All Outputs (121)

The 3rd international conference on structural nano composites (NANOSTRUC2016). (2017)
Journal Article
NJUGUNA, J. 2017. The 3rd international conference on structural nano composites (NANOSTRUC2016). IOP conference series: materials science and engineering [online], 195: proceedings of 3rd International conference on structural nano composites (NANOSTRUC2016): Nanoscience and nanotechnologies; recent advances towards nanoproducts and applications, 12-15 September 2016, Aberdeen, UK, article 011001. Available from: https://doi.org/10.1088/1757-899X/195/1/011001

The Robert Gordon University, Aberdeen hosted The NANOSTRUC 2016 in Aberdeen (Scotland, United Kingdom). The conference focused on 'Nanoscience and Nanotechnologies – Recent Advances towards Nanoproducts and Applications'. It promoted activities in v... Read More about The 3rd international conference on structural nano composites (NANOSTRUC2016)..

Physico‐mechanical properties of nano‐polystyrene‐decorated graphene oxide–epoxy composites. (2017)
Journal Article
KHOBRAGADE, P.S., HANSORA, D.P., NAIK, J.B., NJUGUNA, J. and MISHRA, S. 2017. Physico-mechanical properties of nano polystyrene decorated graphene oxide-epoxy composites. Polymer international [online], 66(10), pages 1402-1409. Available from: https://doi.org/10.1002/pi.5392

In this work, nano polystyrene (nPS) decorated graphene oxide (GO) hybrid nanostructures were successfully synthesized using stepwise micro emulsion polymerization, and characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffractom... Read More about Physico‐mechanical properties of nano‐polystyrene‐decorated graphene oxide–epoxy composites..

Effect of multilayered nanostructures on the physico-mechanical properties of ethylene vinyl acetate-based hybrid nanocomposites. (2017)
Journal Article
KHOBRAGADE, P.S., HANSORA, D.P., NAIK, J.B., NJUGUNA, J. and MISHRA, S. 2018. Effect of multilayered nanostructures on the physico-mechanical properties of ethylene vinyl acetate-based hybrid nanocomposites. Polymer composites [online], 39(10), pages 3519-3527. Available from: https://doi.org/10.1002/pc.24371

Exfoliated graphene oxide (GO) and Mg-Al-layered double hydroxides (LDHs) nanostructures (LDHs@GO)-filled ethylene vinyl acetate (EVA)-based hybrid nanocomposites were prepared by solution reflux technique followed by injection molding. The physico-m... Read More about Effect of multilayered nanostructures on the physico-mechanical properties of ethylene vinyl acetate-based hybrid nanocomposites..

Core-double shell hybrid nanocomposites as multi-functional advanced materials. (2017)
Journal Article
KHOBRAGADE, P.S., HANSORA, D.P., NAIK, J.B., NJUGUNA, J. and MISHRA, S. 2017. Core-double shell hybrid nanocomposites as multi-functional advanced materials. Polymer bulletin [online], 74(11), pages 4681-4700. Available from: https://doi.org/10.1007/s00289-017-1983-5

In this research work, we report circular type silane-modified CaCO3 (as core) nanoparticles (NP) encapsulated with polystyrene (PS) and polymethyl methacrylate (PMMA) (as double shell layers). These core-double shell [CaCO3-PS/PMMA] hybrid nanostruc... Read More about Core-double shell hybrid nanocomposites as multi-functional advanced materials..

Demulsification and recycling of spent oil based drilling fluid as nanofiller for polyamide 6 nanocomposites. (2016)
Thesis
ADEGBOTOLU, U.V. 2016. Demulsification and recycling of spent oil based drilling fluid as nanofiller for polyamide 6 nanocomposites. Robert Gordon University, PhD thesis.

Spent oil-based drilling fluid and cutting wastes are global liabilities due to their hazardous hydrocarbon content, which impacts negatively on flora, fauna, and global carbon footprint. The formulation of two demulsifiers to ensure chemically-enhan... Read More about Demulsification and recycling of spent oil based drilling fluid as nanofiller for polyamide 6 nanocomposites..

Thermal stability, flame retardancy and mechanical properties of polyamide/montmorillonite nanocomposites prepared by melt processing. (2016)
Presentation / Conference Contribution
SIDDIQUE, S., YATES, K. and NJUGUNA, J. 2016. Thermal stability, flame retardancy and mechanical properties of polyamide/montmorillonite nanocomposites prepared by melt processing. Presented at the 3rd International conference on structural nano composites (NANOSTRUC 2016), 12-16 September 2016, Aberdeen, UK.

The increase in thermal stability, flame retardancy, and mechanical properties of Polyamide 6 (PA6)/montmorillonite (MMT) nanocomposites open a new research window in respect to successful technical application of PA6/MMT nanocomposites on the indust... Read More about Thermal stability, flame retardancy and mechanical properties of polyamide/montmorillonite nanocomposites prepared by melt processing..

Abstract book for the proceedings of the 3rd International conference on structural nano composites (NANOSTRUC 2016), 12-15 September 2016, Aberdeen, UK. (2016)
Presentation / Conference Contribution
STAROST, K. and NJUGUNA, J. (eds.) 2016. Abstract book for the proceedings of the 3rd International conference on structural nano composites (NANOSTRUC 2016), 12-15 September 2016, Aberdeen, UK. Berlin: Nanostruc [online]. Available from: https://web.archive.org/web/20180123120946/http://www.nanostruc.info/nanostruc-conference.html

The theme of the 3rd NANOSTRUC 2016 conference is on ‘Nanoscience and Nanotechnologies – Recent Advances towards Nanoproducts and Applications’. The conference is aimed to promote activities in various areas on materials and structures by providing a... Read More about Abstract book for the proceedings of the 3rd International conference on structural nano composites (NANOSTRUC 2016), 12-15 September 2016, Aberdeen, UK..

Preparation and analysis of multi-layered hybrid nanostructures. (2016)
Journal Article
KHOBRAGADE, P.S., HANSORA, D.P., NAIK, J.B., NJUGUNA, J. and MISHRA, S. 2016. Preparation and analysis of multi-layered hybrid nanostructures. Applied clay science [online], 132-133, pages 668-674. Available from: https://doi.org/10.1016/j.clay.2016.08.022

In this study, we report a simple and efficient (bath ultrasonication) method for the preparation of multi-functional layered hybrid nanostructures using graphene oxide (GO) and modified Mg-Al layered double hydroxides (LDH) [LDH@GO]. The functional... Read More about Preparation and analysis of multi-layered hybrid nanostructures..

Stress analysis at the interface of metal-to-metal adhesively bonded joints subjected to 4-point bending: finite element method. (2016)
Journal Article
PRATHURU, A.K., FAISAL, N.H., JIHAN, S., STEEL, J.A. and NJUGUNA, J. 2017. Stress analysis at the interface of metal-to-metal adhesively bonded joints subjected to 4-point bending: finite element method. Journal of adhesion [online], 93(11), pages 855-878. Available from: https://doi.org/10.1080/00218464.2016.1172309

This paper presents a study of stress states in two-dimensional models of metal-to-metal adhesively bonded joints subjected to 4-point flexural loading using the finite element (FE) method. The FE simulations were carried out on adhesive bonded joint... Read More about Stress analysis at the interface of metal-to-metal adhesively bonded joints subjected to 4-point bending: finite element method..

Flexural, impact, rheological and physical characterizations of POM reinforced by carbon nanotubes and paraffin oil. (2016)
Journal Article
YOUSEF, S., VISCO, A., GALTIERI, G and NJUGUNA, J. 2016. Flexural, impact, rheological and physical characterizations of POM reinforced by carbon nanotubes and paraffin oil. Polymers for advanced technologies [online], 27(10), pages 1338-1344. Available from: https://doi.org/10.1002/pat.3801

The paraffin oil dispersion technique innovated in the recent years to synthesize bulk polymer nanocomposite materials has a uniform dispersion. This research work aims to study the effect of added carbon nanotubes (CNTs) on flexural, impact and rheo... Read More about Flexural, impact, rheological and physical characterizations of POM reinforced by carbon nanotubes and paraffin oil..

Thermal, mechanical and rheological behaviors of nanocomposites based on UHMWPE/paraffin oil/carbon nanofiller obtained by using different dispersion techniques. (2016)
Journal Article
VISCO, A., YOUSEF, S., GALTIERI, G., NOCITA, D., PISTONE, A. and NJUGUNA, J. 2016. Thermal, mechanical and rheological behaviors of nanocomposites based on UHMWPE/paraffin oil/carbon nanofiller obtained by using different dispersion techniques. JOM: journal of the Minerals, Metals and Materials Society [online], 68(4), pages 1078-1089. Available from: https://doi.org/10.1007/s11837-016-1845-x

Ultra-high molecular weight polyethylene (UHMWPE) is a very attractive polymer employed as a high performance material. For its high viscosity, dispersion of fillers is considered a critical point in UHMWPE nanocomposites preparation process. Current... Read More about Thermal, mechanical and rheological behaviors of nanocomposites based on UHMWPE/paraffin oil/carbon nanofiller obtained by using different dispersion techniques..

Futuristic nanomaterials and composites: part II. (2015)
Journal Article
KIM, C-S., LEHMHUS, D., NJUGUNA, J., PARAMSOTHY, M. and SHOFNER, M.L. 2015. Futuristic nanomaterials and composites: part II. JOM: journal of the Minerals, Metals and Materials Society [online], 68(1), pages 261-264. Available from: https://doi.org/10.1007/s11837-015-1685-0

The present special topic Futuristic Nanomaterials and Composites: Part II is a continuation of last month's topic Futuristic Nanomaterials and Composites: Part I. In this continuation, inspiration is once again drawn from two conferences: (1) NANOST... Read More about Futuristic nanomaterials and composites: part II..

Wear characterizations of polyoxymethylene (POM) reinforced with carbon nanotubes (POM/CNTs) using the paraffin oil dispersion technique. (2015)
Journal Article
YOUSEF, S., VISCO, A.M., GALTIERI, G. and NJUGUNA, J. 2016. Wear characterizations of polyoxymethylene (POM) reinforced with carbon nanotubes (POM/CNTs) using the paraffin oil dispersion technique. JOM: journal of the Minerals, Metals and Materials Society [online], 68(1), pages 288-299. Available from: https://doi.org/10.1007/s11837-015-1674-3

The wear of polyoxymethylene (POM) is considered a key design parameter of polymer gears and some mechanical applications, and it determines the service time span. This work investigates the influence of carbon nanotubes (CNTs) on the specific wear r... Read More about Wear characterizations of polyoxymethylene (POM) reinforced with carbon nanotubes (POM/CNTs) using the paraffin oil dispersion technique..

Futuristic nanomaterials and composites: part I. (2015)
Journal Article
LEHMHUS, D., NJUGUNA, J. and PARAMSOTHY, M. 2015. Futuristic nanomaterials and composites: part I. JOM: journal of the Minerals, Metals and Materials Society [online], 67(12), pages 2844-2847. Available from: https://doi.org/10.1007/s11837-015-1619-x

The present special topic 'Futuristic Nanomaterials and Composites: Part I' captures the structural as well as functional aspects of nanomaterials and nanocomposites that are unique in some specific way when compared to their microscale counterparts.... Read More about Futuristic nanomaterials and composites: part I..

Compression-after-impact (CAI) performance of epoxycarbon fibre-reinforced nanocomposites using nanosilica and rubber particle enhancement. (2014)
Journal Article
NIKFAR, B. and NJUGUNA, J. 2014. Compression-after-impact (CAI) performance of epoxycarbon fibre-reinforced nanocomposites using nanosilica and rubber particle enhancement. IOP conference series: materials science and engineering [online], 64(1), Article 012009. Available from: https://doi.org/10.1088/1757-899X/64/1/012009

One of the problems in the design of automotive structures and body parts made by fibre reinforced composites is that these materials are susceptible to a small energy impact caused by for instance, accidental tool drop during maintenance or stone st... Read More about Compression-after-impact (CAI) performance of epoxycarbon fibre-reinforced nanocomposites using nanosilica and rubber particle enhancement..

A review on the effect of mechanical drilling on polymer nanocomposites. (2014)
Journal Article
STAROST, K. and NJUGUNA, J. 2014. A review on the effect of mechanical drilling on polymer nanocomposites. IOP conference series: materials science and engineering [online], 64(1), Article 012031. Available from: https://doi.org/10.1088/1757-899X/64/1/012031

Over the past decade, polymer nanocomposites have undergone intensive research and development ensued by its increasing implementation within commercial applications. Consequently, the full life-cycle performance and any health risks associated with... Read More about A review on the effect of mechanical drilling on polymer nanocomposites..

Characterization of synthesized polyurethane/montmorillonite nanocomposites foams. (2014)
Presentation / Conference Contribution
ANSARI, F., SACHSE, S., MICHALOWSKI, S., KAVOSH, M., PIELICHOWSKI, K. and NJUGUNA, J. 2014. Characterization of synthesized polyurethane/montmorillonite nanocomposite foams. IOP conference series: materials science and engineering [online], 64(1), Article 012039. Available from: https://doi.org/10.1088/1757-899X/64/1/012039

Nanophased hybrid composites based on polyurethane/montmorillonite (PU/MMT) have been fabricated. The nanocomposite which was formed by the addition of a polyol premix with 4,4′-diphenylmethane diisocyanate to obtain nanophased polyurethane foams whi... Read More about Characterization of synthesized polyurethane/montmorillonite nanocomposites foams..

Waste to want: polymer nanocomposites using nanoclays extracted from oil based drilling mud waste. (2014)
Journal Article
ADEGBOTOLU, U.V., NJUGUNA, J., POLLARD, P. and YATES, K. 2014. Waste to want: polymer nanocomposites using nanoclays extracted from oil based drilling mud waste. IOP conference series: materials science and engineering [online], 64, Article 012023. Available from: https://doi.org/10.1088/1757-899X/64/1/012023

Due to the European Union (EU) waste frame work directive (WFD), legislations have been endorsed in EU member states such as UK for the Recycling of wastes with a vision to prevent and reduce landfilling of waste. Spent oil based drilling mud (drilli... Read More about Waste to want: polymer nanocomposites using nanoclays extracted from oil based drilling mud waste..

Mechanical and impact performance of three-phase polyamide 6 nanocomposites. (2014)
Journal Article
GENDRE, L., NJUGUNA, J., ABHYANKAR, H. and ERMINI, V. 2015. Mechanical and impact performance of three-phase polyamide 6 nanocomposites. Materials and design [online], 66(Part B), pages 486-491. Available from: https://doi.org/10.1016/j.matdes.2014.08.005

In this work, three-phase nanocomposites using multiscale reinforcements were studied to evaluate the influence of nanofillers on static and dynamic mechanical properties at varying temperature conditions. In particular, short-fibres reinforced polya... Read More about Mechanical and impact performance of three-phase polyamide 6 nanocomposites..

Thermo-mechanical performance of poly(lactic acid)/flax fibre-reinforced biocomposites. (2014)
Journal Article
NASSIOPOULOS, E. and NJUGUNA, J. 2015. Thermo-mechanical performance of poly(lactic acid)/flax fibre-reinforced biocomposites. Materials and design [online], 66(Part B), pages 473-485. Available from: https://doi.org/10.1016/j.matdes.2014.07.051

In this study, the thermo-mechanical performance of flax fibre reinforced poly lactic acid (PLA) biocomposites was investigated for the potential use in load bearing application such as body-in-white and body structures in the automotive sector. Focu... Read More about Thermo-mechanical performance of poly(lactic acid)/flax fibre-reinforced biocomposites..