All Outputs (16)

Thermomechanical deformation analysis of a tubular solid oxide steam electrolysis cell. (2023)
Presentation / Conference Contribution
KURUSHINA, V., RAJENDRAN, V., PRATHURU, A., HOSSAIN, M., FAISAL, N., SOMAN, A., HORRI, B.A. and CAI, Q. 2023. Thermomechanical deformation analysis of a tubular solid oxide steam electrolysis cell. In Proceedings of the 34th Thermal and fluid analysis workshop 2023 (TFAWS 2023), 21-25 August 2023, Maryland, USA. Washington: NASA [online], article number TFAWS23-ID-7. Available from: https://tfaws.nasa.gov/tfaws23/proceedings/

Technologies behind electrolysis cells for hydrogen production are making progress in terms of portability, cost reduction, performance enhancement, prolonged operation, and integration in stacks and with existing power infrastructure. The solid oxid... Read More about Thermomechanical deformation analysis of a tubular solid oxide steam electrolysis cell..

Scalable metamaterial thermally sprayed catalyst coatings for nuclear reactor high temperature solid oxide steam electrolysis. (2023)
Presentation / Conference Contribution
HOSSAIN, M., FAISAL, N., PRATHURU, A., KURUSHINA, V., RAJENDRAN, V., CAI, Q., HORRI, B. and KUMAR, A. 2023. Scalable metamaterial thermally sprayed catalyst coatings for nuclear reactor high temperature solid oxide steam electrolysis. Presented at the 1st IUT (Islamic University of Technology) International conference on mechanical, material and production engineering 2023 (IUT-ICMMPE 2023), 21-22 July 2023, Gaziput, Dhaka.

The UK government in their 2021 Hydrogen Strategy recognises that the low carbon hydrogen plays a critical role in achieving transition to net zero and sets a target of 5GW of low carbon hydrogen production capacity by 2030 for use across the economy... Read More about Scalable metamaterial thermally sprayed catalyst coatings for nuclear reactor high temperature solid oxide steam electrolysis..

Modelling, optimisation and analysis of tubular high temperature solid oxide steam electrolysis cell. (2023)
Presentation / Conference Contribution
KURUSHINA, V., SOMAN, A., RAJENDRAN, V., PRATHURU, A., HOSSAIN, M., AMINI HORRI, B., CAI, Q. and FAISAL, N. 2023. Modelling, optimisation and analysis of tubular high temperature solid oxide steam electrolysis cell. Presented at the 36th Scottish fluid mechanics meetings, 24 May 2023, Glasgow, UK.

High temperature solid oxide steam electrolysis (HTSOSE) is an efficient and ecologically-friendly method of hydrogen production through conversion of the water substance into hydrogen and oxygen, using the heat and electrical energy. The HT SOSE is... Read More about Modelling, optimisation and analysis of tubular high temperature solid oxide steam electrolysis cell..

Materials and meta-data for thermochemical electrolysis. (2023)
Presentation / Conference Contribution
RAJENDRAN, V., MUTHUKRISHNAN, R., BALOGUN, Y., KURUSHINA, V., PRATHURU, A., HOSSAIN, M. and FAISAL, N.H. 2023. Materials and meta-data for thermochemical electrolysis. Presented at the 2023 Scotland's hydrogen economy and the chemical sciences, 23 May 2023, St Andrews, UK.

One of the important challenges is to develop coating materials for thermochemical containment vessels and pipes that encounters the highly corrosive and harsh environment produced by the molten salt at high temperature. Overall assessment based on t... Read More about Materials and meta-data for thermochemical electrolysis..

Modelling, optimisation and analysis of tubular high temperature solid oxide steam electrolysis cell. (2023)
Presentation / Conference Contribution
KURUSHINA, V., SOMAN, A., RAJENDRAN, V., PRATHURU, A., HOSSAIN, M., HORRI, B.A., CAI, Q. and FAISAL, N. 2023. Modelling, optimisation and analysis of tubular high temperature solid oxide steam electrolysis cell. Presented at the 2023 All-energy and dcarbonise conference, 10-11 May 2023, Glasgow, UK.

Developing electrolyser cells with enhanced hydrogen production and their scalable manufacturing can play an important role in enabling not only eco-friendly development but also cost-effective, reliable, and sustainable opportunities. Thermomechanic... Read More about Modelling, optimisation and analysis of tubular high temperature solid oxide steam electrolysis cell..

Structural design and analysis of a high temperature solid oxide steam tubular electrolyser. (2023)
Presentation / Conference Contribution
KURUSHINA, V., SOMAN, A., RAJENDRAN, V., PRATHURU, A., HOSSAIN, M., HORRI, B., CAI, Q. and FAISAL, N. 2023. Structural design and analysis of a high temperature solid oxide steam tubular electrolyser. Presented at the 2023 All things hydrogen conference (ATH23) [online], 14 March 2023, Aberdeen, UK. Available from: https://tinyurl.com/56ut5jjb

The hydrogen production is an active area of the innovation and development in the perspective of the next decade, with the relative dominance of the alkaline, proton exchange and solid oxide (SO) technology. The gradual maturity of the latter techno... Read More about Structural design and analysis of a high temperature solid oxide steam tubular electrolyser..

Scalable metamaterial thermally sprayed catalyst coatings for nuclear reactor high temperature solid oxide steam electrolysis. (2022)
Presentation / Conference Contribution
HOSSAIN, M., FAISAL, N., PRATHURU, A., KURUSHINA, V., CAI, Q., HORRI, B. and SOMAN, A. 2022. Scalable metamaterial thermally sprayed catalyst coatings for nuclear reactor high temperature solid oxide steam electrolysis. Presented at the 4th International conference on energy and power 2022 (ICEP2022), 11-13 December 2022, Dhaka, Bangledesh: [virtual conference].

The UK government in their 2021 Hydrogen Strategy recognises that the low carbon hydrogen plays a critical role in achieving transition to net zero and sets a target of 5GW of low carbon hydrogen production capacity by 2030 for use across the economy... Read More about Scalable metamaterial thermally sprayed catalyst coatings for nuclear reactor high temperature solid oxide steam electrolysis..

Numerical simulation of flow-induced forces on subsea structures in a group under uniform and sheared flow. (2022)
Presentation / Conference Contribution
ANNAPEH, H.F. and KURUSHINA, V. 2022. Numerical simulation of flow-induced forces on subsea structures in a group under uniform and sheared flow. In Dimitrovová, Z., Biswas, P., Gonçalves, R. and Silva, T. (eds.) Recent trends in wave mechanics and vibrations: proceedings of the 10th International conference on wave mechanics and vibrations (WMVC 2022), 4-6 July 2022, Lisbon, Portugal. Mechanisms and machine science, 125. Cham: Springer [online], pages 512-522. Available from: https://doi.org/10.1007/978-3-031-15758-5_52

Subsea production systems design requires estimates of hydrodynamic loads related to characteristics of structures and the external flow. The current work investigates flow-induced forces for a group of stationary rigid structures modelled in 2D incl... Read More about Numerical simulation of flow-induced forces on subsea structures in a group under uniform and sheared flow..

Effect of gap and diameter ratio on vortex-induced forces for cylinders in tandem at Re=100. (2022)
Presentation / Conference Contribution
ANNAPEH, H.F. and KURUSHINA, V. 2022. Effect of gap and diameter ratio on vortex-induced forces for cylinders in tandem at Re=100. Journal of physics: conference series [online], 2219: proceedings of the 4th International conference on modeling, simulation and optimization technologies and applications (MSOTA2021), 17-18 December 2021, [virtual event], article number 012021. Available from: https://doi.org/10.1088/1742-6596/2219/1/012021

The article investigates fluctuations of the vortex-induced loads related to the effects of gap and diameter ratio on the mean drag and lift coefficients of the downstream cylinder, when two circular stationary cylinders of different diameters are ar... Read More about Effect of gap and diameter ratio on vortex-induced forces for cylinders in tandem at Re=100..

A one-dimensional mechanistic model for tracking unsteady slug flow. (2021)
Presentation / Conference Contribution
PADRINO, J.C., SRINIL, N., KURUSHINA, V., SWAILES, D., PAIN, C.C. and MATAR, O.K. 2021. A one-dimensional mechanistic model for tracking unsteady slug flow. In Proceedings of the 2021 ASME international mechanical engineering congress and exposition (IMECE2021), 1-5 November 2021, [virtual event]. New York: ASME [online], volume 10: fluids engineering, article number V010T10A004. Available from: https://doi.org/10.1115/IMECE2021-70735

A novel one-dimensional slug tracking mechanistic model for unsteady, upward gas-liquid slug flow in inclined pipes is presented. The model stems from the first principles of mass and momentum conservation applied to a slug unit cell consisting of a... Read More about A one-dimensional mechanistic model for tracking unsteady slug flow..

Influence of combined empirical functions on slug flow predictions of pipelines with variable inclinations. (2020)
Presentation / Conference Contribution
ZANGANEH, H., KURUSHINA, V., SRINIL, N. and MATAR, O.K. 2020. Influence of combined empirical functions on slug flow predictions of pipelines with variable inclinations. In Proceedings of the 39th ASME international conference on ocean, offshore and arctic engineering (OMAE 2020), 3-7 August 2020, [virtual event]. New York: ASME [online], volume 4: pipelines, risers and subsea systems, paper number OMAE2020-18027, V004T04A025. Available from: https://doi.org/10.1115/OMAE2020-18027

Prediction of internal multiphase flows in subsea pipelines is an integral part of the oil and gas production system design. High mass and pressure fluctuations are often encountered during the operation with a liquid-gas slug flow regime exhibiting... Read More about Influence of combined empirical functions on slug flow predictions of pipelines with variable inclinations..

Technologies of polytechnic education in global benchmark higher education institutions. (2018)
Presentation / Conference Contribution
KURUSHINA, V.A., KURUSHINA, E.V. and ZEMENKOVA, M.Y. 2018. Technologies of polytechnic education in global benchmark higher education institutions. IOP conference series: materials science and engineering [online], 357: proceedings of the International conference on transport and storage of hydrocarbons, 10-12 January 2018, Tyumen, Russia, article number 012028. Available from: https://doi.org/10.1088/1757-899X/357/1/012028

Russian polytechnic education is going through a sequence of transformations that started with the introduction of bachelor and master degrees into higher education instead of the previous "specialists". The next stage of reformation in Russian polyt... Read More about Technologies of polytechnic education in global benchmark higher education institutions..

Fluid nonlinearities effect on wake oscillator model performance. (2018)
Presentation / Conference Contribution
KURUSHINA, V. and PAVLOVSKAIA, E. 2018. Fluid nonlinearities effect on wake oscillator model performance. In Manoach, E., Stoykov, S. and Wiercigroch, M. (eds.) Proceedings of the 2017 International conference on engineering vibration (ICoEV 2017), 4-7 September 2017, Sofia, Bulgaria. MATEC web of conferences, 148. Les Ulis: EDP Sciences [online], paper number 04002. Available from: https://doi.org/10.1051/matecconf/201814804002

Vortex-induced vibrations (VIV) need to be accounted for in the design of marine structures such as risers and umbilicals. If a resonance state of the slender structure develops due to its interaction with the surrounding fluid flow, the consequences... Read More about Fluid nonlinearities effect on wake oscillator model performance..

Wake oscillator equations in modelling vortex-induced vibrations at low mass ratios. (2017)
Presentation / Conference Contribution
KURUSHINA, V. and PAVLOVSKAIA, E. 2017. Wake oscillator equations in modelling vortex-induced vibrations at low mass ratios. In Proceedings of the 2017 Marine Technology Society and Institute of Electrical and Electronics Engineers (MTS/IEEE) OCEANS conference (OCEANS 2017 MTS/IEEE), 19-22 June 2017, Aberdeen, UK. Piscataway: IEEE [online], article number 8084644. Available from: https://doi.org/10.1109/OCEANSE.2017.8084644

The current research explores the capabilities of Rayleigh and Van der Pol equations from the standpoint of accuracy of vortex-induced vibrations (VIV) modelling for low mass ratio cases. The two degree-of-freedom rigid structure model suggested by P... Read More about Wake oscillator equations in modelling vortex-induced vibrations at low mass ratios..

Technology audit: assessment of innovative portfolio. (2016)
Presentation / Conference Contribution
KURUSHINA, V., KURUSHINA, E. and SHABAROV, A. 2016. Technology audit: assessment of innovative portfolio. In Maltseva, T. (ed.) Proceedings of the 15th International conference on topical problems of architecture, civil engineering, energy efficiency and ecology (TPACEE 2016), 27-29 April 2016, Tyumen, Russia. MATEC web of conferences, 73. Les Ulis: EDP Sciences [online], paper number 07028. Available from: https://doi.org/10.1051/matecconf/20167307028

The article discusses features of technological audit performance in Russian oil and gas companies. To measure the innovation quality level, the scale was developed based on the theory of inventive problem solving and the theory of technological stru... Read More about Technology audit: assessment of innovative portfolio..

Innovative cyclical development of the Russian pipeline system. (2014)
Presentation / Conference Contribution
KURUSHINA, V. and ZEMENKOV, Y. 2014. Innovative cyclical development of the Russian pipeline system. In Brebbia, C.A., Magaril, E.R. and Khodorovsky, M.Y. (eds.) Energy production and management in the 21st century: the quest for sustainable energy: proceedings of the 1st International conference on energy production and management (Energy Quest 2014), 23-25 April 2014, Ekaterinburg, Russia. WIT transactions on ecology and the environment, 190. Southampton: WIT Press [online], pages 881-888. Available from: https://doi.org/10.2495/EQ140822

This paper examines the identification of patterns of innovative development in the Russian pipeline system. An evaluation system based on the theory of technological innovation cycles is proposed. The innovation cycles identification scheme, in term... Read More about Innovative cyclical development of the Russian pipeline system..