All Outputs (640)

The processing of epoxy/1 wt%-graphene nanocomposites: effects of ethanol on flexural properties. (2019)
Journal Article
SAHARUDIN, M.S., HASBI, S., ZULKIFLI, A. and ZAILANI, N.F. 2019. The processing of epoxy/1 wt%-graphene nanocomposites: effects of ethanol on flexural properties. International journal of innovative technology and exploring engineering [online], 9(1), pages 5440-5444. Available from: https://doi.org/10.35940/ijitee.A8105.119119

Four different types of nanocomposites were successfully produced using solution casting technique. Graphene was dispersed in four different ethanol concentrations; 0g, 1g, 2.5g, and 5g. In general, it can be observed that ethanol is an excellent age... Read More about The processing of epoxy/1 wt%-graphene nanocomposites: effects of ethanol on flexural properties..

Performance evaluation of unconcentrated photovoltaic-thermoelectric generator hybrid system under tropical climate. (2019)
Journal Article
SHATAR, N.M., RAHMAN, M.A.A., MUHTAZARUDDIN, M.N., SALIM, S.A.Z.S., SINGH, B., MUHAMMAD-SUKKI, F., BANI, N.A., SAUDI, A.S.M. and ARDILA-REY, J.A. 2019. Performance evaluation of unconcentrated photovoltaic-thermoelectric generator hybrid system under tropical climate. Sustainability [online], 11(22), article ID 6192. Available from: https://doi.org/10.3390/su11226192

Indoor farming is among the approaches which can be adapted to improve agricultural sustainability and ensure the food security of countries. However, adopting indoor farming requires a high amount of energy to sustain the system. Incorporating a ren... Read More about Performance evaluation of unconcentrated photovoltaic-thermoelectric generator hybrid system under tropical climate..

Modification of the Vipulanandan rheological model with correlation for temperature and electrolyte effect on drilling muds. (2019)
Journal Article
AFOLABI, R.O. and YUSUF, E.O. 2020. Modification of the Vipulanandan rheological model with correlation for temperature and electrolyte effect on drilling muds. Advanced powder technology [online], 31(1), pages 312-322. Available from: https://doi.org/10.1016/j.apt.2019.10.023

Modelling the flow of drilling muds requires the use of existing generic time-independent models with a number of parameters incorporated. While these parameters quantify the uncertainties surrounding the mud rheology, the tuning of each parameter fo... Read More about Modification of the Vipulanandan rheological model with correlation for temperature and electrolyte effect on drilling muds..

Performance assessment of cadmium telluride-based semi-transparent glazing for power saving in façade buildings. (2019)
Journal Article
ALRASHIDI, H., ISSA, W., SELLAMI, N., GHOSH, A., MALLICK, T.K. and SUNDARAM, S. 2020. Performance assessment of cadmium telluride-based semi-transparent glazing for power saving in façade buildings. Energy and buildings [online], 215, article ID 109585. Available from: https://doi.org/10.1016/j.enbuild.2019.109585

Façade buildings are generally highly glazed and energy-intensive especially in countries with hot weather. Power consumption in these buildings is even more significant when air conditioning (AC) is added to the figures. Building with semi-transpare... Read More about Performance assessment of cadmium telluride-based semi-transparent glazing for power saving in façade buildings..

Renewable energy for sustainable growth and development: an evaluation of law and policy of Bangladesh. (2019)
Journal Article
KARIM, M.E., KARIM, R., ISLAM, M.T., MUHAMMAD-SUKKI, F., BANI, N.A. and MUHTAZARUDDIN, M.N. 2019. Renewable energy for sustainable growth and development: an evaluation of law and policy of Bangladesh. Sustainability [online], 11(20), article ID 5774. Available from: https://doi.org/10.3390/su11205774

Bangladesh’s constant growth with an annual 6% plus Gross Domestic Product (GDP) for more than the last two decades and achievements in other socio-economic metrics in recent times is impressive and recognized by various global authoritative bodies.... Read More about Renewable energy for sustainable growth and development: an evaluation of law and policy of Bangladesh..

Heteroatom-mediated interactions between ruthenium single atoms and an MXene support for efficient hydrogen evolution. (2019)
Journal Article
RAMALINGAM, V., VARADHAN, P., FU, H.-C., KIM, H., ZHANG, D., CHEN, S., SONG, L., MA, D., WANG, Y., ALSHAREEF, H.N. and HE, J.-H. 2019. Heteroatom-mediated interactions between ruthenium single atoms and an MXene support for efficient hydrogen evolution. Advanced materials [online], 31(48), article number 1903841. Available from: https://doi.org/10.1002/adma.201903841

A titanium carbide (Ti3C2Tx) MXene is employed as an efficient solid support to host a nitrogen (N) and sulfur (S) coordinated ruthenium single atom (RuSA) catalyst, which displays superior activity toward the hydrogen evolution reaction (HER). X-ray... Read More about Heteroatom-mediated interactions between ruthenium single atoms and an MXene support for efficient hydrogen evolution..

Synergistic effects of halloysite and carbon nanotubes (HNTs + CNTs) on the mechanical properties of epoxy nanocomposites. (2019)
Journal Article
SAHARUDIN, M.S., ATIF, R., HASBI, S., NAZRI, M.N.A., SAIDIN, N.U. and ABDULLAH, Y. 2019. Synergistic effects of halloysite and carbon nanotubes (HNTs + CNTs) on the mechanical properties of epoxy nanocomposites. AIMS materials science [online], 6(6), pages 900-910. Available from: https://doi.org/10.3934/matersci.2019.6.900

The synergistic effects of halloysite nanotubes (HNTs) and carbon nanotubes (CNTs) on the mechanical properties of epoxy nanocomposites were investigated. The addition of hybrid nanofillers (0.5 wt% HNTs-0.5 wt% CNTs) has significantly increased the... Read More about Synergistic effects of halloysite and carbon nanotubes (HNTs + CNTs) on the mechanical properties of epoxy nanocomposites..

Recent developments in graphene oxide/epoxy carbon fiber-reinforced composites. (2019)
Journal Article
KEYTE, J., PANCHOLI, K. and NJUGUNA, J. 2019. Recent developments in graphene oxide/epoxy carbon fiber-reinforced composites. Frontiers in materials [online], 6, article ID 224. Available from: https://doi.org/10.3389/fmats.2019.00224

The two-dimensional macro molecule graphene and its derivatives have widely been investigated for their application as nanofiller in carbon fibre-reinforced composites (CFRC). Research has progressed from techniques that simply mix graphene as a mixi... Read More about Recent developments in graphene oxide/epoxy carbon fiber-reinforced composites..

An investigation into the performance and diagnostics from different chordal integration schemes in asymmetric flow. (2019)
Journal Article
ARNOULD, P. 2020. An investigation into the performance and diagnostics from different chordal integration schemes in asymmetric flow. Flow measurement and instrumentation [online], 72, article ID 101644. Available from: https://doi.org/10.1016/j.flowmeasinst.2019.101644

The purpose of the work is firstly to explore the proposal from a previous North Sea Flow Measurement Workshop paper that increasing the number of chordal locations above 4 yields little improvement in the performance of ultrasonic flow meters. Secon... Read More about An investigation into the performance and diagnostics from different chordal integration schemes in asymmetric flow..

Exploration of elastomeric and polymeric liquid crystals with photothermal actuation: a review. (2019)
Journal Article
RASTOGI, P., NJUGUNA, J. and KANDASUBRAMANIAN, B. 2019. Exploration of elastomeric and polymeric liquid crystals with photothermal actuation: a review. European polymer journal [online], 121, article ID. 109287. Available from: https://doi.org/10.1016/j.eurpolymj.2019.109287

Recent research in soft materials is an exhilarating category which has been transcending boundaries for variety of functional applications. This category also stems liquid crystals whose stimuli-responsive feature has fantasized researchers for appl... Read More about Exploration of elastomeric and polymeric liquid crystals with photothermal actuation: a review..

A low-cost tonometer alternative: a comparison between photoplethysmogram and finger ballistocardiogram and validation against tonometric waveform. (2019)
Journal Article
JANJUA, G.M.W., FINLAY, D., GULDENRING, D., HAQ, A.U. and MCLAUGHLIN, J. 2019. A low-cost tonometer alternative: a comparison between photoplethysmogram and finger ballistocardiogram and validation against tonometric waveform. IEEE access [online], 7, pages 142787-142795. Available from: https://doi.org/10.1109/ACCESS.2019.2944212

Hypertension is a silent killer and one-third of its sufferers are unaware of its presence. Tonometric devices, like SphygmoCor, Compilor etc., represent the gold standard in pulse wave velocity (PWV) and augmentation index (AIx) measurements which a... Read More about A low-cost tonometer alternative: a comparison between photoplethysmogram and finger ballistocardiogram and validation against tonometric waveform..

Photovoltaic expansion-limit through a net energy metering scheme for selected Malaysian public hospitals. (2019)
Journal Article
AMRAN, M.E., MUHTAZARUDDIN, M.N., MUHAMMAD-SUKKI, F., BANI, N.A., AHMAD ZAIDI, T.Z., KAMALUDDIN, K.A. and ARDILA-REY, J.A. 2019. Photovoltaic expansion-limit through a net energy metering scheme for selected Malaysian public hospitals. Sustainability [online], 11(18), article 5131. Available from: https://doi.org/10.3390/su11185131

This paper presents an optimization approach in determining the expansion-limit of Renewable Distributed Generation (DG) capacity through a Net Energy Metering (NEM) scheme specifically for selected Malaysian public hospitals. In this study, the tota... Read More about Photovoltaic expansion-limit through a net energy metering scheme for selected Malaysian public hospitals..

Investigation of slug-churn flow induced transient excitation forces at pipe bend. (2019)
Journal Article
HOSSAIN, M., CHINENYE-KANU, N.M., DROUBI, G.M. and ISLAM, S.Z. 2019. Investigation of slug-churn flow induced transient excitation forces at pipe bend. Journal of fluids and structures [online], 91, article ID 102733. Available from: https://doi.org/10.1016/j.jfluidstructs.2019.102733

Numerical simulations of two-phase flow induced fluctuating forces at a pipe bend have been carried out to study the characteristics of multiphase flow induced vibration (FIV). The multiphase flow patterns and turbulence were modelled using the volum... Read More about Investigation of slug-churn flow induced transient excitation forces at pipe bend..

Novel method of healing the fibre reinforced thermoplastic composite: a potential model for offshore applications. (2019)
Journal Article
GUPTA, R., HUO, D., WHITE, M., JHA, V., STENNING, G.B.G. and PANCHOLI, K. 2019. Novel method of healing the fibre reinforced thermoplastic composite: a potential model for offshore applications. Composites communications [online], 16, pages 67-78. Available from: https://doi.org/10.1016/j.coco.2019.08.014

Continuous fibre reinforced thermoplastic composites are increasingly finding their use as engineering materials in many industries due to the excellent fire, smoke and toxicity performance. However, the composite component produced using automated c... Read More about Novel method of healing the fibre reinforced thermoplastic composite: a potential model for offshore applications..

Multi-objective optimization for sustainable turning Ti6Al4V alloy using grey relational analysis (GRA) based on analytic hierarchy process (AHP). (2019)
Journal Article
YOUNAS, M., JAFFERY, S.H.I., KHAN, M., KHAN, M.A., AHMAD, R., MUBASHAR, A. and ALI, L. 2019. Multi-objective optimization for sustainable turning Ti6Al4V alloy using grey relational analysis (GRA) based on analytic hierarchy process (AHP). International journal of advanced manufacturing technology [online], 105(1-4), pages 1175-1188. Available from: https://doi.org/10.1007/s00170-019-04299-5

Sustainable machining necessitates energy-efficient processes, longer tool lifespan, and greater surface integrity of the products in modern manufacturing. However, when considering Ti6Al4V alloy, these objectives turn out to be difficult to achieve... Read More about Multi-objective optimization for sustainable turning Ti6Al4V alloy using grey relational analysis (GRA) based on analytic hierarchy process (AHP)..

Photovoltaic-integrated review and expansion need in green building landscape for bridging the Malaysian RE policy. (2019)
Journal Article
AMRAN, M.E., MUHTAZARUDDIN, M.N., BANI, N.A., RAHAMAN, S.A.S.A., YUSOFF, N.M., AZIZUL, M.H. and MUHAMMAD-SUKKI, F. 2020. Photovoltaic-integrated review and expansion need in green building landscape for bridging the Malaysian RE policy. Indonesian journal of electrical engineering and computer science [online], 17(1), pages 27-35. Available from: https://doi.org/10.11591/ijeecs.v17.i1.pp27-35

A literature review is presented specifically on the photovoltaic (PV) as a distributed generation (DG) integration approach and the extensiveness through renewable energy (RE) assessment criteria in current green building rating system (GBRS) to: de... Read More about Photovoltaic-integrated review and expansion need in green building landscape for bridging the Malaysian RE policy..

Impact of electrical topology, capacity factor and line length on economic performance of offshore wind investments. (2019)
Journal Article
KUCUKSARI, S., ERDOGAN, N. and CALI, U. 2019. Impact of electrical topology, capacity factor and line length on economic performance of offshore wind investments. Energies [online], 12(6), article 3191. Available from: https://doi.org/10.3390/en12163191

In this study, an economic performance assessment of offshore wind investments is investigated through electrical topology, capacity factor and line length. First, annual energy yield production and electrical system losses for AC and DC offshore win... Read More about Impact of electrical topology, capacity factor and line length on economic performance of offshore wind investments..

Predictive analytics for the Vipulanandan rheological model and its correlative effect for nanoparticle modification of drilling mud. (2019)
Journal Article
AFOLABI, R.O., YUSUF, E.O., OKONJI, C.V. and NWOBODO, S.C. 2019. Predictive analytics for the Vipulanandan rheological model and its correlative effect for nanoparticle modification of drilling mud. Journal of petroleum science and engineering [online], 183, article ID 106377. Available from: https://doi.org/10.1016/j.petrol.2019.106377

Modelling the flow of nanoparticle modified drilling mud (or nano-drilling muds) requires the use of existing generic time-independent models with the addition of nanoparticle terms having a number of parameters incorporated. These parameters quantif... Read More about Predictive analytics for the Vipulanandan rheological model and its correlative effect for nanoparticle modification of drilling mud..

Hydrophobically associating polymers for enhanced oil recovery, part b: a review of modelling approach to flow in porous media. (2019)
Journal Article
AFOLABI, R.O., OLUYEMI, G.F., OFFICER, S. and UGWU, J.O. 2019. Hydrophobically associating polymers for enhanced oil recovery, part b: a review of modelling approach to flow in porous media. Journal of molecular liquids [online], 293, article ID 111495. Available from: https://doi.org/10.1016/j.molliq.2019.111495

Polymer flow in porous media represents an entirely different scenario compared to bulk flow analysis using viscometers. This is due to the geometry and configuration of the medium which is made up of converging-diverging flow paths. In this article,... Read More about Hydrophobically associating polymers for enhanced oil recovery, part b: a review of modelling approach to flow in porous media..

Optimal distributed generation in green building assessment towards line loss reduction for Malaysian public hospital. (2019)
Journal Article
AMRAN, M.E., MUHTAZARUDDIN, M.N., BANI, N.A., KAIDI, H.M., HASSAN, M.Z., SARIP, S. and MUHAMMAD-SUKKI, F. 2019. Optimal distributed generation in green building assessment towards line loss reduction for Malaysian public hospital. Bulletin of electrical engineering and informatics [online], 8(4), pages 1180-1188. Available from: https://doi.org/10.11591/eei.v8i4.1624

This paper presents an optimization approach for criteria setting of Renewable Distributed Generation (DG) in the Green Building Rating System (GBRS). In this study, the total line loss reduction is analyzed and set as the main objective function in... Read More about Optimal distributed generation in green building assessment towards line loss reduction for Malaysian public hospital..