Dr Shahneel Saharudin's Outputs (36)

Assessment of machinability of Ti6Al4V alloy under dry conditions. (2024)
Presentation / Conference Contribution
YOUNAS, M., SAMBO, A.M., ASIM, T. and SAHARUDIN, S. 2024. Assessment of machinability of Ti6Al4V alloy under dry conditions. MATEC web of conferences [online], 401: proceedings of the 21st International conference on manufacturing research (ICMR 2024), 28-30 August 2024, Glasgow, UK, article number 06005. Available from: https://doi.org/10.1051/matecconf/202440106005

Titanium alloys pose significant challenges during machining, necessitates a thorough investigation into the impact of process parameters on machining Ti6Al4V alloy. This study investigates into the machinability of Ti6Al4V alloy under dry machining... Read More about Assessment of machinability of Ti6Al4V alloy under dry conditions..

Enhanced mechanical, thermal, and morphological properties of waste PET plastics reinforced with coated biodegradable kenaf fibers for infrastructure applications. (2024)
Journal Article
OWEN, M.M., WONG, L.S., ACHUKWU, E.O., SAHARUDIN, M.S. and AKIL, H.M. 2024. Enhanced mechanical, thermal, and morphological properties of waste PET plastics reinforced with coated biodegradable kenaf fibers for infrastructure applications. Construction and building materials [online], 442, article number 137659. Available from: https://doi.org/10.1016/j.conbuildmat.2024.137659

The surge in polyethylene terephthalate (PET) plastic bottle production has led to a rise in waste PET plastics. Recycling these waste PET plastics for infrastructural purposes offers a feasible solution to curb environmental pollution and the climat... Read More about Enhanced mechanical, thermal, and morphological properties of waste PET plastics reinforced with coated biodegradable kenaf fibers for infrastructure applications..

Design and fabrication of a wrist splint for burn patient rehabilitation using 3D printing technologies. (2023)
Journal Article
CANN, C. and SAHARUDIN, M.S. 2023. Design and fabrication of a wrist splint for burn patient rehabilitation using 3D printing technologies. Journal of physics: conference series [online], 2643: proceedings of the 8th International conference on applications and design in mechanical engineering 2023 (ICADME 2023), 4-5 September 2023, Kuala Lumpur, Malaysia, article 012003. Available from: https://doi.org/10.1088/1742-6596/2643/1/012003

Severe and common injuries involving burns to the hands and wrists can often lead to permanent loss of motion. The issue is exacerbated by the delicate nature of tendons and muscles in the hands, along with the formation of scar tissue. While rehabil... Read More about Design and fabrication of a wrist splint for burn patient rehabilitation using 3D printing technologies..

Carbon fibers/nickel nanocomposite particles reinforced ethylene vinyl acetate stretchable conductive polymer: fabrication, microstructure, electrical and mechanical properties. (2023)
Journal Article
DAOUSH, W.M., AL-ZUAIR, A.F., SAHARUDIN, M.S. and INAM, F. 2024. Carbon fibers/nickel nanocomposite particles reinforced ethylene vinyl acetate stretchable conductive polymer: fabrication, microstructure, electrical and mechanical properties. Carbon letters [online], 34(5), pages 1301-1316. Available from: https://doi.org/10.1007/s42823-023-00630-z

Carbon fibers of polyacrylonitrile (PAN) type were coated with nickel nanoparticles using a chemical reduction method in alkaline hydrazine bath. The carbon fibers were firstly heated at 400°C and then chemically treated in hydrochloric acid followed... Read More about Carbon fibers/nickel nanocomposite particles reinforced ethylene vinyl acetate stretchable conductive polymer: fabrication, microstructure, electrical and mechanical properties..

Development of coconut oil/capric acid eutectic phase change material with graphene as latent thermal energy storage. (2023)
Journal Article
HASBI, S., LEONG, K.Y., KU AHMAD, K.Z., ABDUL RAHIM, N. and SAHARUDIN, M.S. 2023. Development of coconut oil/capric acid eutectic phase change material with graphene as latent thermal energy storage. International journal of automotive and mechanical engineering [online], 20(1), pages 10247-10257. Available from: https://doi.org/10.15282/ijame.20.1.2023.07.0792

In this study, a eutectic mixture of coconut oil (CO)-capric acid (CA) was synthesised and investigated with the aim of producing newly eutectic phase change materials (PCMs) with improved thermal properties as thermal energy storage (TES). Although... Read More about Development of coconut oil/capric acid eutectic phase change material with graphene as latent thermal energy storage..

Recent advances in MXene composites research, applications and opportunities. (2023)
Presentation / Conference Contribution
SAHARUDIN, M.S., AYUB, A., HASBI, S., MUHAMMAD-SUKKI, F., SHYHA, I. and INAM, F. [2023]. Recent advances in MXene composites research, applications and opportunities. Materials today: proceedings [online], In Press. Proceedings of the 2022 Composite sciences and technology international conference (COMSAT2022), 22-23 August 2022, Johor, Malaysia. Available from: https://doi.org/10.1016/j.matpr.2023.02.435

MXene composites have emerged as a promising class of materials due to their exceptional properties and versatility in various applications. In recent years, researchers have made significant progress in the development and characterization of MXene... Read More about Recent advances in MXene composites research, applications and opportunities..

Carbon nanotubes after 30 years of research, development and commercialisation. (2022)
Journal Article
SAHARUDIN, M.S., SAGAR IQBAL, S. and INAM, F. [2022]. Carbon nanotubes after 30 years of research, development and commercialisation. Nanomedicine and nanotechnology journal [online], Rapid Release. Available from: https://www.scientificliterature.org/Nanomedicine/Nanomedicine-22-131.pdf

The commentary discusses the last three decades of research, development and successful commercialisation of Carbon Nanotubes (CNTs) and their related composites. Whilst the number of publications are on the decline and despite of major technical cha... Read More about Carbon nanotubes after 30 years of research, development and commercialisation..

Tensile and corrosion resistance studies of MXenes/nanocomposites: a review. (2022)
Presentation / Conference Contribution
SAHARUDIN, M.S., CHE NASIR, N.A. and HASBI, S. 2022. Tensile and corrosion resistance studies of MXenes/nanocomposites: a review. In Ismail, A., Dahalan, W.M. and Öchsner A. (eds.). Design in maritime engineering: contributions from the 2nd International conference on marine and advanced technologies 2021 (ICMAT 2021), 24 August 2021, [virtual conference]. Advanced structured materials, 167. Cham: Springer [online], pages 189-198. Available from: https://doi.org/10.1007/978-3-030-89988-2_14

MXenes are a relatively new and interesting class of two-dimensional materials with diverse compositions and outstanding characteristics such as dispersibility and metallic conductivity. MXenes appear to be promising fillers for polymer nanocomposite... Read More about Tensile and corrosion resistance studies of MXenes/nanocomposites: a review..

Tensile properties of epoxy/1 wt% graphene nanocomposites prepared with ethanol. (2021)
Presentation / Conference Contribution
SAHARUDIN, M.S., HASBI, S., OKOLO, C. and INAM, F. 2021. Tensile properties of epoxy/1 wt% graphene nanocomposites prepared with ethanol. IOP conference series: materials science and engineering [online], 1072: proceedings of the 2020 Joint international conference of the 2nd International conference on industrial and system engineering (IConISE) and the 7th Annual conference on industrial and system engineering (ACISE), 22-23 July 2020, Surabaya, Indonesia, article 012009. Available from: https://doi.org/10.1088/1757-899X/1072/1/012009

In this research, solution casting technique was applied to produce four types of nanocomposites. Different ethanol dosages; 0g, 1g, 3g, and 5g were used to disperse graphene in the epoxy matrix. It was observed that 1g dosage of ethanol was the most... Read More about Tensile properties of epoxy/1 wt% graphene nanocomposites prepared with ethanol..

The processing of epoxy/multi-layer graphene nanocomposites: effects of acetone on properties. (2019)
Journal Article
SAHARUDIN, M.S., HASBI, S., OKOLO, C., WEI, J. and JUSOH, A.R. 2019. The processing of epoxy/multi-layer graphene nanocomposites: effects of acetone on properties. Journal of engineering science and technology [online], 14(6), pages 3131-3142. Available from: https://tinyurl.com/57nrhehp

Epoxy/multi-layer graphene nanocomposites prepared with different acetone dosages (0 ml, 25 ml and 50 ml) were successfully produced. This study investigates the effectiveness of short-term dispersion and small dosages of acetone on the properties of... Read More about The processing of epoxy/multi-layer graphene nanocomposites: effects of acetone on properties..

The processing of epoxy/1 wt%-graphene nanocomposites: effects of ethanol on flexural properties. (2019)
Journal Article
SAHARUDIN, M.S., HASBI, S., ZULKIFLI, A. and ZAILANI, N.F. 2019. The processing of epoxy/1 wt%-graphene nanocomposites: effects of ethanol on flexural properties. International journal of innovative technology and exploring engineering [online], 9(1), pages 5440-5444. Available from: https://doi.org/10.35940/ijitee.A8105.119119

Four different types of nanocomposites were successfully produced using solution casting technique. Graphene was dispersed in four different ethanol concentrations; 0g, 1g, 2.5g, and 5g. In general, it can be observed that ethanol is an excellent age... Read More about The processing of epoxy/1 wt%-graphene nanocomposites: effects of ethanol on flexural properties..

Synergistic effects of halloysite and carbon nanotubes (HNTs + CNTs) on the mechanical properties of epoxy nanocomposites. (2019)
Journal Article
SAHARUDIN, M.S., ATIF, R., HASBI, S., NAZRI, M.N.A., SAIDIN, N.U. and ABDULLAH, Y. 2019. Synergistic effects of halloysite and carbon nanotubes (HNTs + CNTs) on the mechanical properties of epoxy nanocomposites. AIMS materials science [online], 6(6), pages 900-910. Available from: https://doi.org/10.3934/matersci.2019.6.900

The synergistic effects of halloysite nanotubes (HNTs) and carbon nanotubes (CNTs) on the mechanical properties of epoxy nanocomposites were investigated. The addition of hybrid nanofillers (0.5 wt% HNTs-0.5 wt% CNTs) has significantly increased the... Read More about Synergistic effects of halloysite and carbon nanotubes (HNTs + CNTs) on the mechanical properties of epoxy nanocomposites..

Effect of short-term water exposure on mechanical properties of multi-layer graphene and multi-walled carbon nanotubes-reinforced epoxy nanocomposites. (2018)
Journal Article
SAHARUDIN, M.S., HASBI, S., RASHID, N.M. and NORDIN, M.S.J. 2018. Effect of short-term water exposure on mechanical properties of multi-layer graphene and multi-walled carbon nanotubes-reinforced epoxy nanocomposites. Journal of engineering science and technology [online], 13(12), pages 4226-4239. Available from: https://tinyurl.com/5n687hym

The influence of short-term water absorption on the mechanical properties of Multi-Layer Graphene (MLG) and Multi-Walled Carbon Nanotubes (MWCNTs) reinforced epoxy hybrid nanocomposites were studied. Water absorption test was conducted by immersing s... Read More about Effect of short-term water exposure on mechanical properties of multi-layer graphene and multi-walled carbon nanotubes-reinforced epoxy nanocomposites..

Effect of short-term water exposure on the mechanical properties of halloysite nanotube-multi layer graphene reinforced polyester nanocomposites. (2017)
Journal Article
SAHARUDIN, M.S., ATIF, R. and INAM, F. 2017. Effect of short-term water exposure on the mechanical properties of halloysite nanotube-multi layer graphene reinforced polyester nanocomposites. Polymers [online] 9(1), article 27. Available from: https://doi.org/10.3390/polym9010027

The influence of short-term water absorption on the mechanical properties of halloysite nanotubes-multi layer graphene reinforced polyester hybrid nanocomposites has been investigated. The addition of nano-fillers significantly increased the flexural... Read More about Effect of short-term water exposure on the mechanical properties of halloysite nanotube-multi layer graphene reinforced polyester nanocomposites..

Effect of short term water exposure on the mechanical properties of halloysite nanotubes-multi layer graphene reinforced polyester nanocomposites. (2017)
Preprint / Working Paper
SAHARUDIN, M.S., ATIF, R. and INAM, F. 2017. Effect of short term water exposure on the mechanical properties of halloysite nanotubes-multi layer graphene reinforced polyester nanocomposites. Preprints [online]. Available from: https://doi.org/10.20944/preprints201701.0024.v1

The influence of short term water absorption on the mechanical properties of halloysite nanotubes-multi layer graphene reinforced polyester hybrid nanocomposites has been investigated. The addition of nano-fillers significantly increased the flexural... Read More about Effect of short term water exposure on the mechanical properties of halloysite nanotubes-multi layer graphene reinforced polyester nanocomposites..

The degradation of mechanical properties in halloysite nanoclay-polyester nanocomposites exposed in seawater environment. (2016)
Journal Article
SAHARUDIN, M.S., WEI, J., SHYHA, I. and INAM, F. 2016. The degradation of mechanical properties in halloysite nanoclay-polyester nanocomposites exposed in seawater environment. Journal of nanomaterials [online], 2016, article ID 2604631. Available from: https://doi.org/10.1155/2016/2604631

Polyester based polymers are extensively used in aggressive marine environments; however, inadequate data is available on the effects of the seawater on the polyester based nanocomposites mechanical properties. This paper reports the effect of seawat... Read More about The degradation of mechanical properties in halloysite nanoclay-polyester nanocomposites exposed in seawater environment..