUDIN, M.S. 2023. Effects of titanium oxide and graphene as nano-fillers on the thermal conductivity of biobased phase change materials as latent thermal heat storage. Materials today: proceedings [online], 75(1): proceedings of the 2022 Innovative manufacturing, mechatronics and material forum (iM3F 2022), pages 181-187. Available from: https://doi.org/10.1016/j.matpr.2022.11.426

Biobased phase change materials (BPCMs) have attracted much attention as they offer proper melting temperature, high heat capacity, non-corrosive, low cost, and are abundantly available. However, the BPCMs have a low thermal conductivity which limits... Read More about Effects of titanium oxide and graphene as nano-fillers on the thermal conductivity of biobased phase change materials as latent thermal heat storage..

Cutting strategy of polymer composite material for aerospace engineering application. (2022)
Presentation / Conference Contribution
SANI, A.S.A., ZAINUDDIN, A.Z. and SAHARUDIN, M.S. 2022. Cutting strategy of polymer composite material for aerospace engineering application. In Sani, A.S.A., Zahid, M.N.O., Yasin, M.R.M., Ismail, S.Z., Zawawi, M.Z.M., Manaf, A.R.A., Saffe, S.N.M., Aziz, R.A. and Turan, F.M. (eds.) Enabling industry 4.0 through advances in manufacturing and materials: selected articles from the proceedings of the 2021 Innovative manufacturing, mechatronics and materials forum (iM3F 2021), 20 September 2021, Pekan, Malaysia. Singapore: Springer [online], pages 543-552. Available from: https://doi.org/10.1007/978-981-19-2890-1_51

Despite the popular use of hybrid fibers in polymer composite in aerospace applications, it comes with a price where it is expensive and has a complex process to produce. A new alternative method of using nanocomposite using natural fiber such as Epo... Read More about Cutting strategy of polymer composite material for aerospace engineering application..

Carbon nanotubes after 30 years of research, development and commercialisation. (2022)
Journal Article
SAHARUDIN, M.S., SAGAR IQBAL, S. and INAM, F. [2022]. Carbon nanotubes after 30 years of research, development and commercialisation. Nanomedicine and nanotechnology journal [online], Rapid Release. Available from: https://www.scientificliterature.org/Nanomedicine/Nanomedicine-22-131.pdf

The commentary discusses the last three decades of research, development and successful commercialisation of Carbon Nanotubes (CNTs) and their related composites. Whilst the number of publications are on the decline and despite of major technical cha... Read More about Carbon nanotubes after 30 years of research, development and commercialisation..

Tensile and corrosion resistance studies of MXenes/nanocomposites: a review. (2022)
Presentation / Conference Contribution
SAHARUDIN, M.S., CHE NASIR, N.A. and HASBI, S. 2022. Tensile and corrosion resistance studies of MXenes/nanocomposites: a review. In Ismail, A., Dahalan, W.M. and Öchsner A. (eds.). Design in maritime engineering: contributions from the 2nd International conference on marine and advanced technologies 2021 (ICMAT 2021), 24 August 2021, [virtual conference]. Advanced structured materials, 167. Cham: Springer [online], pages 189-198. Available from: https://doi.org/10.1007/978-3-030-89988-2_14

MXenes are a relatively new and interesting class of two-dimensional materials with diverse compositions and outstanding characteristics such as dispersibility and metallic conductivity. MXenes appear to be promising fillers for polymer nanocomposite... Read More about Tensile and corrosion resistance studies of MXenes/nanocomposites: a review..

Quality of surface texture and mechanical properties of PLA and PA-based material reinforced with carbon fibers manufactured by FDM and CFF 3D printing technologies. (2021)
Journal Article
SAHARUDIN, M.S., HAJNYS, J., KOZIOR, T., GOGOLEWSKI, D. and ZMARZŁY, P. 2021. Quality of surface texture and mechanical properties of PLA and PA-based material reinforced with carbon fibers manufactured by FDM and CFF 3D printing technologies. Polymers [online], 13(11), article 1671. Available from: https://doi.org/10.3390/polym13111671

The paper presents the results of mechanical tests of models manufactured with two 3D printing technologies, FDM and CFF. Both technologies use PLA or PA-based materials reinforced with carbon fibers. The work includes both uniaxial tensile tests of... Read More about Quality of surface texture and mechanical properties of PLA and PA-based material reinforced with carbon fibers manufactured by FDM and CFF 3D printing technologies..

Tensile properties of epoxy/1 wt% graphene nanocomposites prepared with ethanol. (2021)
Presentation / Conference Contribution
SAHARUDIN, M.S., HASBI, S., OKOLO, C. and INAM, F. 2021. Tensile properties of epoxy/1 wt% graphene nanocomposites prepared with ethanol. IOP conference series: materials science and engineering [online], 1072: proceedings of the 2020 Joint international conference of the 2nd International conference on industrial and system engineering (IConISE) and the 7th Annual conference on industrial and system engineering (ACISE), 22-23 July 2020, Surabaya, Indonesia, article 012009. Available from: https://doi.org/10.1088/1757-899X/1072/1/012009

In this research, solution casting technique was applied to produce four types of nanocomposites. Different ethanol dosages; 0g, 1g, 3g, and 5g were used to disperse graphene in the epoxy matrix. It was observed that 1g dosage of ethanol was the most... Read More about Tensile properties of epoxy/1 wt% graphene nanocomposites prepared with ethanol..

Design of an environmental stress cracking (ESC) tester using fracture mechanics approach. (2021)
Journal Article
MOHAMAD NOR AZLI, M.S., MOHD RADZI, M.F., AHMAD NAZRI, M.N., SAHARUDIN, M.S. and INAM, F. 2021. Design of an environmental stress cracking (ESC) tester using fracture mechanics approach. Journal of mechanical engineering [online], 18(1), pages 123-136. Available from: https://jmeche.uitm.edu.my/wp-content/uploads/2021/01/8-RI-18-1-P20-50.pdf

In this research, an ESC tester machine was built by utilising a fracture mechanics approach. The machine consists of critical components such as an aluminium frame, 3D printed pulley and bracket, DC motor, Arduino microcontroller, and fasteners. The... Read More about Design of an environmental stress cracking (ESC) tester using fracture mechanics approach..

The processing of epoxy/multi-layer graphene nanocomposites: effects of acetone on properties. (2019)
Journal Article
SAHARUDIN, M.S., HASBI, S., OKOLO, C., WEI, J. and JUSOH, A.R. 2019. The processing of epoxy/multi-layer graphene nanocomposites: effects of acetone on properties. Journal of engineering science and technology [online], 14(6), pages 3131-3142. Available from: https://tinyurl.com/57nrhehp

Epoxy/multi-layer graphene nanocomposites prepared with different acetone dosages (0 ml, 25 ml and 50 ml) were successfully produced. This study investigates the effectiveness of short-term dispersion and small dosages of acetone on the properties of... Read More about The processing of epoxy/multi-layer graphene nanocomposites: effects of acetone on properties..

The processing of epoxy/1 wt%-graphene nanocomposites: effects of ethanol on flexural properties. (2019)
Journal Article
SAHARUDIN, M.S., HASBI, S., ZULKIFLI, A. and ZAILANI, N.F. 2019. The processing of epoxy/1 wt%-graphene nanocomposites: effects of ethanol on flexural properties. International journal of innovative technology and exploring engineering [online], 9(1), pages 5440-5444. Available from: https://doi.org/10.35940/ijitee.A8105.119119

Four different types of nanocomposites were successfully produced using solution casting technique. Graphene was dispersed in four different ethanol concentrations; 0g, 1g, 2.5g, and 5g. In general, it can be observed that ethanol is an excellent age... Read More about The processing of epoxy/1 wt%-graphene nanocomposites: effects of ethanol on flexural properties..

Synergistic effects of halloysite and carbon nanotubes (HNTs + CNTs) on the mechanical properties of epoxy nanocomposites. (2019)
Journal Article
SAHARUDIN, M.S., ATIF, R., HASBI, S., NAZRI, M.N.A., SAIDIN, N.U. and ABDULLAH, Y. 2019. Synergistic effects of halloysite and carbon nanotubes (HNTs + CNTs) on the mechanical properties of epoxy nanocomposites. AIMS materials science [online], 6(6), pages 900-910. Available from: https://doi.org/10.3934/matersci.2019.6.900

The synergistic effects of halloysite nanotubes (HNTs) and carbon nanotubes (CNTs) on the mechanical properties of epoxy nanocomposites were investigated. The addition of hybrid nanofillers (0.5 wt% HNTs-0.5 wt% CNTs) has significantly increased the... Read More about Synergistic effects of halloysite and carbon nanotubes (HNTs + CNTs) on the mechanical properties of epoxy nanocomposites..