All Outputs (7)

Rapid multifunctional composite part manufacturing using controlled in-situ polymerization of PA6 nanocomposite. (2019)
Journal Article
GUPTA, R., STAKEVICIUS, R. and PANCHOLI, K. 2019. Rapid multifunctional composite part manufacturing using controlled in-situ polymerization of PA6 nanocomposite. Procedia CIRP [online], 85: proceedings of 2nd CIRP conference on composite material parts manufacturing (CIRP-CCMPM 2019), 10-11 October 2019, Sheffield, UK, pages 61-65. Available from: https://doi.org/10.1016/j.procir.2019.10.003

Currently, mass composite manufacturing is dominated by the fiber-reinforced thermosets due to the ease of its processing. However, the addition of multifunctionality to the thermoset composite requires an additional step of manufacturing. This work... Read More about Rapid multifunctional composite part manufacturing using controlled in-situ polymerization of PA6 nanocomposite..

Comparative evaluation of the effect of pore size and temperature on gas transport in nano-structured ceramic membranes for biogas upgrading. (2019)
Journal Article
OGUNLUDE, P., ABUNUMAH, O., ORAKWE, I., SHEHU, H., MUHAMMAD-SUKKI, F. and GOBINA, E. 2019. Comparative evaluation of the effect of pore size and temperature on gas transport in nano-structured ceramic membranes for biogas upgrading. WEENTECH proceedings in energy [online], 5(1): proceedings of the 4th International conference on energy, environment and economics (ICEEE2019), 20-22 August 2019, Edinburgh, UK, pages 195-205. Available from: https://doi.org/10.32438/WPE.8319

As a result of rising economies and environmental constraints, the demand for clean and renewable sources of energy is fast increasing. Biogas is a renewable form of energy that fits all expectations in terms of delivery, cost, and greenhouse emissio... Read More about Comparative evaluation of the effect of pore size and temperature on gas transport in nano-structured ceramic membranes for biogas upgrading..

Zinc oxide nanoparticles modified-carbon paste electrode used for the electrochemical determination of Gallic acid. (2019)
Journal Article
CHIKERE, C., FAISAL, N.H., KONG THOO LIN, P. and FERNANDEZ, C. 2019. Zinc oxide nanoparticles modified-carbon paste electrode used for the electrochemical determination of Gallic acid. Journal of physics: conference series [online], 1310: proceedings of 2018 Applied nanotechnology and nanoscience international conference (ANNIC 2018), 22-24 October 2018, Berlin, Germany, article ID 012008. Available from: https://doi.org/10.1088/1742-6596/1310/1/012008

Zinc oxide nanoparticles (nano-ZnO) was used to modify carbon paste electrode (CPE) for a fast and sensitive electrochemical determination of gallic acid (GA). The study was carried out using cyclic voltammetry (CV) and differential voltammetry (DPV)... Read More about Zinc oxide nanoparticles modified-carbon paste electrode used for the electrochemical determination of Gallic acid..

Development of a ring cavity-based fibre optic sensor for MR-compatible medical sensing applications. (2019)
Journal Article
BHAVSAR, K., VISWAMBARAN, V., JOHNY, J., KAILASNATH, M., MELZER, A. and PRABHU, R. 2019. Development of a ring cavity-based fibre optic sensor for MR-compatible medical sensing applications. IOP conference series: materials science and engineering [online], 499: proceedings of the 4th International conference on structural nano composites (NANOSTRUC 2018), 23-24 May 2018, Berlin, Germany, article number 012013. Available from: https://doi.org/10.1088/1757-899x/499/1/012013

Advances in robotic systems and rapid developments in minimally invasive surgery (MIS) have made their use possible in the operating room due to many distinct advantages offered by MIS over conventional surgical procedures. The constant increase of m... Read More about Development of a ring cavity-based fibre optic sensor for MR-compatible medical sensing applications..

Effect of silver incorporation on the structural and morphological characteristics of RF sputtered indium oxide films. (2019)
Journal Article
SILPA SATHEESH, B., KAVITHA, V.S., KRISHNAN, R., CHALANA, S.R., SURESH, S., PRABHU, R. and MAHADEVAN PILLAI, V.P. 2019. Effect of silver incorporation on the structural and morphological characteristics of RF sputtered indium oxide films. IOP conference series: materials science and engineering [online], 499: proceedings of the 4th International conference on structural nano composites (NANOSTRUC 2018), 23-24 May 2018, Berlin, Germany, article number 012001. Available from: https://doi.org/10.1088/1757-899x/499/1/012001

Radio frequency (RF) magnetron sputtered silver incorporated indium oxide thin films were prepared and their structural and morphological properties were studied using micro- Raman spectroscopy, Atomic Force Microscopy (AFM), Field Emission Scanning... Read More about Effect of silver incorporation on the structural and morphological characteristics of RF sputtered indium oxide films..

Investigations on sensitivity enhancement of SPR biosensor using tunable wavelength and graphene layers. (2019)
Journal Article
BHAVSAR, K. and PRABHU, R. 2019. Investigations on sensitivity enhancement of SPR biosensor using tunable wavelength and graphene layers. IOP conference series: materials science and engineering [online], 499: proceedings of the 4th International conference on structural nano composites (NANOSTRUC 2018), 23-24 May 2018, Berlin, Germany, article number 012008. Available from: https://doi.org/10.1088/1757-899x/499/1/012008

Surface plasmon resonance (SPR) is a well-known, rapid and sensitive technique used for probing the biomolecular interactions in real time. Several new approaches have been suggested to improve the sensitivity of SPR sensors over the last two decades... Read More about Investigations on sensitivity enhancement of SPR biosensor using tunable wavelength and graphene layers..

Design of a DC-DC converter in residential solar photovoltaic system. (2019)
Journal Article
DARAMEIČIKAS, M., MUHAMMAD-SUKI, F., ABU-BAKAR, S.H., SELLAMI, N., BANI, N.A., MAS’UD, A.A. and ARDILA-REY, J.A. 2019. Design of a DC-DC converter in residential solar photovoltaic system. Journal of physics: conference series [online], 1174: proceedings of 2nd International women in science, engineering and technology conference 2018.(WiSET 2018), 17-19 July 2018, Kuala Lumpur, MY, article ID 012006. Available from: https://doi.org/10.1088/1742-6596/1174/1/012006

This study looks at buck type switch mode power supplies (SMPS) suitability in residential solar photovoltaic (PV) applications, of which several factors affecting the desired output response are identified. The main objective of the study is to desi... Read More about Design of a DC-DC converter in residential solar photovoltaic system..