All Outputs (71)

The crystallinity and thermal degradation behaviour of polyamide 6/oil based mud fillers (PA6/OBMFs) nanocomposites. (2018)
Journal Article
SIDDIQUE, S., KWOFFIE, L., ADDAE-AFOAKWA, K., YATES, K. and NJUGUNA, J. 2019. The crystallinity and thermal degradation behaviour of polyamide 6/oil based mud fillers (PA6/OBMFs) nanocomposites. Polymer degradation and stability [online], 159, pages 139-152. Available from: https://doi.org/10.1016/j.polymdegradstab.2018.11.004

The crystallinity and thermal degradation behaviours of Polyamide 6/Oil Based Mud Fillers (PA6/OBMFs) nanocomposites have been investigated using DSC and TGA. TGA indicates the onset decomposition temperature of D1/2 (half-decomposition) is 16º C hig... Read More about The crystallinity and thermal degradation behaviour of polyamide 6/oil based mud fillers (PA6/OBMFs) nanocomposites..

Mechanical structural design of a MEMS-based piezoresistive accelerometer for head injuries monitoring: a computational analysis by increments of the sensor mass moment of inertia. (2018)
Journal Article
MESSINA, M., NJUGUNA, J. and PALAS, C. 2018. Mechanical structural design of a MEMS-based piezoresistive accelerometer for head injuries monitoring: a computational analysis by increments of the sensor mass moment of inertia. Sensors [online], 18(1), article number 289. Available from: https://doi.org/10.3390/s18010289

This work focuses on the proof-mass mechanical structural design improvement of a tri-axial piezoresistive accelerometer specifically designed for head injuries monitoring where medium-G impacts are common; for example, in sports such as racing cars... Read More about Mechanical structural design of a MEMS-based piezoresistive accelerometer for head injuries monitoring: a computational analysis by increments of the sensor mass moment of inertia..

Removal of lead (II) from aqeouos waste using (CD-PCL-TiO2) bio-nanocomposites. (2017)
Journal Article
SEEMA, K.M., MAMBA, B.B., NJUGUNA, J., BAKHTIZIN, R.Z. and MISHRA, A.K. 2018. Removal of lead (II) from aqeouos waste using (CD-PCL-TiO2) bio-nanocomposites. International journal of biological macromolecules [online], 109, pages 136-142. Available from: https://doi.org/10.1016/j.ijbiomac.2017.12.046

Lead (Pb) pollution is our water system is a major concern, as this metal is toxic even at low concentration. This study aim to fabricate a bio-nanocomposite (cyclodextrin-polycaprolactone titanium dioxide) that will be used as an adsorbent for the r... Read More about Removal of lead (II) from aqeouos waste using (CD-PCL-TiO2) bio-nanocomposites..

Assessment of nanoparticles release into the environment during drilling of carbon nanotubes/epoxy and carbon nanofibres/epoxy nanocomposites. (2017)
Journal Article
STAROST, K., FRIJNS, E., VAN LAER, J., FAISAL, N., EGIZABAL, A., ELIZEXTEA, C., BLAZQUEZ, M., NELISSEN, I. and NJUGUNA, J. 2017. Assessment of nanoparticles release into the environment during drilling of carbon nanotubes/epoxy and carbon nanofibres/epoxy nanocomposites. Journal of hazardous materials [online], 340, pages 57-66. Available from: https://doi.org/10.1016/j.jhazmat.2017.06.057

The risk assessment, exposure and understanding of the release of embedded carbon nanotubes (CNTs) and carbon nanofibers (CNFs) from commercial high performance composites during machining processes is yet to be fully evaluated and quantified. In thi... Read More about Assessment of nanoparticles release into the environment during drilling of carbon nanotubes/epoxy and carbon nanofibres/epoxy nanocomposites..

The effect of nanosilica (SiO2) and nanoalumina (Al2O3) reinforced polyester nanocomposites on aerosol nanoparticle emissions into the environment during automated drilling. (2017)
Journal Article
STAROST, K., FRIJNS, E., VAN LAER, J., FAISAL, N., EGIZABAL, A., ELIZEXTEA, C., NEILSSEN, I., BALZQUEZ, M. and NJUGUNA, J. 2017. The effect of nanosilica (SiO2) and nanoalumina (Al2O3) reinforced polyester nanocomposites on aerosol nanoparticle emissions into the environment during automated drilling. Aerosol science and technology [online], 51(9), pages 1035-1046. Available from: https://doi.org/10.1080/02786826.2017.1330535

The aim of this study is to investigate the effect nanosilica and nanoalumina has on nanoparticle release from industrial nanocomposites due to drilling for hazard reduction whilst simultaneously obtaining the necessary mechanical performance. This s... Read More about The effect of nanosilica (SiO2) and nanoalumina (Al2O3) reinforced polyester nanocomposites on aerosol nanoparticle emissions into the environment during automated drilling..

Elaboration of properties of graphene oxide reinforced epoxy nanocomposites. (2017)
Journal Article
BARI, P., KHAN, S., NJUGUNA, J. and MISHRA, S. 2017. Elaboration of properties of graphene oxide reinforced epoxy nanocomposites. International journal of plastics technology [online], 21(1), pages 194-208. Available from: https://doi.org/10.1007/s12588-017-9180-9

In this research work, properties of graphene oxide (GO) based epoxy nanocomposites, prepared via the solution blending method, are elaborated. Different loadings (0.1-0.5 wt%) of GO were added into epoxy resin, and their effects were studied on thei... Read More about Elaboration of properties of graphene oxide reinforced epoxy nanocomposites..

The 3rd international conference on structural nano composites (NANOSTRUC2016). (2017)
Journal Article
NJUGUNA, J. 2017. The 3rd international conference on structural nano composites (NANOSTRUC2016). IOP conference series: materials science and engineering [online], 195: proceedings of 3rd International conference on structural nano composites (NANOSTRUC2016): Nanoscience and nanotechnologies; recent advances towards nanoproducts and applications, 12-15 September 2016, Aberdeen, UK, article 011001. Available from: https://doi.org/10.1088/1757-899X/195/1/011001

The Robert Gordon University, Aberdeen hosted The NANOSTRUC 2016 in Aberdeen (Scotland, United Kingdom). The conference focused on 'Nanoscience and Nanotechnologies – Recent Advances towards Nanoproducts and Applications'. It promoted activities in v... Read More about The 3rd international conference on structural nano composites (NANOSTRUC2016)..

Physico‐mechanical properties of nano‐polystyrene‐decorated graphene oxide–epoxy composites. (2017)
Journal Article
KHOBRAGADE, P.S., HANSORA, D.P., NAIK, J.B., NJUGUNA, J. and MISHRA, S. 2017. Physico-mechanical properties of nano polystyrene decorated graphene oxide-epoxy composites. Polymer international [online], 66(10), pages 1402-1409. Available from: https://doi.org/10.1002/pi.5392

In this work, nano polystyrene (nPS) decorated graphene oxide (GO) hybrid nanostructures were successfully synthesized using stepwise micro emulsion polymerization, and characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffractom... Read More about Physico‐mechanical properties of nano‐polystyrene‐decorated graphene oxide–epoxy composites..

Effect of multilayered nanostructures on the physico-mechanical properties of ethylene vinyl acetate-based hybrid nanocomposites. (2017)
Journal Article
KHOBRAGADE, P.S., HANSORA, D.P., NAIK, J.B., NJUGUNA, J. and MISHRA, S. 2018. Effect of multilayered nanostructures on the physico-mechanical properties of ethylene vinyl acetate-based hybrid nanocomposites. Polymer composites [online], 39(10), pages 3519-3527. Available from: https://doi.org/10.1002/pc.24371

Exfoliated graphene oxide (GO) and Mg-Al-layered double hydroxides (LDHs) nanostructures (LDHs@GO)-filled ethylene vinyl acetate (EVA)-based hybrid nanocomposites were prepared by solution reflux technique followed by injection molding. The physico-m... Read More about Effect of multilayered nanostructures on the physico-mechanical properties of ethylene vinyl acetate-based hybrid nanocomposites..

Core-double shell hybrid nanocomposites as multi-functional advanced materials. (2017)
Journal Article
KHOBRAGADE, P.S., HANSORA, D.P., NAIK, J.B., NJUGUNA, J. and MISHRA, S. 2017. Core-double shell hybrid nanocomposites as multi-functional advanced materials. Polymer bulletin [online], 74(11), pages 4681-4700. Available from: https://doi.org/10.1007/s00289-017-1983-5

In this research work, we report circular type silane-modified CaCO3 (as core) nanoparticles (NP) encapsulated with polystyrene (PS) and polymethyl methacrylate (PMMA) (as double shell layers). These core-double shell [CaCO3-PS/PMMA] hybrid nanostruc... Read More about Core-double shell hybrid nanocomposites as multi-functional advanced materials..

Preparation and analysis of multi-layered hybrid nanostructures. (2016)
Journal Article
KHOBRAGADE, P.S., HANSORA, D.P., NAIK, J.B., NJUGUNA, J. and MISHRA, S. 2016. Preparation and analysis of multi-layered hybrid nanostructures. Applied clay science [online], 132-133, pages 668-674. Available from: https://doi.org/10.1016/j.clay.2016.08.022

In this study, we report a simple and efficient (bath ultrasonication) method for the preparation of multi-functional layered hybrid nanostructures using graphene oxide (GO) and modified Mg-Al layered double hydroxides (LDH) [LDH@GO]. The functional... Read More about Preparation and analysis of multi-layered hybrid nanostructures..

Stress analysis at the interface of metal-to-metal adhesively bonded joints subjected to 4-point bending: finite element method. (2016)
Journal Article
PRATHURU, A.K., FAISAL, N.H., JIHAN, S., STEEL, J.A. and NJUGUNA, J. 2017. Stress analysis at the interface of metal-to-metal adhesively bonded joints subjected to 4-point bending: finite element method. Journal of adhesion [online], 93(11), pages 855-878. Available from: https://doi.org/10.1080/00218464.2016.1172309

This paper presents a study of stress states in two-dimensional models of metal-to-metal adhesively bonded joints subjected to 4-point flexural loading using the finite element (FE) method. The FE simulations were carried out on adhesive bonded joint... Read More about Stress analysis at the interface of metal-to-metal adhesively bonded joints subjected to 4-point bending: finite element method..

Flexural, impact, rheological and physical characterizations of POM reinforced by carbon nanotubes and paraffin oil. (2016)
Journal Article
YOUSEF, S., VISCO, A., GALTIERI, G and NJUGUNA, J. 2016. Flexural, impact, rheological and physical characterizations of POM reinforced by carbon nanotubes and paraffin oil. Polymers for advanced technologies [online], 27(10), pages 1338-1344. Available from: https://doi.org/10.1002/pat.3801

The paraffin oil dispersion technique innovated in the recent years to synthesize bulk polymer nanocomposite materials has a uniform dispersion. This research work aims to study the effect of added carbon nanotubes (CNTs) on flexural, impact and rheo... Read More about Flexural, impact, rheological and physical characterizations of POM reinforced by carbon nanotubes and paraffin oil..

Thermal, mechanical and rheological behaviors of nanocomposites based on UHMWPE/paraffin oil/carbon nanofiller obtained by using different dispersion techniques. (2016)
Journal Article
VISCO, A., YOUSEF, S., GALTIERI, G., NOCITA, D., PISTONE, A. and NJUGUNA, J. 2016. Thermal, mechanical and rheological behaviors of nanocomposites based on UHMWPE/paraffin oil/carbon nanofiller obtained by using different dispersion techniques. JOM: journal of the Minerals, Metals and Materials Society [online], 68(4), pages 1078-1089. Available from: https://doi.org/10.1007/s11837-016-1845-x

Ultra-high molecular weight polyethylene (UHMWPE) is a very attractive polymer employed as a high performance material. For its high viscosity, dispersion of fillers is considered a critical point in UHMWPE nanocomposites preparation process. Current... Read More about Thermal, mechanical and rheological behaviors of nanocomposites based on UHMWPE/paraffin oil/carbon nanofiller obtained by using different dispersion techniques..

Futuristic nanomaterials and composites: part II. (2015)
Journal Article
KIM, C-S., LEHMHUS, D., NJUGUNA, J., PARAMSOTHY, M. and SHOFNER, M.L. 2015. Futuristic nanomaterials and composites: part II. JOM: journal of the Minerals, Metals and Materials Society [online], 68(1), pages 261-264. Available from: https://doi.org/10.1007/s11837-015-1685-0

The present special topic Futuristic Nanomaterials and Composites: Part II is a continuation of last month's topic Futuristic Nanomaterials and Composites: Part I. In this continuation, inspiration is once again drawn from two conferences: (1) NANOST... Read More about Futuristic nanomaterials and composites: part II..

Wear characterizations of polyoxymethylene (POM) reinforced with carbon nanotubes (POM/CNTs) using the paraffin oil dispersion technique. (2015)
Journal Article
YOUSEF, S., VISCO, A.M., GALTIERI, G. and NJUGUNA, J. 2016. Wear characterizations of polyoxymethylene (POM) reinforced with carbon nanotubes (POM/CNTs) using the paraffin oil dispersion technique. JOM: journal of the Minerals, Metals and Materials Society [online], 68(1), pages 288-299. Available from: https://doi.org/10.1007/s11837-015-1674-3

The wear of polyoxymethylene (POM) is considered a key design parameter of polymer gears and some mechanical applications, and it determines the service time span. This work investigates the influence of carbon nanotubes (CNTs) on the specific wear r... Read More about Wear characterizations of polyoxymethylene (POM) reinforced with carbon nanotubes (POM/CNTs) using the paraffin oil dispersion technique..

Futuristic nanomaterials and composites: part I. (2015)
Journal Article
LEHMHUS, D., NJUGUNA, J. and PARAMSOTHY, M. 2015. Futuristic nanomaterials and composites: part I. JOM: journal of the Minerals, Metals and Materials Society [online], 67(12), pages 2844-2847. Available from: https://doi.org/10.1007/s11837-015-1619-x

The present special topic 'Futuristic Nanomaterials and Composites: Part I' captures the structural as well as functional aspects of nanomaterials and nanocomposites that are unique in some specific way when compared to their microscale counterparts.... Read More about Futuristic nanomaterials and composites: part I..

Compression-after-impact (CAI) performance of epoxycarbon fibre-reinforced nanocomposites using nanosilica and rubber particle enhancement. (2014)
Journal Article
NIKFAR, B. and NJUGUNA, J. 2014. Compression-after-impact (CAI) performance of epoxycarbon fibre-reinforced nanocomposites using nanosilica and rubber particle enhancement. IOP conference series: materials science and engineering [online], 64(1), Article 012009. Available from: https://doi.org/10.1088/1757-899X/64/1/012009

One of the problems in the design of automotive structures and body parts made by fibre reinforced composites is that these materials are susceptible to a small energy impact caused by for instance, accidental tool drop during maintenance or stone st... Read More about Compression-after-impact (CAI) performance of epoxycarbon fibre-reinforced nanocomposites using nanosilica and rubber particle enhancement..

A review on the effect of mechanical drilling on polymer nanocomposites. (2014)
Journal Article
STAROST, K. and NJUGUNA, J. 2014. A review on the effect of mechanical drilling on polymer nanocomposites. IOP conference series: materials science and engineering [online], 64(1), Article 012031. Available from: https://doi.org/10.1088/1757-899X/64/1/012031

Over the past decade, polymer nanocomposites have undergone intensive research and development ensued by its increasing implementation within commercial applications. Consequently, the full life-cycle performance and any health risks associated with... Read More about A review on the effect of mechanical drilling on polymer nanocomposites..

Waste to want: polymer nanocomposites using nanoclays extracted from oil based drilling mud waste. (2014)
Journal Article
ADEGBOTOLU, U.V., NJUGUNA, J., POLLARD, P. and YATES, K. 2014. Waste to want: polymer nanocomposites using nanoclays extracted from oil based drilling mud waste. IOP conference series: materials science and engineering [online], 64, Article 012023. Available from: https://doi.org/10.1088/1757-899X/64/1/012023

Due to the European Union (EU) waste frame work directive (WFD), legislations have been endorsed in EU member states such as UK for the Recycling of wastes with a vision to prevent and reduce landfilling of waste. Spent oil based drilling mud (drilli... Read More about Waste to want: polymer nanocomposites using nanoclays extracted from oil based drilling mud waste..