Outputs (17)

Thermal spray coatings for molten salt facing structural parts and enabling opportunities for thermochemical cycle electrolysis. (2024)
Journal Article
FAISAL, N.H., RAJENDRAN, V., PRATHURU, A., HOSSAIN, M., MUTHUKRISHNAN, R., BALOGUN, Y., PANCHOLI, K., HUSSAIN, T., LOKACHARI, S., HORRI, B.A. and BANKHEAD, M. 2024. Thermal spray coatings for molten salt facing structural parts and enabling opportunities for thermochemical cycle electrolysis. Engineering reports [online], Early View. Available from: https://doi.org/10.1002/eng2.12947

Thermochemical water splitting stands out as the most efficient techniques to produce hydrogen through electrolysis at a high temperature, relying on a series of chemical reactions within a loop. However, achieving a durable thermochemical cycle sys... Read More about Thermal spray coatings for molten salt facing structural parts and enabling opportunities for thermochemical cycle electrolysis..

Indium tin oxide thin film preparation and property relationship for humidity sensing: a review. (2024)
Journal Article
RAJENDRAN, V., PRATHURU, A., FERNANDEZ, C., SUJATHA, D., PANDA, S.K. and FAISAL, N.H. [2024]. Indium tin oxide thin film preparation and property relationship for humidity sensing: a review. Engineering reports [online], Early View. Available from: https://doi.org/10.1002/eng2.12836

This review aims to present a critical overview of indium tin oxide (ITO) thin film preparation methods, structure–property relationship and its application in humidity sensing. A range of passive and active humidity sensors with thin films (based on... Read More about Indium tin oxide thin film preparation and property relationship for humidity sensing: a review..

Machine learning model of acoustic signatures: towards digitalised thermal spray manufacturing. (2023)
Journal Article
VISWANATHAN, V., MCCLOSKEY, A., MATHUR, R., NGUYEN, D.T., FAISAL, N.H., PRATHURU, A., LLAVORI, I., MURPHY, A., TIWARI, A., MATTHEWS, A., AGRAWAL, A. and GOEL, S. 2024. Machine learning model of acoustic signatures: towards digitalised thermal spray manufacturing. Mechanical systems and signal processing [online], 208, article number 111030. Available from: https://doi.org/10.1016/j.ymssp.2023.111030

Thermal spraying, an important industrial surface manufacturing process in sectors such as aerospace, energy and biomedical, remains a skill intensive process often involving multiple trial runs impacting the yield. The core research challenge in dig... Read More about Machine learning model of acoustic signatures: towards digitalised thermal spray manufacturing..

Acoustic emission sensor-assisted process monitoring of air plasma-sprayed titanium deposition. (2023)
Journal Article
VISWANATHAN, V., PRATHURU, A., FAISAL, N.H. and GOEL, S. 2023. Acoustic emission sensor-assisted process monitoring of air plasma-sprayed titanium deposition. Journal of thermal spray technology [online], 32(8), pages 2763-2777. Available from: https://doi.org/10.1007/s11666-023-01663-6

Acoustic emission is a sensing technique that offers the potential benefit for its use as an in situ monitoring tool for a wide range of manufacturing processes. This work attempts to highlight the robustness of using acoustic emission (AE) data for... Read More about Acoustic emission sensor-assisted process monitoring of air plasma-sprayed titanium deposition..

Investigation of wave propagation pattern in a multilayer planar structure. (2023)
Journal Article
RAJENDRAN, V., PRATHURU, A., FERNANDEZ, C. and FAISAL, N.H. 2023. Investigation of wave propagation pattern in a multilayer planar structure. e-Journal of nondestructive testing [online], Special Issue NDE-Nuclear-2023: proceedings of the 2nd Non-destructive examination in nuclear international conference (NDE in Nuclear 2023), 27-29 June 2023, Sheffield, UK, article number 28270. Available from: https://www.ndt.net/search/docs.php3?id=28270

Acoustic emission (AE) is used to monitor conditions of various structures across many industrial sectors, including containment vessels or storage tanks of nuclear materials. Periodic monitoring, inspection and analysis of structure conditions can h... Read More about Investigation of wave propagation pattern in a multilayer planar structure..

Corrosion monitoring at the interface using sensors and advanced sensing materials: methods, challenges and opportunities. (2023)
Journal Article
RAJENDRAN, V., PRATHURU, A., FERNANDEZ, C. and FAISAL, N.H. 2023. Corrosion monitoring at the interface using sensors and advanced sensing materials: methods, challenges and opportunities. Corrosion engineering, science and technology [online], 58(3), pages 281-321. Available from: https://doi.org/10.1080/1478422X.2023.2180195

Detecting and monitoring of corrosion is one of the major challenges in insulated metallic structures, or structures with one or more than one interface. This review paper aims to consolidate scattered literature on laboratory system-based corrosion... Read More about Corrosion monitoring at the interface using sensors and advanced sensing materials: methods, challenges and opportunities..

Numerical prediction of the effect of thermal plume of a standing human on the airborne aerosol flow in a room: assessment of the social distancing rule. (2022)
Journal Article
HOSSAIN, M., CHINENYE-KANU, N., FAISAL, N.H., PRATHURU, A., ASIM, T. and BANIK, S. 2023. Numerical prediction of the effect of thermal plume of a standing human on the airborne aerosol flow in a room: assessment of the social distancing rule. Aerosol science and engineering [online], 7(1), pages 96-106. Available from: https://doi.org/https://doi.org/10.1007/s41810-022-00165-2

The purpose of the study is to investigate the dispersion of droplet nuclei/aerosol which are produced during coughing and continuous talking to quantify the risk of infection due to airborne disease transmission. A three-dimensional modelling of aer... Read More about Numerical prediction of the effect of thermal plume of a standing human on the airborne aerosol flow in a room: assessment of the social distancing rule..

Application of thermal spray coatings in electrolysers for hydrogen production: advances, challenges, and opportunities. (2022)
Journal Article
FAISAL, N.H., PRATHURU, A., AHMED, R. et al. 2022. Application of thermal spray coatings in electrolysers for hydrogen production: advances, challenges, and opportunities. ChemNanoMat [online], 8(12), article number e202200384. Available from: https://doi.org/10.1002/cnma.202200384

Thermal spray coatings have the advantage of providing thick and functional coatings from a range of engineering materials. The associated coating processes provide good control of coating thickness, morphology, microstructure, pore size and porosity... Read More about Application of thermal spray coatings in electrolysers for hydrogen production: advances, challenges, and opportunities..

Application of pencil lead break (PLB) point source in the detection of interfacial defects in adhesive bonds. (2022)
Journal Article
PRATHURU, A., FAISAL, N., STEEL, J. and JIHAN, S. 2022. Application of pencil lead break (PLB) point source in the detection of interfacial defects in adhesive bonds. Journal of nondestructive evaluation [online], 41(4), article 65. Available from: https://doi.org/10.1007/s10921-022-00898-7

The presence of kissing bonds (zero-thickness disbond) along the interface of an adhesive bond is highly detrimental to its strength and longevity. The detection of these kind of defects has previously been attempted using several techniques such as... Read More about Application of pencil lead break (PLB) point source in the detection of interfacial defects in adhesive bonds..

Thermal spray coatings for electromagnetic wave absorption and interference shielding: a review and future challenges. (2022)
Journal Article
FASIAL, N.H., AHMED, R., SELLAMI, N. et al. 2022. Thermal spray coatings for electromagnetic wave absorption and interference shielding: a review and future challenges. Advanced engineering materials [online], 24(7), article number 2200171. Available from: https://doi.org/10.1002/adem.202200171

This review aims to consolidate scattered literature on thermally sprayed coatings with nonionizing electromagnetic (EM) wave absorption and shielding over specific wavelengths potentially useful in diverse applications (e.g., microwave to millimeter... Read More about Thermal spray coatings for electromagnetic wave absorption and interference shielding: a review and future challenges..